TN GM Factory 12 Bolt Posi Chunk Rebuilt NICE! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dhart · 03-24-2013, 09:39 PM

Up for sale is my GM 12 bolt factory posi unit, four series carrier for 3.73 and up gears 30spline axels. It has been completely rebult with heavy duty clutches and springs, blasted and cleaned side gears and whole unit in perfect condition.
Bought this for my 72 and ended up selling the truck last year, have another truck but am about to sell out and fund another project for now. 325.00 firm shipped continental US.
Any questions call or text 901-553-2439 Dwayne.

tjmeadows · 03-24-2013, 09:46 PM

If this doesn't sell quickly, I might be interested if I could get cheaper by picking it up.
Posted via Mobile Device

dhart · 03-24-2013, 10:19 PM

300.00 picked up, let me know.

nobolt · 03-24-2013, 10:29 PM

interested but i dont think it will work for me...by any chance it would fit an HO72/52?

dhart · 03-24-2013, 10:42 PM

Not sure, it is an eaton 30060.

nobolt · 03-24-2013, 10:46 PM

anyone know for sure?

i'll do some reasearch in the morning but i dont think it will work...

**leddzepp** · 03-24-2013, 10:47 PM

It will not work on an HO rear end.
Posted via Mobile Device

nobolt · 03-25-2013, 05:37 AM

i'll pass then.
thank you Scott.

**29od1** · 03-25-2013, 08:18 AM

Hi Dwayne,
I'll take the posi unit pending no internal issues and a question. Can you tell me which spring and clutch set you put in?
Thanks,
David

**CC69Rat** · 03-25-2013, 08:46 AM

Ill take it should it get to me.

dhart · 03-25-2013, 08:49 AM

It has high carbon clutches, the steels were all measured and green 400lb springs, I bought this unit built and paid over asking price plus shipping, I dont have the paperwork but I have rebuilt several before and set up quite a few. It came with the specs on the steels fibers and springs. Side gears are in great shape as well.
I went this direction as i wanted a heavy duty setup but did not want a detroit locker as they do not have good street manners.
Let me know,
I will send you my pay pal if interested can ship tomorrow.

dhart · 03-25-2013, 08:50 AM

Will Let you know cc69

**CC69Rat** · 03-25-2013, 08:59 AM

I'm in, pending 29od1 .. don't want to step on toes. He has first shot, just know I'm here should he pass on it.

Thanks.
Chad

**29od1** · 03-25-2013, 09:06 AM

Dwayne, I'll take it. Please PM me payment info. I just wanted to make sure it was at least the 400# spring kit.
Thanks,
David

**CC69Rat** · 03-25-2013, 09:08 AM

(kidding..) Thanks anyway. Good luck with the rest of the transaction. Later.

dhart · 03-25-2013, 09:13 AM

Sold pending payment from 29Od1...

dhart · 03-25-2013, 10:19 AM

Payment received thanks!

03-24-2013, 09:39 PM	#1
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Up for sale is my GM 12 bolt factory posi unit, four series carrier for 3.73 and up gears 30spline axels. It has been completely rebult with heavy duty clutches and springs, blasted and cleaned side gears and whole unit in perfect condition. Bought this for my 72 and ended up selling the truck last year, have another truck but am about to sell out and fund another project for now. 325.00 firm shipped continental US. Any questions call or text 901-553-2439 Dwayne. Attached Images

03-24-2013, 09:46 PM	#2
tjmeadows Registered User Join Date: Oct 2012 Location: clarksville tennessee Posts: 948	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! If this doesn't sell quickly, I might be interested if I could get cheaper by picking it up. Posted via Mobile Device

03-24-2013, 10:19 PM	#3
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! 300.00 picked up, let me know.

03-24-2013, 10:29 PM	#4
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! interested but i dont think it will work for me...by any chance it would fit an HO72/52? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

03-24-2013, 10:42 PM	#5
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Not sure, it is an eaton 30060.

03-24-2013, 10:46 PM	#6
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! anyone know for sure? i'll do some reasearch in the morning but i dont think it will work... __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

03-24-2013, 10:47 PM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,979	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! It will not work on an HO rear end. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-25-2013, 05:37 AM	#8
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! i'll pass then. thank you Scott. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

03-25-2013, 08:18 AM	#9
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Hi Dwayne, I'll take the posi unit pending no internal issues and a question. Can you tell me which spring and clutch set you put in? Thanks, David

03-25-2013, 08:46 AM	#10
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Ill take it should it get to me. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-25-2013, 08:49 AM	#11
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! It has high carbon clutches, the steels were all measured and green 400lb springs, I bought this unit built and paid over asking price plus shipping, I dont have the paperwork but I have rebuilt several before and set up quite a few. It came with the specs on the steels fibers and springs. Side gears are in great shape as well. I went this direction as i wanted a heavy duty setup but did not want a detroit locker as they do not have good street manners. Let me know, I will send you my pay pal if interested can ship tomorrow.

03-25-2013, 08:50 AM	#12
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Will Let you know cc69

03-25-2013, 08:59 AM	#13
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! I'm in, pending 29od1 .. don't want to step on toes. He has first shot, just know I'm here should he pass on it. Thanks. Chad __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-25-2013, 09:06 AM	#14
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Dwayne, I'll take it. Please PM me payment info. I just wanted to make sure it was at least the 400# spring kit. Thanks, David

03-25-2013, 09:08 AM	#15
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! (kidding..) Thanks anyway. Good luck with the rest of the transaction. Later. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

03-25-2013, 09:13 AM	#16
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Sold pending payment from 29Od1...

03-25-2013, 10:19 AM	#17
dhart Registered User Join Date: Dec 2009 Location: Memphis TN Posts: 102	Re: GM Factory 12 Bolt Posi Chunk Rebuilt NICE! Payment received thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.