'82 6.0 swap HEDDER/MANIFOLD question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kSStamp0182 · 01-09-2011, 04:52 PM

after much searching and confusion, i still have no idea who or where makes a LT hedder that will DEFINITELY fit my project. can someone please point me in the correct direction? also, i have F-body manifolds from an 01 SS i used to own. does anyone have confirmation that these will fit? if so i will just use them until a definite fitting hedder is released.

**Clyde65** · 01-09-2011, 06:49 PM

I dont have a square but I am told that Doug Thorely has LT header for your truck with the LS, also I have been told the TBSS manifolds work weel where you need them tucked close to the motor like block hugger shortie headers.

85burb · 01-09-2011, 07:16 PM

Dougs last time i checked does not have any. S&P sells some for close to 600 for shorties. I am going to try 98-02 f body headers. There is a person on here that has them installed. Think he had to slightly modify his controll arm or something.
http://67-72chevytrucks.com/vboard/s...d.php?t=411567

kSStamp0182 · 01-10-2011, 12:58 PM

Quote:

Originally Posted by 85burb

Dougs last time i checked does not have any. S&P sells some for close to 600 for shorties. I am going to try 98-02 f body headers. There is a person on here that has them installed. Think he had to slightly modify his controll arm or something.
http://67-72chevytrucks.com/vboard/s...d.php?t=411567

yeah all i could find from dougs was for earlier models. thanks for the info tho, lemme know how the fbodies go. im gonna try the fbod manifolds, they definitely hug the block better than the lq4s. we'll see how it goes.

**Clyde65** · 01-10-2011, 01:55 PM

I used Sanderson Headers on my swap, I like them but they are shorties and you might not want those, give them a call and see if they can help you.

olblue81 · 01-11-2011, 11:07 AM

These are the only ones I've found. They are made by Heddman and are a bit pricey but like I said, they are the only ones I've found.

http://www.brphotrods.com/mm5/mercha...ory_Code=CNV10

kSStamp0182 · 01-11-2011, 11:14 AM

Quote:

Originally Posted by olblue81

These are the only ones I've found. They are made by Heddman and are a bit pricey but like I said, they are the only ones I've found.

http://www.brphotrods.com/mm5/mercha...ory_Code=CNV10

alright! i remember they had them in the works forgot about them tho! thanks alot

01-09-2011, 04:52 PM	#1
kSStamp0182 LSX addict Join Date: Jun 2009 Location: Tyler, Texas Posts: 262	'82 6.0 swap HEDDER/MANIFOLD question after much searching and confusion, i still have no idea who or where makes a LT hedder that will DEFINITELY fit my project. can someone please point me in the correct direction? also, i have F-body manifolds from an 01 SS i used to own. does anyone have confirmation that these will fit? if so i will just use them until a definite fitting hedder is released.

01-09-2011, 06:49 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: '82 6.0 swap HEDDER/MANIFOLD question I dont have a square but I am told that Doug Thorely has LT header for your truck with the LS, also I have been told the TBSS manifolds work weel where you need them tucked close to the motor like block hugger shortie headers. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-09-2011, 07:16 PM	#3
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: '82 6.0 swap HEDDER/MANIFOLD question Dougs last time i checked does not have any. S&P sells some for close to 600 for shorties. I am going to try 98-02 f body headers. There is a person on here that has them installed. Think he had to slightly modify his controll arm or something. http://67-72chevytrucks.com/vboard/s...d.php?t=411567 __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-10-2011, 01:55 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: '82 6.0 swap HEDDER/MANIFOLD question I used Sanderson Headers on my swap, I like them but they are shorties and you might not want those, give them a call and see if they can help you. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-11-2011, 11:07 AM	#6
olblue81 Registered User Join Date: Jul 2005 Location: Saskatchewan Posts: 189	Re: '82 6.0 swap HEDDER/MANIFOLD question These are the only ones I've found. They are made by Heddman and are a bit pricey but like I said, they are the only ones I've found. http://www.brphotrods.com/mm5/mercha...ory_Code=CNV10 __________________ Stu- 1981 GMC Sierra Classic LWB 355- original 2 bolt block, 10.2:1, vortec heads, Comp XE268 cam, built by self in 1992 700R4-2000 stall with lockup, shift kit, Corvette servo 3.07 open diff- I need a 3.73 posi! 2nd owner since 1986 - 388,000 km and counting. 100k by the first owner and the rest by me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.