|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2013, 09:27 PM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: Northern IL.
Posts: 22
|
Cab Mount on Frame, Hole Diameter?
The cab mounts on my frame are all rusted and the hole sizes vary. Can anyone tell me the hole diameter so I can remake/repair the cab mounts?
Thanks for the help. Posted via Mobile Device |
|
|
|
05-02-2013, 08:45 PM
|
#2 |
|
Active Member
 Join Date: Aug 2007
Location: wisconsin
Posts: 112
|
Re: Cab Mount on Frame, Hole Diameter?
I just did this on mine also. If memory serves me correctly the left front and rear mounts are 1.3" diameter. The front right is actually 1.3"x1.8" slot (long goes from center to outside). These are numbers I used and got out of assembly manual.
Posted via Mobile Device |
|
|
|
|
05-03-2013, 02:22 PM
|
#3 |
|
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
|
Re: Cab Mount on Frame, Hole Diameter?
  
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
|
05-03-2013, 03:06 PM
|
#4 |
|
Registered User
Join Date: Mar 2013
Location: Northern IL.
Posts: 22
|
Re: Cab Mount on Frame, Hole Diameter?
Thanks for the info guys, much appreciated!
Posted via Mobile Device |
|
|
|
|
05-06-2013, 02:13 PM
|
#5 |
|
Registered User
Join Date: Mar 2013
Location: Northern IL.
Posts: 22
|
Re: Cab Mount on Frame, Hole Diameter?
Can I buy new mounts anywhere, or should I just plan on re-plating the exsiting ones?
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
