The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-20-2019, 07:28 PM   #1
BabyBlue
The Peacemaker
 
BabyBlue's Avatar
 
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
USA-1 quality questions

Had a question about USA-1 in regards to quality for our generation of pickup parts. I have only ever had carpet from them but how is their other stuff, especially door panels, dashes, etc. any better/worse than classic industries, brothers, or LMC?

Reason I ask is I noticed they are about the only supplier I can get mandarin orange replacement interior goods from. Like everything.

I have a few parts to order and wanted to try to order from one place if possible.
__________________
1978 Chevy 2wd Stepside
aka "Audrey"
Cordova brown with mandarin guts
79k original miles & being restored

1979 Chevy 2wd Short Wide
aka "Emma-Jayne"
Cordova brown with mandarin guts

2019 Chevy Tahoe LT


Previous rides:
-2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB.
BabyBlue is offline   Reply With Quote
Old 02-20-2019, 07:39 PM   #2
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

So far, everything I have gotten, has been better than the rest. Randy takes pride in his truck parts. And I have only heard good thing from other people.
TKCR is offline   Reply With Quote
Old 02-20-2019, 09:41 PM   #3
jkk
Registered User
 
jkk's Avatar
 
Join Date: Aug 2017
Location: Texas
Posts: 423
Re: USA-1 quality questions

I have their door panel headliner moldings and headliner speaker kick panel nice stuff and they did all of it in the custom color I wanted and it matched perfect I will use them again
jkk is offline   Reply With Quote
Old 02-20-2019, 10:22 PM   #4
BabyBlue
The Peacemaker
 
BabyBlue's Avatar
 
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
Re: USA-1 quality questions

Quote:
Originally Posted by jkk View Post
I have their door panel headliner moldings and headliner speaker kick panel nice stuff and they did all of it in the custom color I wanted and it matched perfect I will use them again
You have any pics?
__________________
1978 Chevy 2wd Stepside
aka "Audrey"
Cordova brown with mandarin guts
79k original miles & being restored

1979 Chevy 2wd Short Wide
aka "Emma-Jayne"
Cordova brown with mandarin guts

2019 Chevy Tahoe LT


Previous rides:
-2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB.
BabyBlue is offline   Reply With Quote
Old 02-21-2019, 07:38 AM   #5
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

They have a lot of videos on Youtube, that show their actual products on our trucks. Your only about 1 1/2hr drive from USA1. Right there, would save a ton of shipping costs. You can see all their products before purchasing. I will going down there myself soon. This is where is get all my NEW SEAT FOAM.
https://www.youtube.com/channel/UCNI...nAp3HSA/videos

Last edited by TKCR; 02-21-2019 at 07:48 AM.
TKCR is offline   Reply With Quote
Old 02-21-2019, 02:36 PM   #6
75C10
Registered User
 
Join Date: Oct 2014
Location: Calgary Alberta
Posts: 156
Re: USA-1 quality questions

Babyblue
Hope this works out well for you. I am also hoping to redo my original Mandarin Blazer interior. Are you planning buckets or bench? I am not certain which cloth insert I want although in 77 and 78 the seats were were just vinyl. My K5 is 77. But plaid is on the menu for me
75C10 is offline   Reply With Quote
Old 02-22-2019, 07:34 PM   #7
BabyBlue
The Peacemaker
 
BabyBlue's Avatar
 
Join Date: Feb 2005
Location: Kannapolis, NC
Posts: 783
Re: USA-1 quality questions

Quote:
Originally Posted by TKCR View Post
They have a lot of videos on Youtube, that show their actual products on our trucks. Your only about 1 1/2hr drive from USA1. Right there, would save a ton of shipping costs. You can see all their products before purchasing. I will going down there myself soon. This is where is get all my NEW SEAT FOAM.
https://www.youtube.com/channel/UCNI...nAp3HSA/videos
Thanks TKCR. I didn't know they were that close! I will be taking a trip up there when I get back from Japan. Videos helped a lot. Look forward to the trip up there.

Quote:
Originally Posted by 75C10 View Post
Babyblue
Hope this works out well for you. I am also hoping to redo my original Mandarin Blazer interior. Are you planning buckets or bench? I am not certain which cloth insert I want although in 77 and 78 the seats were were just vinyl. My K5 is 77. But plaid is on the menu for me

75C10,

Both a bench interior and low back buckets. I have two trucks I am redoing the interior in. Both trucks are cordova brown exterior and my stepside originally came with he mandarin, the shortwide came with saddle. I sold all the saddle stuff, taking what I can from my stepside over to the shortwide and buying all new for the stepside. I will definitely post reviews and updates. I'll be gone for a month, but when I get back I'll pick up the shortwide from the body shop from some rust repair and get to the interior in it.
Btw, A mandarin blazer interior is going to be a lot of orange! especially those back side panels.
__________________
1978 Chevy 2wd Stepside
aka "Audrey"
Cordova brown with mandarin guts
79k original miles & being restored

1979 Chevy 2wd Short Wide
aka "Emma-Jayne"
Cordova brown with mandarin guts

2019 Chevy Tahoe LT


Previous rides:
-2002 Firehawk T/A, 2006 Trailblazer SS AWD, 2014 GMC Sierra RCSB, 1971 2wd Blazer, 1996 SNB, 1997 2dr 2wd Yukon, 2001 Silverado RCSB, 2011 Silverado Z71 4x4, 1982 2wd Blazer, 1997 2dr Tahoe, 1970 Chevelle SS, 1972 2wd Blazer, 1986 Silverado Stepside, 1995 S-10, 1985 Silverado SWB.
BabyBlue is offline   Reply With Quote
Old 02-22-2019, 07:59 PM   #8
Tiger Joe
Registered User
 
Join Date: Mar 2015
Location: South of Pittsburgh
Posts: 425
Re: USA-1 quality questions

I used a couple of pieces from USA1 for our 79 carmine red. Everything from them was A+ and i think better than LMC
Tiger Joe is offline   Reply With Quote
Old 02-23-2019, 12:21 AM   #9
1968vetL-71
Junior Member
 
1968vetL-71's Avatar
 
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
Re: USA-1 quality questions

I just ordered two bottom foams, front and rear seat covers for my crew cab, front door panels complete, new blue dash pad kit, bezel kit, front kick panels and rear headliner panels and a bunch of odd and ends. Love their quality. and service is the best I've had with ANY other supplier. Parts are top notch.
__________________
1969 impala conv 427 #s loaded. dad bought new
1969 "Judge" RA-3, rare warwick blue/white, #'s
1968 vet convertible #s 427/435 tripower (sold)
1968 belair 2door post #s 427/385
1936 ford 5w coupe dads 1st car
1969 camaro ss (17,xxx) miles

Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.
1968vetL-71 is offline   Reply With Quote
Old 02-23-2019, 01:41 AM   #10
69GMC910
MOTORHEAD!
 
69GMC910's Avatar
 
Join Date: May 2000
Location: Devon AB, Canada
Posts: 849
Re: USA-1 quality questions

Not trying to hijack, but also very interested in the USA1 stuff...

Are the USA1 dash pads different from the Brothers/Lmc/Classic Parts dash pads?

Is there someone who makes “the best” dash pad?
__________________
82 GMC High Sierra
VortecPro 496
12 Bolt, 3.42's

AFR 265
Holley 850
Performer RPM Air Gap
Hooker 2455's
TCI Turbo 400 Super Street Fighter
TRRC 12 Bolt
Eaton Posi
Mark Williams Axles
Cal-Tracs
Hoosier 30x10.5 Radial Slick
Full weight long box pickup
Current best- 11.33@117mph
69GMC910 is offline   Reply With Quote
Old 02-23-2019, 09:11 AM   #11
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

Quote:
Originally Posted by 69GMC910 View Post
Not trying to hijack, but also very interested in the USA1 stuff...

Are the USA1 dash pads different from the Brothers/Lmc/Classic Parts dash pads?

Is there someone who makes “the best” dash pad?
When it comes to dash pads, I believe Cheyenne Parts are about the best. They have a link:

http://67-72chevytrucks.com/vboard/s...ight=dash+pads
TKCR is offline   Reply With Quote
Old 02-23-2019, 10:34 AM   #12
69GMC910
MOTORHEAD!
 
69GMC910's Avatar
 
Join Date: May 2000
Location: Devon AB, Canada
Posts: 849
Re: USA-1 quality questions

Thank you!
__________________
82 GMC High Sierra
VortecPro 496
12 Bolt, 3.42's

AFR 265
Holley 850
Performer RPM Air Gap
Hooker 2455's
TCI Turbo 400 Super Street Fighter
TRRC 12 Bolt
Eaton Posi
Mark Williams Axles
Cal-Tracs
Hoosier 30x10.5 Radial Slick
Full weight long box pickup
Current best- 11.33@117mph
69GMC910 is offline   Reply With Quote
Old 02-23-2019, 10:35 AM   #13
1968vetL-71
Junior Member
 
1968vetL-71's Avatar
 
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
Re: USA-1 quality questions

I have talked to people who have installed both brands during multiple restorations. Both were great fits and quality, but the USA1 I was told by a few had a more "correct" factory color. I was going to order my dash through Cheyenne, but after multiple calls requesting a date when they would be available and with never getting an answer, I went USA1 for it. It should be here next week. I will be glad to take pics and share my .02 on all of the stuff I ordered for my crew cab as I install it.
__________________
1969 impala conv 427 #s loaded. dad bought new
1969 "Judge" RA-3, rare warwick blue/white, #'s
1968 vet convertible #s 427/435 tripower (sold)
1968 belair 2door post #s 427/385
1936 ford 5w coupe dads 1st car
1969 camaro ss (17,xxx) miles

Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.
1968vetL-71 is offline   Reply With Quote
Old 02-23-2019, 10:48 AM   #14
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

I believe, when it comes to the dash pads, it is more about how the dash pad is built. Some places build them over a urethane frame, which is flimsy and will warp. I have seen a few of these and they are ugly. I believe Cheyenne and USA1 builds them on metal frames, which is like the OEM dashes. So either place will be your best bet. I have heard from more people, that the Cheyenne dashes, there is no trimming involved.
But customer service, definitely counts for something. So if you can't get a response from Cheyenne, that would get frustrating after awhile!!

Last edited by TKCR; 02-23-2019 at 10:56 AM.
TKCR is offline   Reply With Quote
Old 02-23-2019, 11:01 AM   #15
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

Here are a few threads on the dash pad subject. To get more insight on what other people have used and their thoughts.
http://67-72chevytrucks.com/vboard/s...ight=USA1+dash
http://67-72chevytrucks.com/vboard/s...ight=USA1+dash
TKCR is offline   Reply With Quote
Old 02-23-2019, 08:14 PM   #16
69GMC910
MOTORHEAD!
 
69GMC910's Avatar
 
Join Date: May 2000
Location: Devon AB, Canada
Posts: 849
Re: USA-1 quality questions

Thank you for the great info!
__________________
82 GMC High Sierra
VortecPro 496
12 Bolt, 3.42's

AFR 265
Holley 850
Performer RPM Air Gap
Hooker 2455's
TCI Turbo 400 Super Street Fighter
TRRC 12 Bolt
Eaton Posi
Mark Williams Axles
Cal-Tracs
Hoosier 30x10.5 Radial Slick
Full weight long box pickup
Current best- 11.33@117mph
69GMC910 is offline   Reply With Quote
Old 02-25-2019, 02:29 PM   #17
blindbug
Registered User
 
Join Date: Oct 2017
Location: Louisville, KY
Posts: 186
Re: USA-1 quality questions

This was my assessment of the USA1 Industries Dash Pad I installed late last year:

Quote:
Originally Posted by blindbug View Post
  1. I did like the finish of the pad itself. The material used very closely mimics the stock pad that I removed from my 86'.
  2. It required a bit of trimming to get the pad all the way seated on my dash... but that is to be expected with any of the aftermarket pads from my research.
  3. The paint that is on the pad (blue) was already rubbed off in some places before I even got it in the truck. Not enough to warrant a return, but it's sort of a let down.
  4. I ordered matching defrost vent covers, but they did not seat fully, as the hole wasn't large enough. I ended up having to cut off a (unseen) corner of the vent cover to get it to click into place.
  5. I odered a new aluminum dash insert. When I went to put that onto the pad, the holes didn't quite line up, and caused the insert to not seat fully. I used a dremel to make the hole a little lower and that helped some.
  6. The mold that they use is obviously designed for A/C vents, because there is a slight curve inward where the inner A/C vent would go, it isn't insane, but it creates a gap between the insert and the pad for about 3"... it wouldn't be noticable if the rest of the insert had the same gap, but because part of the insert sits up against the pad, this one 3" section looks bad (to me).
  7. The lower holes that hold the dash pad to the dash metal (there's like 5o f them). Those holes DO NOT HAVE ANY METAL REINFORCEMENT. The stock pad has metal embedded into those mounting tabs which means the pad holds down against the dash fully. Without the metal reinforcement, it took less than 10 minutes for one of the tabs to rip (it's all vinyl) instead of keep the pad in place. I ended up just removing all the screws because I'd rather have no screws than rips all across the bottom.
  8. The foam is too thick in parts, causing the dash pad to look wavy across the top. Especially above the driver's console, I have a big wave that I thought would lay down better, but I'm going to have to pull the pad, shave down a 3-4" section and then put the pad back in.
  9. The upper left and right sections where the drivers dash bezel sit against the pad need better screw retainers. The ones that are in there are glued? taped? I don't know... all I know is that the first screw went in and I hear 'ting' and the flat nut falls to the floor. The other side, same thing. I had to get a U nut and do some cutting and arranging to get the bezel to sit against the pad in this section... and even then after an hour of road time, the nut slipped off the pad and I have a gap again.

This is just one man's opinion. It's the little details that make or break a quality product, and I think the USA1 dash pad missed the little details. When you step back and look at the pad, it looks great... but anyone with a hobby vehicle knows that any imperfection you notice becomes the only thing you obsess over. Given the PRICE of the pad, I thought that these little things shouldn't have been such an issue. The lower retaining metal is a very simple fix, and feels sloppy that it wasn't fixed after the first version.

The Cheyenne pad could have the exact same issues... I don't know. All I know is that I wished I'd went with a different brand on the off chance that it wasn't an issue.
blindbug is offline   Reply With Quote
Old 02-28-2019, 07:20 PM   #18
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: USA-1 quality questions

I need a dash pad but I am staying away from anything with a plastic base. Plastic warps quickly in the desert heat. I am toying with the idea of having a local upholstery shop recover the original pad.
tucsonjwt is offline   Reply With Quote
Old 02-28-2019, 08:44 PM   #19
NJRC10
Registered User
 
Join Date: Apr 2016
Location: Ft.pierce. Fl
Posts: 76
Re: USA-1 quality questions

I have bought two dashes from Cheyenne and the first one was great about 3 years ago and my recent one I am not very happy with it is really flimsy and curves down on the passenge r side. The speaker holes are also really rough looking. Does not look good but better than my old cracked dash..I guess.
NJRC10 is offline   Reply With Quote
Old 02-28-2019, 11:21 PM   #20
zach_carver
Registered User
 
zach_carver's Avatar
 
Join Date: Aug 2014
Location: Blue Ridge,GA
Posts: 508
Re: USA-1 quality questions

I've not used them yet, but all I've read they get great reviews. Some of the beat quality interior parts and awesome dash pads for squares.
__________________
1965 C10 LS2/4l70, WHITE, 5/7 DROP

LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283

1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E

1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE
zach_carver is offline   Reply With Quote
Old 03-01-2019, 12:39 AM   #21
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,052
Re: USA-1 quality questions

None of the companies discussed make anything. They distribute things. Just as GM doesn't sell carrs, dealers do sell cars.
The difference is some company in Asia makes stuff, distributors in the US buy stuff, and companies in the US sell stuff. The point being, we have one (or at least few) stuff, and many sellers.
franken is online now   Reply With Quote
Old 03-02-2019, 08:46 PM   #22
72velle
Registered User
 
72velle's Avatar
 
Join Date: Jul 2018
Location: Bluffton, SC
Posts: 59
Re: USA-1 quality questions

USA-1 says their dash pads have a metal base.
Description from their website:
This is a reproduction vinyl dash pad of the original GM product. It was manufactured using a metal structure which is then covered in a foam and wrapped in a vinyl material. Our dash pads are died at a manufacturing level in house to the original GM colors. Along with this kit you will receive two defrost vents to the color of the dash and 6 clips and the vinyl dash pad will be equipped with the black plastic molding, Custom Deluxe emblem, two AC vent outlets and housings.
72velle is offline   Reply With Quote
Old 06-22-2022, 02:16 PM   #23
bluemichael927
Registered User
 
Join Date: May 2022
Location: California
Posts: 5
Re: USA-1 quality questions

I have been waiting since April 2021 for my door panels from USA1. They will give you lip service and delay your order without hesitation. Be wary of ordering fro them.
bluemichael927 is offline   Reply With Quote
Old 06-22-2022, 05:02 PM   #24
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,836
Re: USA-1 quality questions

Quote:
Originally Posted by bluemichael927 View Post
I have been waiting since April 2021 for my door panels from USA1. They will give you lip service and delay your order without hesitation. Be wary of ordering fro them.
They are just a small company with many many many orders to fill. And they are having trouble getting supplies that they need. I talk to them on a regular basis, because I do a lot of business with them. One day I was talking with them, and they had just gotten some supplies that they had been waiting along time for. This was going to give them the ability to fill over 700 door panel orders, and that wasn’t even putting a dent in the orders that they have.
TKCR is offline   Reply With Quote
Old 06-22-2022, 06:00 PM   #25
SuperC10Tex
Senior Member
 
SuperC10Tex's Avatar
 
Join Date: Oct 2012
Location: Texas
Posts: 567
Re: USA-1 quality questions

Quote:
Originally Posted by bluemichael927 View Post
I have been waiting since April 2021 for my door panels from USA1. They will give you lip service and delay your order without hesitation. Be wary of ordering fro them.
Oh "HELL NO"!! I just placed an order for door panels and dash pad 4/2022, USA-1 customer service assured me of the "10-16 week lead time"! I will be USA-1's worst form of advertisement on this forum and other forums if they take it past 16 weeks. TKCR, you stand up for USA-1, I understand were you are coming from, but.....

1.) USA-1, Don't take orders and state "10-16 week lead times", and know that is not true! If it could take 12 months, state "12 Month Lead Time"!!

2.) Not good customer service to require full payment up front and not deliver product in timely manner (as advertised).

My 16 week timeline is approching, I will reply then.....
__________________
1970 GMC Sierra Grande CST SWB Fleetside "Texas Touch"

"An intellectual is a man who takes more words than necessary to tell more than he knows"
SuperC10Tex is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com