1973-1991 Dual fuel tank systems theory of operation

[Dleslie212]

Originally Posted by MiniD

It is not possible to wire it so the returns go to the "wrong" tank. The tank switch switches both the supply and return with the same signal. It is possible to wire it so that the wrong tank is selected but the supply should be coupled to the return.

Of course, there are ways to screw that up but they involve re-plumbing your fuel lines. Just re-wiring can't do that.

That's what I was thinking. I can easily just cross the return lines, but it bugs me not knowing why that's happening

[Dleslie212]

I went ahead and replaced the six port valve today, just to make sure it wasn't a problem with the valve itself. As I was connecting the six lines, I double checked the paperwork/diagram and the routing of the lines to make sure everything was in the correct spot.

Right now, both my tanks are fairly full. I filled them a few weeks ago, drove maybe 20 miles, and since then has been just idling in the driveway a total of maybe 20 minutes - so both the tanks are still pretty full. I don't have a fuel gauge hooked up just yet.

When running on one tank, if given long enough, the opposite tank starts spewing gas, as if the returns were backwards but they're not. If I switch tanks when the spewing begins, it will stop spewing after a second, and after awhile start spewing from the opposite tank

The strange part is that, before I swapped the valve today, the old valve and lines had been in place for almost three years with no problems, even with both tanks completely full. Nothing ha changed between now and then except for a complete rewire of the truck, selector switch included. Tanks, senders, straps, fuel lines and regulator were all replaced at the same time about three years ago.

Anyone have any ideas?

[SunSoaked]

Originally Posted by Dleslie212

I went ahead and replaced the six port valve today, just to make sure it wasn't a problem with the valve itself. As I was connecting the six lines, I double checked the paperwork/diagram and the routing of the lines to make sure everything was in the correct spot.

Right now, both my tanks are fairly full. I filled them a few weeks ago, drove maybe 20 miles, and since then has been just idling in the driveway a total of maybe 20 minutes - so both the tanks are still pretty full. I don't have a fuel gauge hooked up just yet.

When running on one tank, if given long enough, the opposite tank starts spewing gas, as if the returns were backwards but they're not. If I switch tanks when the spewing begins, it will stop spewing after a second, and after awhile start spewing from the opposite tank

The strange part is that, before I swapped the valve today, the old valve and lines had been in place for almost three years with no problems, even with both tanks completely full. Nothing ha changed between now and then except for a complete rewire of the truck, selector switch included. Tanks, senders, straps, fuel lines and regulator were all replaced at the same time about three years ago.

Anyone have any ideas?

Do have a charcoal canister and is it connected to the vent line?

[Dleslie212]

Originally Posted by SunSoaked

Do have a charcoal canister and is it connected to the vent line?

No charcoal canister. The vents on the two tanks are teed together by the selector valve, with a single line running up to a breather under the hood. But no canister

[hatzie]

The charcoal canister isn't a big deal to plumb and it isn't a performance hit.
It's only three connections.

1. a vacuum line from the valve to a ported vacuum source,
2. a tee to the PCV valve for the purge port on the canister
3. a connection to the vents on the tanks

[Dleslie212]

Originally Posted by hatzie

The charcoal canister isn't a big deal to plumb and it isn't a performance hit.
It's only three connections.

1. a vacuum line from the valve to a ported vacuum source,
2. a tee to the PCV valve for the purge port on the canister
3. a connection to the vents on the tanks

How would a charcoal canister keep gas from spewing out of the tanks?