Project I did it again - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 07-31-2010, 07:53 PM

well any progress

2manyprojects · 07-31-2010, 08:49 PM

Quote:

Originally Posted by Dasani

Glad it went to a good home.

Thanks, I'm going to work on getting it striped and painted soon, so I can speed up the process of building my unoriginal truck lol.

Quote:

Originally Posted by 67chevy1series

well any progress

I got something accomplished today. I had planed to get some done this last week. Work kept me busy. People were tearing stuff up and generaly annoying me. To top it off they damaged a $200,000 plus custom vehicle that I just bought at the end of May.

2manyprojects · 07-31-2010, 08:57 PM

I'm waiting on parts to get the tank finished. I pulled the seat and cleaned 40yrs worth of trash out. I found more rust than I was expecting but it's still not too bad. My welder needs to get used anyway. I'm going to drop the seat off at the upholstery shop Monday.

2manyprojects · 07-31-2010, 09:01 PM

more pics

2manyprojects · 07-31-2010, 09:04 PM

rust

67chevy1series · 08-03-2010, 08:53 PM

wow nice job on the cleanin

VA72C10 · 08-04-2010, 12:18 AM

Looks pretty clean to me for around here. Really like that dominion emblem!

67chevy1series · 08-05-2010, 11:15 PM

ya it must be a good rare item

2manyprojects · 08-05-2010, 11:55 PM

Quote:

Originally Posted by 67chevy1series

wow nice job on the cleanin

Thanks, It needed it. I had to dig to find the seat bolts lol.

Quote:

Originally Posted by VA72C10

Looks pretty clean to me for around here. Really like that dominion emblem!

It is pretty clean for around here. I wasn't expecting the rust under the gas pedal Ive never seen that before. The Dominion Emblem is cool, that was a nice surprise.

Quote:

Originally Posted by 67chevy1series

ya it must be a good rare item

Ive only seen a couple of them. Dominion Chevrolet is still open. The original location where this Truck was sold is now a Home Depot.

Some of my parts showed up. I haven't made any progress, Ive been working out of town everyday.

67chevy1series · 08-06-2010, 01:31 PM

thats sucks

seriously a home depot

well hope you can get a little somthin done

67chevy1series · 08-12-2010, 03:25 AM

you wanted to no if i had a build thread well now i do so if you wanna check it out you can

2manyprojects · 08-12-2010, 09:07 AM

Quote:

Originally Posted by 67chevy1series

thats sucks

seriously a home depot

well hope you can get a little somthin done

I havent done much lately. Ive been busy with work. I tried to put the new ignition switch in last night so I can stop hot wiring, but I ordered the wrong bezel. I need the early 67 version.

I'm off tomorrow and taking a Rd trip to Top Bannana. Then I'm meeting up with some friends and going to the AACA show in Blacksburg VA Saturday. Hopefully I will pick up some parts.

Quote:

Originally Posted by 67chevy1series

you wanted to no if i had a build thread well now i do so if you wanna check it out you can

I'll be sure to take a look.

propanemudtruck · 08-12-2010, 01:09 PM

Quote:

Originally Posted by 2manyprojects

People were tearing stuff up and generaly annoying me. To top it off they damaged a $200,000 plus custom vehicle that I just bought at the end of May.

Not to be nosey, but what vehicle might that be? It sucks that people gotta be that way.

67chevy1series · 08-12-2010, 02:03 PM

well hope you get your 67 all smoothed out for its rd trip

2manyprojects · 08-12-2010, 06:37 PM

Quote:

Originally Posted by propanemudtruck

Not to be nosey, but what vehicle might that be? It sucks that people gotta be that way.

It's cool, I'm the fleet manager for a blood bank. It was a 2011 IC Bloodmobile. Someone bottomed out the back end hard, pushed the step up 2 inches and buckled the door . The pic is when I dropped it off after it left the body shop. Let the Dracula jokes begin

Quote:

Originally Posted by 67chevy1series

well hope you get your 67 all smoothed out for its rd trip

I wish I was driving the 67 it's not quite there yet. I'm taking the Blazer this time

2manyprojects · 09-04-2010, 02:29 PM

I know I'm a slacker about updating this. I got a late start and got to Top Banana too late to check out the store. I did go over to key parts and saw their rides, very nice.
I headed on to VA Tech for the show. there were lots of cars there but not many trucks I didn't see any 67-72 there were a few AD trucks a 73 or74 a few fords and a sweet old fire truck. my buddy is a firefighter he was drooling over that one.

I didn't get any parts.

2manyprojects · 09-04-2010, 02:33 PM

more show

2manyprojects · 09-04-2010, 02:37 PM

Got my tank in. I might pull it back out and pressure wash the floor. There was a open bag of fertilizer under the seat I still haven't got it all out.

2manyprojects · 09-04-2010, 02:59 PM

I bought a 67 short bed parts truck this morning. The bed needs some floor work but other wise seems to be in good shape. It is a 67 bed someone just screwed marker lenses to the side. The cab is rough but the truck has lots of good parts that I can use. He has a 68 C30 I'm debating picking up also.

I am going to sell the frame and cab cheap after I get what I want off of it. Like $100.00 to cover my gas . It has a 5lug front 6lug rear. If anyone is interested let me know. I cant keep it long, someone save it from the scrap metal place.

2manyprojects · 09-05-2010, 11:14 PM

I went and picked up my pile of parts this afternoon. I got a rust free hood, grill and Left 68 fender out of the deal. Considering the bed is worth more than what I paid for the truck. I came out pretty good.

I did learn some things. Come alonging a truck on to a trailer sucks, doing it with 2 flat tires sucks really bad. Dad might get a winch for Christmas.
Don't stick your arm in places with out looking first. I pulled it out completely covered in red ants pit to fingertips, they do bite lol.

67chevy1series · 09-06-2010, 04:24 AM

sweet

VA72C10 · 09-06-2010, 10:57 AM

Great STEAL!!! on that truck man! Glad you got it...I was going to try to get my buddy to take his trailer down but he worked over the weekend. How is the bed? It looked decent in the pictures and like you said, the entire price of the truck online was 1/2 to 1/3 of what a decent shortbed sells for so even if it's rusty you still SCORED...you can part that thing out for about 5-6X what you paid EASILY....

can you tell I'm jealous

Great score! Should help big time on your project!

VA72C10 · 09-06-2010, 10:59 AM

man, put the shortbed frame complete on craigslist for 300-500...you'll probably sell it fast. I've had offers for my bare frame (with title) for 400-500.

VA72C10 · 09-06-2010, 11:01 AM

and put the cab up for 100 by itself....it will sell

some guys have worse

2manyprojects · 09-06-2010, 12:57 PM

Quote:

Originally Posted by VA72C10

Great STEAL!!! on that truck man! Glad you got it...I was going to try to get my buddy to take his trailer down but he worked over the weekend. How is the bed? It looked decent in the pictures and like you said, the entire price of the truck online was 1/2 to 1/3 of what a decent shortbed sells for so even if it's rusty you still SCORED...you can part that thing out for about 5-6X what you paid EASILY....

can you tell I'm jealous

Great score! Should help big time on your project!

Quote:

Originally Posted by VA72C10

man, put the shortbed frame complete on craigslist for 300-500...you'll probably sell it fast. I've had offers for my bare frame (with title) for 400-500.

I ended up getting it for less than the asking price. I should feel guilty lol. The bed floor is rusty and the right bed side is folded under at the bottom but overall it is pretty nice. The frame is shot someone butt welded the 5 lug clip to the frame instead of swapping the cross member. That was a unpleasant surprise when I pulled the cab this AM. I'm heading back down there in a few minutes I will post some more pics later.

07-31-2010, 07:53 PM	#26
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again well any progress

07-31-2010, 08:57 PM	#28
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again I'm waiting on parts to get the tank finished. I pulled the seat and cleaned 40yrs worth of trash out. I found more rust than I was expecting but it's still not too bad. My welder needs to get used anyway. I'm going to drop the seat off at the upholstery shop Monday. Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

07-31-2010, 09:01 PM	#29
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again more pics Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

07-31-2010, 09:04 PM	#30
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again rust Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

08-03-2010, 08:53 PM	#31
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again wow nice job on the cleanin

08-04-2010, 12:18 AM	#32
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project I did it again Looks pretty clean to me for around here. Really like that dominion emblem! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-05-2010, 11:15 PM	#33
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again ya it must be a good rare item

08-06-2010, 01:31 PM	#35
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again thats sucks seriously a home depot well hope you can get a little somthin done

08-12-2010, 03:25 AM	#36
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again you wanted to no if i had a build thread well now i do so if you wanna check it out you can

08-12-2010, 02:03 PM	#39
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again well hope you get your 67 all smoothed out for its rd trip Last edited by 67chevy1series; 08-12-2010 at 02:03 PM.

09-04-2010, 02:29 PM	#41
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again I know I'm a slacker about updating this. I got a late start and got to Top Banana too late to check out the store. I did go over to key parts and saw their rides, very nice. I headed on to VA Tech for the show. there were lots of cars there but not many trucks I didn't see any 67-72 there were a few AD trucks a 73 or74 a few fords and a sweet old fire truck. my buddy is a firefighter he was drooling over that one. I didn't get any parts. Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

09-04-2010, 02:33 PM	#42
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again more show Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

09-04-2010, 02:37 PM	#43
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again Got my tank in. I might pull it back out and pressure wash the floor. There was a open bag of fertilizer under the seat I still haven't got it all out. Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

09-04-2010, 02:59 PM	#44
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again I bought a 67 short bed parts truck this morning. The bed needs some floor work but other wise seems to be in good shape. It is a 67 bed someone just screwed marker lenses to the side. The cab is rough but the truck has lots of good parts that I can use. He has a 68 C30 I'm debating picking up also. I am going to sell the frame and cab cheap after I get what I want off of it. Like $100.00 to cover my gas . It has a 5lug front 6lug rear. If anyone is interested let me know. I cant keep it long, someone save it from the scrap metal place. Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

09-05-2010, 11:14 PM	#45
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Project I did it again I went and picked up my pile of parts this afternoon. I got a rust free hood, grill and Left 68 fender out of the deal. Considering the bed is worth more than what I paid for the truck. I came out pretty good. I did learn some things. Come alonging a truck on to a trailer sucks, doing it with 2 flat tires sucks really bad. Dad might get a winch for Christmas. Don't stick your arm in places with out looking first. I pulled it out completely covered in red ants pit to fingertips, they do bite lol. Attached Images __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.



Register or Log In To remove these advertisements.

09-06-2010, 04:24 AM	#46
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project I did it again sweet

09-06-2010, 10:57 AM	#47
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project I did it again Great STEAL!!! on that truck man! Glad you got it...I was going to try to get my buddy to take his trailer down but he worked over the weekend. How is the bed? It looked decent in the pictures and like you said, the entire price of the truck online was 1/2 to 1/3 of what a decent shortbed sells for so even if it's rusty you still SCORED...you can part that thing out for about 5-6X what you paid EASILY.... can you tell I'm jealous Great score! Should help big time on your project! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-06-2010, 10:59 AM	#48
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project I did it again man, put the shortbed frame complete on craigslist for 300-500...you'll probably sell it fast. I've had offers for my bare frame (with title) for 400-500. __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-06-2010, 11:01 AM	#49
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project I did it again and put the cab up for 100 by itself....it will sell some guys have worse __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.