Camaro Caliper Brackets

[chopper john]

hey john , thanks for the fast great service. i didnt even think that you had the check yet. all the parts are a+++. i have a few questions. !should i run a disc/disc prop valve ? 2 does it matter what chamber on the master is for front and witch is for rear or does it matter. thanks

[Captainfab]

You can either run a disc/disc prop valve, or just plumb it direct from the MC and plumb in an adjustable prop valve in the rear line. Yes it does matter which line goes where. The ports have two different thread sizes.....I don't remember which one is which size. I'll check and get back to you.

Originally Posted by chopper john

hey john , thanks for the fast great service. i didnt even think that you had the check yet. all the parts are a+++. i have a few questions. !should i run a disc/disc prop valve ? 2 does it matter what chamber on the master is for front and witch is for rear or does it matter. thanks

[Captainfab]

Sorry I didn't get back sooner....been really busy.

Any way on the Corvette master it looks like the front port which is a 1/2-20 thread is for the front brakes and of course the rear port which is 9/19-18 thread is rear brakes. If you need anything else let me know.