The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-11-2024, 05:02 PM   #1
cjs226
Registered User
 
cjs226's Avatar
 
Join Date: Nov 2022
Location: Austin Texas
Posts: 1
Advice wanted for next steps on steering on a '62

A previous owner did a good job of adding power steering to my '62, but the gearbox is leaking (from the top, not the lines). Everything is loose, but it feels like I'm going to have to either cut the shaft (it's junction is welded together) or remove the column to get it out.

Am I wrong, can I further disconnect the rag joint so I can feel more comfortable separating the gearbox from the pitman arm?

At this point, should I just cut the shaft and replace the column with a tilt steering column (which was already on my (ever growing) list)?

Lastly, the steering worked great, but felt off/too quick(?) - possibly due to the larger steering wheel. If I replace the column, I'd likely use a smaller steering wheel. Would anything else be needed to righten the steering (speed)? Different gearing?
Attached Images
   
cjs226 is offline   Reply With Quote
Old 08-12-2024, 07:16 AM   #2
bhap
Senior Member
 
bhap's Avatar
 
Join Date: Mar 2006
Location: Pittsburgh, PA
Posts: 264
Re: Advice wanted for next steps on steering on a '62

You may have a quicker than stock ratio steering gear. If not a complete new column., you could add a collapsing/telescoping shaft and a center articulating union. If you put a wrench around the shaft below the joint, maybe you can hammer the tag joint off - it looks like the bolt is out. Take steering wheel off first along with turn signal mechanism. I used a Borgeson shaft and universal joints, but there are lots of options if you search the forum. Good luck!
bhap is offline   Reply With Quote
Reply

Bookmarks

Tags
1962, steering, steering box, steering column

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com