The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-14-2019, 06:16 PM   #1
C10_crazy
Registered User
 
C10_crazy's Avatar
 
Join Date: Apr 2018
Location: Casa Grande, AZ
Posts: 25
Longhorn trucks - what were the options

I recently read that the Longhorn trucks were available in either 3/4 ton or 1 ton versions. What are the differences between the two options from a chassis and suspension perspective? Are they both 8 lug? What is the differences between the 3/4 ton and 1 ton rear suspensions and differentials?

I'm curious because I recently bought a 1967 C30 dually truck so that made me curious about what variations were available. The Longhorns weren't built as a dually (as far as I know anyway). I've seen some Longhorns and I'm just wanting to learn as much as I can about what Chevrolet offered from 1967 to 1972 (I don't think the Longhorns were available until 1968).

Thanks for your help.
C10_crazy is offline   Reply With Quote
Old 07-14-2019, 06:52 PM   #2
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,922
Re: Longhorn trucks - what were the options

You are correct, Longhorns started in 68 and there were no drw's. They were available as 8 lug C20 and C30 only (no Ks and no 10s) and had the 133" wheelbase rather than 127" - and, of course, were 6" longer in wheelbase and be length. Generally speaking, the 20 had an HO52 rear whereas the 30 had an HO72. Some may have come with D60 (20s or 30s) - but I'm not certain about that (*See update in post 6). Chevs were called Longhorns, GMCs were just "a truck with 133" wheelbase" - i.e. they didn't get the bedside "Longhorn" script even though identical to the 133" Chevs. Trim options were totally independent of Longhorn status, you could have a base or a CST or Cheyenne Super, didn't matter.

Last edited by jocko; 07-14-2019 at 10:40 PM.
jocko is online now   Reply With Quote
Old 07-14-2019, 07:59 PM   #3
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
Re: Longhorn trucks - what were the options

My 70 GMC Longhorn with small block and 4 speed had a Dana 60 in it. There is a 69 Chevy Longhorn for sale here locally with a big block and 4 speed and it has 3.54 geared Dana 60 in it. Obviously both C20's. The HO52 is 5200# GVWR and the Dana 60 is 5500# GVWR and the HO71 is 7200# GVWR. So GVWR of the truck would dictate which axle was installed as well.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Old 07-14-2019, 08:40 PM   #4
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,019
Re: Longhorn trucks - what were the options

From what I've read around here, and I may have part of it wrong, the Longhorn doesn't necessarily have the D60. I think that that comes with the Custom Camper equipment, which also gives a 1T frame, even on the 3/4T. Here is the SPID from my truck for reference. It isn't just a Longhorn (though it it never got the "Longhorn" scripts, for some reason, probably alcohol-related), it's also a Custom Camper, so maybe that muddies the water a little as far as the rear axle goes.
Attached Images
 
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 07-14-2019, 10:18 PM   #5
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,355
Re: Longhorn trucks - what were the options

I've come across 3 longhorns over the years everyone had a dana 60 in it. The 68 I kept cuz' it had a 396 big block. Dana 60 came with 3.54 gearing and a powerloc. Also had PS, PB, AC, dual batt. and buddy buckets. I installed a tilt, tach. Converted the rear diff to a 14 bolt dually and 3.42 gearing, front end got disc
kwmech is offline   Reply With Quote
Old 07-14-2019, 10:26 PM   #6
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,270
Re: Longhorn trucks - what were the options

-
If your C30 is a 133" wheelbase model a longhorn bed will fit on it. All you have to do is add the front bed mount brackets on the frame and widen the wheel tubs for the dual wheels.

Here are a couple of threads member "72freak" posted when he built his.

http://67-72chevytrucks.com/vboard/s...d.php?t=260748

http://67-72chevytrucks.com/vboard/s...d.php?t=307114

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 07-14-2019, 10:39 PM   #7
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,922
Re: Longhorn trucks - what were the options

I believe having a D60 was dependent on having a big block or leaf springs. Big block required the 3.54 ratio D60. Since Longhorn came standard with leafs, I'd expect most, if not all, had D60s. Anyone had one that WASN'T a D60?
jocko is online now   Reply With Quote
Old 07-14-2019, 10:45 PM   #8
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,922
Re: Longhorn trucks - what were the options

here's the 68 info for reference:
Attached Images
    
jocko is online now   Reply With Quote
Old 07-15-2019, 12:19 AM   #9
ElKotze
Registered User
 
ElKotze's Avatar
 
Join Date: Nov 2014
Location: Southwest Kansas
Posts: 306
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by jocko View Post
Anyone had one that WASN'T a D60?
My '69 Longhorn C20 came factory with a HO72. It is a Custom Camper with the 1-ton frame, rear leafs, 350 engine and 4-speed. I wished it had a DANA (more parts, better gears), so I swapped in a 14-bolt semi-floater with 3.54 gears.
Attached Images
  
__________________
'64 C10 LWB, 283, 5speed
'68 C20 LWB, 327, 4speed
'69 C20 Custom Camper Longhorn, 350, 4speed
'72 C20 Cheyenne Super, 396, TH400
'66 C60, 292, 4speed
ElKotze is offline   Reply With Quote
Old 07-15-2019, 06:46 AM   #10
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Longhorn trucks - what were the options

They all had leaf springs because they were all on the 1t frame. The Dana60 in a 3/4t (only) would be due to big block/TH400. That is the only ratio that combination was offered with. The truck the Dana60 3.54/posi I posted about last week came out of was a dual rear wheel option cab & chassis 3/4t with 396/TH400... and factory stake body. It was the pickup width rear with dual wheels all around (1/2" studs), all factory. I have seen BBC/4spd trucks get the Dana60 3.54 as well. These are exceptions, but were possible.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 07-22-2019 at 08:05 AM.
special-K is offline   Reply With Quote
Old 07-15-2019, 10:50 AM   #11
dozerbill72
Senior Member
 
dozerbill72's Avatar
 
Join Date: Oct 2015
Location: Berryville Arkansas
Posts: 402
Re: Longhorn trucks - what were the options

It has to do with leafs vs. coils. Leaf spring 3/4t got the D60 no matter what engine combo, just different gearing. I have a 71 C20 with a 350/350 turbo with a D60 and 4.10 gears.
dozerbill72 is offline   Reply With Quote
Old 07-15-2019, 02:23 PM   #12
muley
Registered User
 
muley's Avatar
 
Join Date: Aug 2013
Location: Homedale, Idaho
Posts: 160
Re: Longhorn trucks - what were the options

My 69 was a C20, 350/SM465 4 speed with leafs and HO52 with 4.10 gears.
( I've since sold the pickup to another enthusiastic young lad.)
__________________
Grandpa 1953 M38A1 Jeep
1989 GMC K2500
1958 Alaskan Camper all original
WORK : A necessary evil that finances
what I really like to do.
muley is offline   Reply With Quote
Old 07-17-2019, 08:00 AM   #13
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by dozerbill72 View Post
It has to do with leafs vs. coils. Leaf spring 3/4t got the D60 no matter what engine combo, just different gearing. I have a 71 C20 with a 350/350 turbo with a D60 and 4.10 gears.
Quote:
Originally Posted by muley View Post
My 69 was a C20, 350/SM465 4 speed with leafs and HO52 with 4.10 gears.
( I've since sold the pickup to another enthusiastic young lad.)
Yeah, most C/20s were leaf spring, the exception is coil springs on those. It could be that the Dana60 came with the automatic transmission, just a hunch. I know the Custom Camper/20s with 4.10/leaf/350/TH350 got a Dana60. They were rated at slightly more payload than the HO52 (for some reason), so might have to do with that on Custom Campers. But I wouldn't be surprised if there were HO52 leaf spring Custom Campers, too. But maybe only manual trans?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 07-17-2019, 09:31 AM   #14
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Longhorn trucks - what were the options

My '70 Longhorn has the D60 and leaf springs with the Custom Camper option (1T frame). I welded up my bed seams to hide 'em though.
Attached Images
 
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Old 07-17-2019, 11:39 AM   #15
Killer Bee
Registered User
 
Killer Bee's Avatar
 
Join Date: Jan 2016
Location: Barber City, CA
Posts: 4,717
Re: Longhorn trucks - what were the options

both of my 71 C20 CE21034 Longhorns have leaf spring HO52 axles..

both small block 350, one manual trans, one auto..

both 'Custom Camper C20' badged / Z81 Camper Specials..

ochre is Z84 Custom Sport Truck, red is base model with customer ordered moldings..

both farm finds, unmodified / unmolested original equipment..

see SPIDs for other options, hope that helps







__________________
I started out with nothing - and I still have most of it
Killer Bee is offline   Reply With Quote
Old 07-17-2019, 07:16 PM   #16
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by jocko View Post
here's the 68 info for reference:
On the very first paragraph it says the standard axle for a Longhorn (which we all know is ONLY leaf spring!) is teh 5200 GVWR 4.57 geared axle. The 5200 GVWR is an HO52.

And as I mentioned before, my small block 4 speed GMC "Longhorn" was equipped with a Dana 60.

You don't know what you don't know is what I am getting at, but it's interesting discussion.

EDIT: And Killer Bee's trucks prove that out!
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Old 07-17-2019, 07:27 PM   #17
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,019
Re: Longhorn trucks - what were the options

Looking at Killer Bee's two SPIDs, I see that the one without Camper Wiring has a 61A alternator listed. Did the Camper Wiring make that happen, so that it doesn't show up on the SPID? Mine has Camper Wiring and a 61A alternator.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA

Last edited by Steeveedee; 07-17-2019 at 07:33 PM.
Steeveedee is offline   Reply With Quote
Old 07-20-2019, 09:27 PM   #18
C10_crazy
Registered User
 
C10_crazy's Avatar
 
Join Date: Apr 2018
Location: Casa Grande, AZ
Posts: 25
Re: Longhorn trucks - what were the options

I'm sorry that it's taken me so long to get back on here and read all the posts... I really appreciate all of your responses to this thread. I bought this '67 1 ton not really knowing anything about the extent of what the General offered in 1 ton trucks.

I had a 1 ton single rear wheel stepside truck once (it was a City of Phoenix work truck) and everytime I mentioned to a friend of mine that it was a 133 in wheelbase truck, he said it was a Longhorn. Well, I didn't think he was right, but truthfully, he knows a lot more about cars and trucks than I probably ever will. Anyway, when I bought this truck I became more curious about the Longhorns (which I originally thought were all 1 tons) and the dually 1 tons.

Thanks again for all the truck information.
C10_crazy is offline   Reply With Quote
Old 07-20-2019, 09:54 PM   #19
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,922
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by C10_crazy View Post
I'm sorry that it's taken me so long to get back on here and read all the posts... I really appreciate all of your responses to this thread. I bought this '67 1 ton not really knowing anything about the extent of what the General offered in 1 ton trucks.

I had a 1 ton single rear wheel stepside truck once (it was a City of Phoenix work truck) and everytime I mentioned to a friend of mine that it was a 133 in wheelbase truck, he said it was a Longhorn. Well, I didn't think he was right, but truthfully, he knows a lot more about cars and trucks than I probably ever will. Anyway, when I bought this truck I became more curious about the Longhorns (which I originally thought were all 1 tons) and the dually 1 tons.

Thanks again for all the truck information.
You were right - the 133 stepside is indeed a 1 ton, but not a Longhorn (a fleetside thing).
jocko is online now   Reply With Quote
Old 07-21-2019, 11:17 AM   #20
blue 72 gmc 4x4
Registered User
 
blue 72 gmc 4x4's Avatar
 
Join Date: Jul 2009
Location: Aladdin Wy
Posts: 794
Re: Longhorn trucks - what were the options

Mine has an HO52 with a "no spin" diff.
Attached Images
  
__________________
1955 GMC Hydramatic
1959 Chevy Spartan 100
1969 Chevy C/10
1969 Chevy C/30 Bruiser
1972 GMC (Wrecked)
1972 GMC pickup..old blue

Restored Vent Windows
https://67-72chevytrucks.com/vboard/...d.php?t=766598

1955 GMC hydramatic build
http://67-72chevytrucks.com/vboard/s...d.php?t=429417

blue 72 gmc 4x4 is offline   Reply With Quote
Old 07-21-2019, 11:20 AM   #21
blue 72 gmc 4x4
Registered User
 
blue 72 gmc 4x4's Avatar
 
Join Date: Jul 2009
Location: Aladdin Wy
Posts: 794
Re: Longhorn trucks - what were the options

Forgot a pic of the SPID.
Attached Images
 
__________________
1955 GMC Hydramatic
1959 Chevy Spartan 100
1969 Chevy C/10
1969 Chevy C/30 Bruiser
1972 GMC (Wrecked)
1972 GMC pickup..old blue

Restored Vent Windows
https://67-72chevytrucks.com/vboard/...d.php?t=766598

1955 GMC hydramatic build
http://67-72chevytrucks.com/vboard/s...d.php?t=429417

blue 72 gmc 4x4 is offline   Reply With Quote
Old 07-22-2019, 08:25 AM   #22
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,749
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by davepl View Post
My '70 Longhorn has the D60 and leaf springs with the Custom Camper option (1T frame). I welded up my bed seams to hide 'em though.
Is yours a C2500 or C3500?
Quote:
Originally Posted by C10_crazy View Post
I'm sorry that it's taken me so long to get back on here and read all the posts... I really appreciate all of your responses to this thread. I bought this '67 1 ton not really knowing anything about the extent of what the General offered in 1 ton trucks.

I had a 1 ton single rear wheel stepside truck once (it was a City of Phoenix work truck) and everytime I mentioned to a friend of mine that it was a 133 in wheelbase truck, he said it was a Longhorn. Well, I didn't think he was right, but truthfully, he knows a lot more about cars and trucks than I probably ever will. Anyway, when I bought this truck I became more curious about the Longhorns (which I originally thought were all 1 tons) and the dually 1 tons.

Thanks again for all the truck information.
Here's the deal. That '67 was a C30 "pickup", or "Stepside Pickup". A GMC would be a C3500 Fenderside. Up through '67, that was the only 1t pickup available.

This was the short 1t chassis at 133", just 6" longer than the 127" long beds. The cab & chassis wheelbase you saw tow trucks, 8' dump bodies, 10' stake beads, and 9" utility bodies on. The long 1t chassis was 157".

In '68 GM started offering wide bed pickups on the short 1t single rear chassis in 3/4t or 1t. The long bedside got an extension and wood floor with extension pieces, but their own 1pc steel strips. Chevy named theirs the "Longhorn"
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 07-23-2019, 08:42 AM   #23
WIDESIDE72
Senior Member
 
WIDESIDE72's Avatar
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,494
Re: Longhorn trucks - what were the options

Quote:
Originally Posted by jocko View Post
I believe having a D60 was dependent on having a big block or leaf springs. Big block required the 3.54 ratio D60. Since Longhorn came standard with leafs, I'd expect most, if not all, had D60s. Anyone had one that WASN'T a D60?
I have a 70 Longhorn with a 396/ 400 BBC TH400 and Dana 60 rear.
WIDESIDE72 is offline   Reply With Quote
Old 07-23-2019, 09:10 AM   #24
WIDESIDE72
Senior Member
 
WIDESIDE72's Avatar
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,494
Re: Longhorn trucks - what were the options

unable to upload photos...

Last edited by WIDESIDE72; 07-23-2019 at 10:28 AM.
WIDESIDE72 is offline   Reply With Quote
Old 02-25-2020, 10:29 PM   #25
Stagerunner
Registered User
 
Join Date: Feb 2015
Location: St. Louis, mo
Posts: 66
Re: Longhorn trucks - what were the options

I have a 71 c30 longhorn 400BB Turbo 400 and an HO72 rear end
Stagerunner is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com