Trunnion question for a fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66GTO66C10 · 08-16-2010, 11:13 AM

Does anyone know if poly trunnions are avaliable for a 66 long fleetside. I have seen them for the stepside but not the fleetside. I really hate the metal on metal sound of the factory ones. Secondly, what is the difference between the fleetside and stepside trunnions? I have not seen the hinge setup on a stepside to know the difference. I wonder if the stepside trunnions could be used on the fleetside.

jonzcustomshop · 08-16-2010, 12:32 PM

there is a fleet one sitting on this dash...
looks almost the same as a step one I pulled. the step ones have a hole drilled in them , so they don't spin when you take the bolt out, the step one is bolted to the bed with the same size bolt as the fleet is bolted to this bracket...
I will try later today putting this fleet one in a step gate , and see if they fit together....

shrunken66stroker · 08-17-2010, 12:25 AM

I hope to get the answer or a fix to the horrible groan problem of the stock ones.

1966chevy · 09-17-2014, 04:31 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

1966chevy · 09-25-2014, 11:37 AM

Edited by forum staff

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

1966chevy · 09-25-2014, 03:59 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Clyde65** · 09-26-2014, 09:03 AM

1966Chevy, where do you get these trunions?

1966chevy · 09-26-2014, 10:24 AM

PM Sales are SPECIFICALLY not allowed on this site. You have been warned multiple times to stop trying to sell your items on this site, whether directly or via your Ebay link. Become a supporting vendor and you can sell as many of these as you can make. I know the market is there for them. Just in case you don't seem to be reading this, this reply does apply to any selling, anywhere on the site, not just the Classified area.

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Chevy Fleetside** · 09-26-2014, 01:41 PM

Quote:

Originally Posted by shrunken66stroker

I hope to get the answer or a fix to the horrible groan problem of the stock ones.

Did you try putting a little grease on them before you installed the tail gate?

1966chevy · 09-26-2014, 02:27 PM

Quote:

Originally Posted by Chevy Fleetside

Did you try putting a little grease on them before you installed the tail gate?

Yes, but with these there is not more noise or grease on them and No more dripping rust.

Slow Build · 09-26-2014, 02:42 PM

It looks like you may have a good product and we (the people on this forum) are the right guys to get the word out about it if it works. But that isn't going to happen if you get removed from the forum for ignoring the rules and the admin. Just become a forum supporting member and do it right. You put a lot of work into this, don't screw it up now.

1966chevy · 11-11-2014, 06:42 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

chevy_mike · 11-11-2014, 10:06 PM

1966chevy, awesome you became a high octane member. These look to be great items that have been needed for quite a while. Glad you will be able to fill the void.

Slow Build · 11-11-2014, 10:28 PM

Congrats on stepping up. Well played.

As said, it looks like a good product. It's on my list. I think Santa may be getting me a set for Xmas.

Good luck in your endeavor.

1966chevy · 02-04-2015, 07:17 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

1966chevy · 10-01-2015, 01:19 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

1966chevy · 11-12-2015, 06:55 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

08-16-2010, 11:13 AM	#1
66GTO66C10 Registered User Join Date: Jul 2010 Location: Rio Rancho, NM Posts: 79	Trunnion question for a fleetside Does anyone know if poly trunnions are avaliable for a 66 long fleetside. I have seen them for the stepside but not the fleetside. I really hate the metal on metal sound of the factory ones. Secondly, what is the difference between the fleetside and stepside trunnions? I have not seen the hinge setup on a stepside to know the difference. I wonder if the stepside trunnions could be used on the fleetside. __________________ ---------------------------------------------- 1966 Chevy C10 frame off resto (In progress) 1966 GTO Numbers matching original 1989 Toyota Pickup (Tonka) resto 2002 HD FLSTC 2000 HD FLSTC 1996 Ninja ZX11 Believe nothing of what you hear, and 1/2 of what you see!

08-16-2010, 12:32 PM	#2
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Trunnion question for a fleetside there is a fleet one sitting on this dash... looks almost the same as a step one I pulled. the step ones have a hole drilled in them , so they don't spin when you take the bolt out, the step one is bolted to the bed with the same size bolt as the fleet is bolted to this bracket... I will try later today putting this fleet one in a step gate , and see if they fit together.... Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

08-17-2010, 12:25 AM	#3
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Trunnion question for a fleetside I hope to get the answer or a fix to the horrible groan problem of the stock ones. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

09-17-2014, 04:31 PM	#4
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by chevy_mike; 09-24-2014 at 09:38 PM.

09-25-2014, 11:37 AM	#5
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Edited by forum staff Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by Liz; 09-25-2014 at 12:23 PM. Reason: edited

09-25-2014, 03:59 PM	#6
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by chevy_mike; 09-26-2014 at 10:48 AM.

09-26-2014, 09:03 AM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: Trunnion question for a fleetside 1966Chevy, where do you get these trunions? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-26-2014, 10:24 AM	#8
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside PM Sales are SPECIFICALLY not allowed on this site. You have been warned multiple times to stop trying to sell your items on this site, whether directly or via your Ebay link. Become a supporting vendor and you can sell as many of these as you can make. I know the market is there for them. Just in case you don't seem to be reading this, this reply does apply to any selling, anywhere on the site, not just the Classified area. Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by chevy_mike; 09-26-2014 at 10:47 AM.

09-26-2014, 02:42 PM	#11
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Trunnion question for a fleetside It looks like you may have a good product and we (the people on this forum) are the right guys to get the word out about it if it works. But that isn't going to happen if you get removed from the forum for ignoring the rules and the admin. Just become a forum supporting member and do it right. You put a lot of work into this, don't screw it up now. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil. Last edited by Slow Build; 09-27-2014 at 01:13 AM.

11-11-2014, 06:42 PM	#12
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 11-12-2015 at 09:41 PM. Reason: Text addition

11-11-2014, 10:06 PM	#13
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Trunnion question for a fleetside 1966chevy, awesome you became a high octane member. These look to be great items that have been needed for quite a while. Glad you will be able to fill the void. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

11-11-2014, 10:28 PM	#14
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Trunnion question for a fleetside Congrats on stepping up. Well played. As said, it looks like a good product. It's on my list. I think Santa may be getting me a set for Xmas. Good luck in your endeavor. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

02-04-2015, 07:17 PM	#15
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 11-12-2015 at 09:42 PM.

10-01-2015, 01:19 PM	#16
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 11-12-2015 at 09:42 PM.

11-12-2015, 06:55 PM	#17
1966chevy Registered User Join Date: Oct 2011 Location: San Jose, Ca Posts: 459	Re: Trunnion question for a fleetside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 11-12-2015 at 09:43 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.