The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-24-2024, 10:09 PM   #1
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,840
Auto transmission steering column

I would like an auto transmission steering column for my 1963 C10, to replace my 3 on the column one. I would prefer an original GM one from a pickup truck and not really interested in aftermarket ones. I plan to put an LS engine and 4L60 transmission in it.

Do you folks have any advice on what to look for in a used steering column? Any years to avoid or can I shop anywhere from 1960 to 1972? I am mostly interested in non-tilt with neutral safety switch and backup lights switch, and stock(ish) appearance. I have manual steering, not sure yet if I'm going to power steering. I don't know what year turn signals became standard, but my 63 appears to have turn signal on the existing steering column, so I would like to get a steering column with turn signal lever.

I believe I am not interested in shifting into all the available lower gears of the auto transmission, I'm just going to use Park, R, N, D, extremely rare that I would use L as the 3rd gear and would not be using 2 and 1. If you folks think this is a huge mistake to just not worry about shifting into all gears and I must have an aftermarket column or some way to shift to lower gears, please let me know.

Last edited by dmjlambert; 07-24-2024 at 10:30 PM.
dmjlambert is offline   Reply With Quote
Old 07-25-2024, 12:36 AM   #2
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,259
Re: Auto transmission steering column

I am using a 1968 C10 column in my '61. I had to adapt the column to fit the '61 mount, but it was easy.

Use the neutral safety switch and backup light switch in the 4L60E - it's way more reliable.

I fabricated my own shifter arm that worked out like this:

P = P
R = R
N = N
D = 4
2 = 3
1 = 2
? = 1

When I go to manual first, it's off the indicator. I have the detents in the column matching the detents in the transmission. 1st works, just not visible. _I_ know it's there, but I'm usually in OD or D.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 07-25-2024, 09:21 AM   #3
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,840
Re: Auto transmission steering column

What parts did you have to fabricate?
dmjlambert is offline   Reply With Quote
Old 07-25-2024, 01:06 PM   #4
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,259
Re: Auto transmission steering column

I welded a plate with four threaded holes inside the column tube that secures the column to the mount. I think the 60, and 61-62 columns are a bit unique.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 07-25-2024, 06:11 PM   #5
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,840
Re: Auto transmission steering column

OK that is regarding mounting the column, but what did you do when you "fabricated my own shifter arm that worked out like this", was the shifter arm as already on the 68 column not going to just work without more fabrication?
dmjlambert is offline   Reply With Quote
Old 07-25-2024, 07:54 PM   #6
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,259
Re: Auto transmission steering column

The arm attched to the 4L80E that I used. It just took a bit of playing around until I had the holes all in the right place for things to work out.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 07-25-2024, 08:11 PM   #7
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,840
Re: Auto transmission steering column

Oh, I see what you mean, thanks. At first I was picturing the chrome shift lever behind the steering wheel or the mechanisms inside the steering column right there needing some work.
dmjlambert is offline   Reply With Quote
Reply

Bookmarks

Tags
auto transmission, steering column

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com