The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-17-2011, 06:27 PM   #1
Markedz
Registered User
 
Join Date: Oct 2011
Location: Scottsdale
Posts: 28
Driver's door adjustment

Hi all, I have been combing all of the older posts looking for what adjustment needs to be made to the driver's door on a 1970 Chevy C20 so that it will lock without having to push on the door. Does anyone have any experience with what needs to be done? I have had that strike in more positions than a yoga instructor and with no results. All of the previous posts have no definitive solutions. Any help would be appreciated, thanks.
Markedz is offline   Reply With Quote
Old 10-17-2011, 09:09 PM   #2
Jarwood
Registered User
 
Jarwood's Avatar
 
Join Date: Oct 2011
Location: Jefferson, Georgia
Posts: 248
Re: Driver's door adjustment

If I remember correct there are brass bushings on the front side of the door hinge. Replacing those will help keep the door more stable and line up better with the striker bolt.

Good Luck,
James
Jarwood is offline   Reply With Quote
Old 10-17-2011, 11:55 PM   #3
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: Driver's door adjustment

I have to slam mine a little harder than I should, and the passenger side is perfect. Very annoying.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD
Click here to support the board
Philippians 4: 6-7
dan42 is offline   Reply With Quote
Old 10-18-2011, 12:05 AM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,727
Re: Driver's door adjustment

I too adjusted, tweaked and adjusted more. Then I just broke down and bought a new latch assembly from LMC.
Problem is the star wheel centre pin gets worn out. Star wheel twists out of line when you close the door. Pushing door in recentres it so the lock works. Occasionally!!!
Sometimes you just gotta buy new ones.
geezer#99 is offline   Reply With Quote
Old 10-18-2011, 06:56 AM   #5
bobs409
1969 Custom 30 wrecker
 
bobs409's Avatar
 
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
Re: Driver's door adjustment

Ack! I know what you mean about this. The driver door on both my pickups do the same thing.
__________________
Bob

63 Impala 283/PG/3.36 (under restoration)
66 Impala 327/PG/3.36
66 Chevelle SS 409/M22/3.55
69 Chevelle 307/PG/3.08 (future restoration)
69 C10 short stepside 454/TH350/3.73
69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!)
71 Cheyenne 20 fleetside 350/4 spd/4.10
71 Chevelle 6/PG/3.08
72 Chevelle 454/M21/4.10
bobs409 is offline   Reply With Quote
Old 10-18-2011, 08:16 AM   #6
longbed67
Registered User
 
longbed67's Avatar
 
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
Re: Driver's door adjustment

I got one, not to steal your thread but the top of the passenger door strikes the bottom of the rain gutter as it is closing, just enough to scrape paint, how does one adjust it down?
__________________
Adam

My 1967 C10 - Turbo 250 Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=485843

(608) 214-8706
longbed67 is offline   Reply With Quote
Old 10-18-2011, 08:17 AM   #7
Markedz
Registered User
 
Join Date: Oct 2011
Location: Scottsdale
Posts: 28
Re: Driver's door adjustment

It is not necessary to get new bushings for the hinges, mine are still perfect. Geezer has got the first logical answer I have seen regarding this. What I found after careful examination yesterday was that the star wheel just needs to rotate a fraction of an inch to allow the lock mechanism to engage it, without hitting it. The only solution that I can think of is what Geezer said... replacing the latching mechanism or filing the part of the lock assembly that engages the latch. There are so many of us with the same problem... Thanks for the help guys. Now I just need to figure out why the door doesn't shut all the way on the passenger side, It's like one thing after another!
Markedz is offline   Reply With Quote
Old 10-18-2011, 08:21 AM   #8
Markedz
Registered User
 
Join Date: Oct 2011
Location: Scottsdale
Posts: 28
Re: Driver's door adjustment

Longbed67, did you look at the hinges? Do you see any shims behind them, especially the bottom one? If the door is hitting the gutter that would mean that the bottom hinge has shims behind it between the door and the hinge or the bottom hinge is adjusted too far back. If it doesn't then it most likely require you to adjust the hinge forward where it bolts to the body.
Markedz is offline   Reply With Quote
Old 10-18-2011, 10:15 AM   #9
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,727
Re: Driver's door adjustment

I did try filling the mechanism but to no avail. Metal is all hardened. File wouldn't hardly scratch it.
But one good thing about my attempts to fix old worn out parts. After taking it apart 6 times I got real good at taking it out and putting it back in. LOL!!!
Sometimes you just gotta throw in the towel, flash the credit card and get new stuff.
geezer#99 is offline   Reply With Quote
Old 10-18-2011, 10:20 AM   #10
Markedz
Registered User
 
Join Date: Oct 2011
Location: Scottsdale
Posts: 28
Re: Driver's door adjustment

Thanks for the feedback. I guess Grumpy's truck parts is going to get another swipe of my card to the tune of $60.00! Any tips for the removal and re-installation?
Markedz is offline   Reply With Quote
Old 10-18-2011, 11:33 AM   #11
domeier
Registered User
 
domeier's Avatar
 
Join Date: Sep 2011
Location: San Jose, California
Posts: 784
Re: Driver's door adjustment

I'd like to get or make the special wrench Chevy shows in the manual for the front hinge attach. Anyone know where to buy one, or have a shade-tree solution?
domeier is offline   Reply With Quote
Old 10-18-2011, 11:36 AM   #12
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,727
Re: Driver's door adjustment

Knee Pads. Strong back. Small hands. No bi-focals. LOL!!!
Put a trouble light down inside the door. Have a small mirror handy. It's not a super place to see into. The rod from the inside door handle to the latch. REmove the clip on the handle end. You'll never get the other end off until the whole thing is out.
You gotta remove the clip for the door lock first then the screws on the latch. Don't forget to take the lock nob off.
The whole latch needs to be twisted around the window channel run too.
It's tricky but do-able.
geezer#99 is offline   Reply With Quote
Old 10-18-2011, 11:56 AM   #13
Markedz
Registered User
 
Join Date: Oct 2011
Location: Scottsdale
Posts: 28
Re: Driver's door adjustment

Quote:
Originally Posted by domeier View Post
I'd like to get or make the special wrench Chevy shows in the manual for the front hinge attach. Anyone know where to buy one, or have a shade-tree solution?
I have heard of guys just cutting one out of 1/8" steel and bending it to fit the contour of what you need. That is my "shade tree" contribution.
Markedz is offline   Reply With Quote
Reply

Bookmarks

Tags
door, driver's side, lock.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com