The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > 67-72

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-07-2022, 09:27 PM   #1
apence021
Registered User
 
Join Date: Jul 2022
Location: Chester California
Posts: 1
Having Starter issues

So I recently went to a 350 and a t5 but I reused the original 6cyl bellhousin so I can use the z bar and I went to use the 3 bolt starter that was working on the 6 and it grinds and freezes up the flywheel is 168 tooth and the starter is also to my best of knowledge. Did I **** up by using the old bellhousin? It bolted straight up so I didn't give it a second thought and nothing scraps or rubs I can spin motor by hand. Should I see if I can use a 350 starter if I can get it to clear the hole on the bellhousin worst case I cut it open a lil bit more but I'm just trying to figure out if this is a common issue or if other people experienced this. I have a engine mount small flywheel starter so I can mock everything up but I would like every one's opinion before I go and buy another starter because they don't do returns on anything electrical at the parts store here
apence021 is offline   Reply With Quote
Reply

Bookmarks

Tags
350 swap, help me out, starter trobleshooting

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com