Squares with Slotted Mags - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 04-06-2011, 08:16 AM

Quote:

Originally Posted by kelsfine69

Yea Good Luck. I have been told there is no stock left and they have been discontinued...

//

You can now get them from Coker Tire.

Squareforceone · 04-06-2011, 08:30 AM

one i had saved

jchav62 · 04-06-2011, 09:29 AM

Quote:

Originally Posted by Squareforceone

one i had saved

Very cool pic... Nice truck! That's close to the original green of my truck...

jchav62 · 04-06-2011, 09:30 AM

Quote:

Originally Posted by Jonboy

You can now get them from Coker Tire.

I'll be checking into that! Thanks for the info!

Jonboy · 04-06-2011, 09:34 AM

No problem, Joe. Sit down, though. They aren't cheap.

jchav62 · 04-06-2011, 09:41 AM

Quote:

Originally Posted by Jonboy

No problem, Joe. Sit down, though. They aren't cheap.

Figures...

jchav62 · 04-06-2011, 09:42 AM

Here's a couple teaser pics of my mags. I finished polishing the last one last night. Here's a before and after...

vern350 · 04-06-2011, 08:00 PM

I also got a set of 8 lug 16.5 slots for project. Also have a set of matching 15x10s for the brown truck. I like them.

kelsfine69 · 04-06-2011, 08:11 PM

Quote:

Originally Posted by Jonboy

You can now get them from Coker Tire.

Id rather buy them from BFG cause shippings a killer for Canadians..

jchav62 · 04-07-2011, 09:22 AM

I looked em up at Coker yesterday. They run $150 a piece, plus about $50 to ship so I'm looking at paying $350 if I go through them. Seems to be around the going rate for that size.

69C20CUSTOM · 04-07-2011, 10:00 AM

Quote:

Originally Posted by bigd65

I want some in 8 LUG

me to i would love to get my hands on some

Jonboy · 04-07-2011, 10:05 AM

Quote:

Originally Posted by jchav62

I looked em up at Coker yesterday. They run $150 a piece, plus about $50 to ship so I'm looking at paying $350 if I go through them. Seems to be around the going rate for that size.

That's better than I thought they would be. Tire Rack is $145 each. Remember when Radial T/A's were $50 each?

jchav62 · 04-07-2011, 03:05 PM

Quote:

Originally Posted by Jonboy

That's better than I thought they would be. Tire Rack is $145 each. Remember when Radial T/A's were $50 each?

A buddy of mine just hooked me up with a big ol' stack of Hot Rod and Popular Hot Rodding Magazines from the 60's, 70's and 80's. The prices in those ads in them almost make me cry! $25 tires, Cragars wheels $40 a piece, $30 camshafts, new Holley carbs for $50, 4 speeds for $150 "outrite", engines for $200.

The styles of the vehicles are pretty bada$$ too. Got me on a 70's kick for my truck...these slots came just in time!

On another note: two ads that are close to eachother in one issue show Cragar brand intake manifolds and engine parts, a couple pages over there's an ad for Holley wheels AND tires. Pretty dam cool...

burb1085 · 04-07-2011, 03:26 PM

Name: PA100386.jpg
Views: 809
Size: 50.6 KB

tater502 · 04-08-2011, 12:01 AM

jchav62 · 04-12-2011, 09:24 AM

I decided to paint the black in the slots green, the color that the truck is eventually going to be. Right now the roof and interior are green...

jchav62 · 04-12-2011, 09:25 AM

Got my lugnuts, and since I'm running them 'capless' I got some chrome hub dust covers. The hub will also be green... Just got to wait until next payday to wait for the swap.

Jonboy · 04-12-2011, 10:39 AM

Where did you find the lugs at?

jchav62 · 04-12-2011, 11:14 AM

Quote:

Originally Posted by Jonboy

Where did you find the lugs at?

Pep Boys.

Jonboy · 04-12-2011, 12:02 PM

Bah. I am not sure where there are any Pep Boys around here anymore. Everywhere I look, you can only find then 4 at a time.

jchav62 · 04-12-2011, 12:36 PM

Quote:

Originally Posted by Jonboy

Bah. I am not sure where there are any Pep Boys around here anymore. Everywhere I look, you can only find then 4 at a time.

If you need me to help you out, let me know... There were a few packs left.

**cwcarpenter98** · 08-17-2022, 09:57 PM

Bringing this thread back up with another square that got some slots

Ziegelsteinfaust · 08-17-2022, 10:26 PM

On my truck with 15x10 slot mags i have access too would of stuck out of the bed sides by a inch roughly.

So if I get my 86 it may get those rims too

65chevysub · 08-22-2022, 01:11 AM

Quote:

Originally Posted by 87 V20 Scottsdale

Slots are the best looking rims around!

I like those. I was wondering if they came in an 8 lug 16" version.

**GOPAPA** · 08-22-2022, 03:46 PM

Quote:

Originally Posted by jchav62

Post 'em up!

Just wanted to see some other squares with slots...

This my brand new 73 after I put the slots on it ,, photos were not as good back then ,,but still better than nothing

Name: 1 (2).jpg
Views: 167
Size: 75.8 KB

04-06-2011, 08:30 AM	#27
Squareforceone Registered User Join Date: Nov 2010 Location: Rustville USA or southeast Ia Posts: 654	Re: Squares with Slotted Mags one i had saved Attached Images

04-06-2011, 09:34 AM	#30
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Squares with Slotted Mags No problem, Joe. Sit down, though. They aren't cheap. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-06-2011, 09:42 AM	#32
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Squares with Slotted Mags Here's a couple teaser pics of my mags. I finished polishing the last one last night. Here's a before and after... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-06-2011, 08:00 PM	#33
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: Squares with Slotted Mags I also got a set of 8 lug 16.5 slots for project. Also have a set of matching 15x10s for the brown truck. I like them. Attached Images

04-07-2011, 09:22 AM	#35
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Squares with Slotted Mags I looked em up at Coker yesterday. They run $150 a piece, plus about $50 to ship so I'm looking at paying $350 if I go through them. Seems to be around the going rate for that size. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-07-2011, 03:26 PM	#39
burb1085 Registered User Join Date: Mar 2011 Location: Lancaster,Oh. Posts: 138	Re: Squares with Slotted Mags

04-08-2011, 12:01 AM	#40
tater502 Registered User Join Date: Sep 2010 Location: Rio, Il Posts: 38	Re: Squares with Slotted Mags

04-12-2011, 09:24 AM	#41
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Squares with Slotted Mags I decided to paint the black in the slots green, the color that the truck is eventually going to be. Right now the roof and interior are green... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-12-2011, 09:25 AM	#42
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Squares with Slotted Mags Got my lugnuts, and since I'm running them 'capless' I got some chrome hub dust covers. The hub will also be green... Just got to wait until next payday to wait for the swap. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-12-2011, 10:39 AM	#43
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Squares with Slotted Mags Where did you find the lugs at? __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-12-2011, 12:02 PM	#45
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Squares with Slotted Mags Bah. I am not sure where there are any Pep Boys around here anymore. Everywhere I look, you can only find then 4 at a time. __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-17-2022, 09:57 PM	#47
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,426	Re: Squares with Slotted Mags Bringing this thread back up with another square that got some slots Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

08-17-2022, 10:26 PM	#48
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,562	Re: Squares with Slotted Mags On my truck with 15x10 slot mags i have access too would of stuck out of the bed sides by a inch roughly. So if I get my 86 it may get those rims too



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.