New 64 Stepper Project - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Joe Pass** · 04-12-2021, 08:40 PM

This is Great.....well done....

**cwcarpenter98** · 04-12-2021, 10:16 PM

Ohhhhhh snap, look at that shine

**pdxhall** · 04-13-2021, 11:48 AM

It sure looks nice out in the daylight. I know what you mean about so many little things to finish up at this stage.

aggie91 · 04-14-2021, 01:27 PM

Truck is looking good Master Chief!

My son is up at the RTC for training to be a MR. Lots of holds and waiting because of COVID, he is so ready for his first assignment.

**The Rocknrod** · 04-14-2021, 01:45 PM

MR is cool, he won't be cleaning sewer pipes. Thanks for the thumbs up.

SCOTI · 04-14-2021, 02:29 PM

Any obvious 'Uh-Oh' from the 1st driveway testing?

**The Rocknrod** · 04-14-2021, 02:39 PM

Quote:

Originally Posted by SCOTI

Any obvious 'Uh-Oh' from the 1st driveway testing?

Ohhhhh ya.
Needs mufflers bad.

SCOTI · 04-14-2021, 06:27 PM

Well.... That was probably a given.

88Stanger · 04-14-2021, 06:41 PM

That is so awesome!!!

**The Rocknrod** · 04-21-2021, 05:06 AM

Went to Graves Custom Exhaust here in the Waco area yesterday and got it done. 2.25" pipes, resonators and Walker SoundFX mufflers. Could have done without the resonators maybe, pretty quiet. On a positive note the radio now sounds great.

**clemdaddy** · 04-21-2021, 07:59 AM

Man, you're doing it right... great job. I'm sorry I didn't check out your build sooner but we're on board now and really appreciate seeing it come together.

**The Rocknrod** · 04-21-2021, 11:22 AM

Quote:

Originally Posted by clemdaddy

Man, you're doing it right... great job. I'm sorry I didn't check out your build sooner but we're on board now and really appreciate seeing it come together.

Thanks, I really like your work.

**The Rocknrod** · 04-23-2021, 05:44 PM

Took my seat frame material, foam etc down to Ed's Upholstery here in Waco.
Fabed up some front license brackets and had them powder-coated right here in China Spring. Pic makes em look straight, they're not. They're leaned back.

roll_the_dice · 04-23-2021, 06:08 PM

Coming right along! Brackets looks good!

**The Rocknrod** · 04-26-2021, 10:39 AM

I went to the county tax office and got the truck registered, year of make license plates done. $65 bucks for 5 years works for me.

**Joe Pass** · 04-26-2021, 11:35 AM

Ugggg I'm not so lucky here in Cal.....$198 a year for mine for a commercial tag since its a truck....no emissions test thank god since I'm a diesel vin and below 1995....thank god

aggie91 · 04-26-2021, 04:25 PM

Quote:

Originally Posted by The Rocknrod

I went to the county tax office and got the truck registered, year of make license plates done. $65 bucks for 5 years works for me.

I guessing you went with the "antique auto" for the registration? I am trying to decide on how I want to register mine...

**The Rocknrod** · 04-26-2021, 04:36 PM

Quote:

Originally Posted by aggie91

I guessing you went with the "antique auto" for the registration? I am trying to decide on how I want to register mine...

Ya not planning on taking this to work.

And no inspection? quick and done.

**The Rocknrod** · 05-05-2021, 04:41 PM

Got the windshield installed at Freddy's Glass in Waco. I guess the third windshield was a charm.

Rear glass done also.

**pdxhall** · 05-08-2021, 01:04 PM

The glass looks great. Did I miss something on "the 3rd time's a charm" comment. I'm very close to having my front and rear glass installed and you've got me scared.

**The Rocknrod** · 05-08-2021, 02:10 PM

They broke the first one, second one scratched it...

**The Rocknrod** · 05-27-2021, 10:29 AM

Took it to the upholstery shop in Waco to get the carpet, back wall and kick panels done.
Been waiting on wheels for two months.

**The Rocknrod** · 05-29-2021, 09:23 AM

Got the truck home, looks okay. Re-adjusting the throttle cable length now. Then I'll put in the seat.
Drivers door won't close all the way due to the press on door seals, may have to grease it up in a couple places and play with it to see if I can get it to sit right.

**The Rocknrod** · 05-29-2021, 01:02 PM

Put the seat in.

roll_the_dice · 05-29-2021, 02:38 PM

Looks great...well done!

04-12-2021, 08:40 PM	#426
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project This is Great.....well done.... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

04-12-2021, 10:16 PM	#427
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: New 64 Stepper Project Ohhhhhh snap, look at that shine __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

04-13-2021, 11:48 AM	#428
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,055	Re: New 64 Stepper Project It sure looks nice out in the daylight. I know what you mean about so many little things to finish up at this stage. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

04-14-2021, 01:27 PM	#429
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: New 64 Stepper Project Truck is looking good Master Chief! My son is up at the RTC for training to be a MR. Lots of holds and waiting because of COVID, he is so ready for his first assignment. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

04-14-2021, 01:45 PM	#430
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project MR is cool, he won't be cleaning sewer pipes. Thanks for the thumbs up. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-14-2021, 02:29 PM	#431
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: New 64 Stepper Project Any obvious 'Uh-Oh' from the 1st driveway testing? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-14-2021, 06:27 PM	#433
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: New 64 Stepper Project Well.... That was probably a given. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-14-2021, 06:41 PM	#434
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: New 64 Stepper Project That is so awesome!!! __________________ John 3:16 - Saved me... God Bless

04-21-2021, 05:06 AM	#435
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Went to Graves Custom Exhaust here in the Waco area yesterday and got it done. 2.25" pipes, resonators and Walker SoundFX mufflers. Could have done without the resonators maybe, pretty quiet. On a positive note the radio now sounds great. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 04-21-2021 at 05:44 AM.

04-21-2021, 07:59 AM	#436
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: New 64 Stepper Project Man, you're doing it right... great job. I'm sorry I didn't check out your build sooner but we're on board now and really appreciate seeing it come together.

04-23-2021, 05:44 PM	#438
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Took my seat frame material, foam etc down to Ed's Upholstery here in Waco. Fabed up some front license brackets and had them powder-coated right here in China Spring. Pic makes em look straight, they're not. They're leaned back. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-23-2021, 06:08 PM	#439
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Coming right along! Brackets looks good! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

04-26-2021, 10:39 AM	#440
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I went to the county tax office and got the truck registered, year of make license plates done. $65 bucks for 5 years works for me. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-26-2021, 11:35 AM	#441
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Ugggg I'm not so lucky here in Cal.....$198 a year for mine for a commercial tag since its a truck....no emissions test thank god since I'm a diesel vin and below 1995....thank god __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

05-05-2021, 04:41 PM	#444
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the windshield installed at Freddy's Glass in Waco. I guess the third windshield was a charm. Rear glass done also. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

05-08-2021, 01:04 PM	#445
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,055	Re: New 64 Stepper Project The glass looks great. Did I miss something on "the 3rd time's a charm" comment. I'm very close to having my front and rear glass installed and you've got me scared. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

05-08-2021, 02:10 PM	#446
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project They broke the first one, second one scratched it... __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-27-2021, 10:29 AM	#447
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Took it to the upholstery shop in Waco to get the carpet, back wall and kick panels done. Been waiting on wheels for two months. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 09:23 AM	#448
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the truck home, looks okay. Re-adjusting the throttle cable length now. Then I'll put in the seat. Drivers door won't close all the way due to the press on door seals, may have to grease it up in a couple places and play with it to see if I can get it to sit right. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 01:02 PM	#449
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Put the seat in. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 02:38 PM	#450
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Looks great...well done! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.