|
02-16-2013, 09:05 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Spotted!
Spotted this in a drive way on the way to the local gun store. Needed some .40 & .380 cal ammo.
Nice looking truck. I saw it on the road about a month ago and wondered where it lived. Hadn't seen it before and live less than 5 miles from me.I asked at the gun store if they knew him and it was his brother-in-laws truck. I left him a buisness card and ask for him to call me.     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
02-16-2013, 09:06 PM
|
#2 |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,339
|
Re: Spotted!
From a distance it does look sweet. An anniversary truck?
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
|
|
|
02-16-2013, 09:21 PM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: Queen Creek, AZ
Posts: 551
|
Re: Spotted!
Looks good to me! Good luck Andy!
Posted via Mobile Device
__________________
Weev- Life's tough...... It's even tougher when your stupid - John Wayne |
|
|
|
|
02-16-2013, 09:22 PM
|
#4 |
|
Registered User
 
Join Date: Mar 2011
Location: Valley of the Sunstroke, Arizona
Posts: 1,210
|
Re: Spotted!
nevermind that... was the ammo available?
__________________
My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131 |
|
|
|
|
02-16-2013, 09:24 PM
|
#5 | |
|
Registered User
Join Date: Sep 2012
Location: Queen Creek, AZ
Posts: 551
|
Re: Spotted!
Quote:
Posted via Mobile Device
__________________
Weev- Life's tough...... It's even tougher when your stupid - John Wayne |
|
|
|
|
|
02-16-2013, 09:30 PM
|
#6 |
|
Proprietor of Dale's Corner
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,834
|
Re: Spotted!
good thing you're not in Cali , I have a range at my house and its legal to shoot but the last month the sheriff shows up to check up on what guns we're shooting and my targets(make sure I'm not poaching)never been a problem before.
Posted via Mobile Device
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
|
|
|
|
02-16-2013, 10:14 PM
|
#7 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Spotted!
The truck is nice and it looks to be a real annversary truck. It has the tool box on it also. I just want to get up close to it and talk to him about the site, not to buy it.
Quote:
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
02-16-2013, 11:15 PM
|
#8 |
|
Registered User
Join Date: Mar 2011
Location: Brandon,Iowa
Posts: 391
|
Re: Spotted!
It has the tool box on it also.
I see a topper ,,, where do you see a toolbox ? |
|
|
|
|
02-17-2013, 02:01 AM
|
#9 |
|
Senior Member
Join Date: Aug 2010
Location: North Alabama
Posts: 1,029
|
Re: Spotted!
Very nice truck. How are you guys getting ammo.? I live in Alaska and I haven't been able to buy .380 in weeks! Maybe guys up here are just hoarding more of it? Anyway good luck with the truck.
Ol Blue K20...That's why I left Cali. My next door neighbor is a Alaska State Trooper and we shoot crap on the property all the time. They know better than to step on Alaskans property.
__________________
1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins |
|
|
|
|
02-17-2013, 02:04 AM
|
#10 | |
|
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: Spotted!
Quote:
Posted via Mobile Device |
|
|
|
|
|
02-17-2013, 02:30 AM
|
#11 |
|
Senior Member
Join Date: Aug 2010
Location: North Alabama
Posts: 1,029
|
Re: Spotted!
Don't worry Mister-B. I have something else for that
__________________
1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins |
|
|
|
|
02-17-2013, 02:42 AM
|
#12 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Spotted!
Quote:
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
02-17-2013, 01:15 PM
|
#13 | |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Spotted!
Quote:
There's a factory toolbox built into the passenger side of some trucks.A rarelyfound in good shape option.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
|
02-17-2013, 07:50 PM
|
#14 |
|
Registered User
Join Date: Mar 2011
Location: Brandon,Iowa
Posts: 391
|
Re: Spotted!
I know about the optional bed-side toolbox,, My orange C20 has one,, and yes,, rare to find the door in good shape. They were a very poor design with no drain holes. I did not know that Andy 4639 was local to the truck and had viewed the truck from the right hand side, I was going off of the pictures originally posted.
Tom |
|
|
|
|
02-17-2013, 09:13 PM
|
#15 |
|
Registered User
Join Date: Jul 2012
Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!!
Posts: 537
|
Re: Spotted!
pretty sure this truck was for sale on Asheville NC CL around Christmas for about $12K.
|
|
|
|
|
02-17-2013, 09:47 PM
|
#16 |
|
Account Suspended
Join Date: Jun 2012
Location: Emmett, id
Posts: 331
|
Re: Spotted!
i went to get some .40 s&w and .22 lr today and everywhere was sold out. i am amazed at the prices when i do find some. i decided to reload 5k rounds of .40. i carry it on the ranch and shot a coyote last week that was eating a calf alive, so i need it. this is a scary world we are living in. but these truck are something nice to focus on for awhile
 that a sweet truck man.
|
|
|
|
|
02-17-2013, 10:01 PM
|
#17 |
|
Registered User
Join Date: Feb 2012
Location: Mission Viejo, CA
Posts: 1,856
|
Re: Spotted!
you seen the prices on mags? $15 magpul 30rd are going for $80 all day on ebay.
|
|
|
|
|
02-18-2013, 12:18 AM
|
#18 |
|
Registered User
Join Date: Oct 2010
Location: ruston la
Posts: 169
|
Re: Spotted!
I really feel for yall havent had any problems buying ammo in louisiana can walk in to wal mart and buy 357 and 380 all day long.
|
|
|
|
|
02-18-2013, 04:21 AM
|
#19 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Spotted!
The truck looks very nice from the road but I would like to see it up close if possible and just meet the guy. See what he has to say and see if he would join here also. If he built the truck himself are if he bought it like it is. There is a 67 LWB sitting out behind the trailer at a shop building I also would like to see.
I hope to buy some more ammo Tuesday. I just got my .40 Taurus and the wife a .380 Taurus so I need to stock up on it. I love the guns. Here is a thread I have in general on the guns. http://67-72chevytrucks.com/vboard/s...d.php?t=565219
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
02-18-2013, 05:12 AM
|
#20 |
|
Registered User
Join Date: Aug 2012
Location: Baltimore, MD
Posts: 71
|
Re: Spotted!
I love this review I really love it
|
|
|
|
|
02-18-2013, 10:03 AM
|
#21 |
|
Registered User
Join Date: Nov 2011
Location: Lyman, SC
Posts: 734
|
Re: Spotted!
I believe this may be the ad for it:
http://greenville.craigslist.org/cto/3624019167.html Not mine of course. - Matt
__________________
Matt Criswell - Lyman, SC 1972 Chevy Cheyenne SWB - Build: Porterbuilt State 1 Front & Rear, Bolt in Notch, McGaughys 2.5 Drop Spindles, Boyd Welding Fuel Tank UPSTATE SC GM TRUCK CLUB: FACEBOOK WEBSITE |
|
|
|
|
02-18-2013, 12:30 PM
|
#22 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Spotted!
Quote:
I must have been wrong about the tool box door. I don't see one in the pictures. I thought it had one. Sorry 72 K20. I would have sorn it had it. Oh well. Nice truck though.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
