Smitty's 67 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHRIS67GMC · 04-23-2012, 11:36 AM

We are building a new Truck for Auto Cross and Road Racing probably a little Drag racing also. This will be a 1967 Chevy short bed.

Specs
Engine 434 inch small block Billet Crank, Crower Rods, Ross Pistons, Dart Heads, Comp Roller cam and shaft rockers. 700 hp

Trans T-56 with Dual disc clutch from American Power Train

Rear End Moser Fab 9 with 35 spline axles and a Al center section with a Wavetrac center.

Front suspension Rde Tech Arms, bags Triple adjustible shocks, sway bar amd a No Limit Steering Rack.

Rear suspensiom No Limit Fat Bar with Ride Tech Triple adjustible Shockwaves and a No Limit Sway Bar.

Brakes Wilwood 6 piston 14 inch rotors on front and 4 picton 14 inch rotors and the rear.

Frame boxed with tublar cross member and a full cage all chrome moly.

Starting point
Name: 001.jpg
Views: 4791
Size: 51.2 KB

Boxing Channels
Name: 040.jpg
Views: 4801
Size: 40.1 KB

Starting to Reinforce the frame
Name: c-10 010.jpg
Views: 4703
Size: 53.9 KB

CHRIS67GMC · 04-23-2012, 11:41 AM

Rear End parts from Moser
Name: c-10 006.jpg
Views: 4712
Size: 30.4 KB

Name: c-10 007.jpg
Views: 4699
Size: 35.2 KB

Dan from Clear Image Automotive Built me some custom Headers. Great place to deal with.
Name: c-10 001.jpg
Views: 4739
Size: 42.8 KB

1 3/4 inch tubes with merge collectors and v-band clams.
Name: c-10 002.jpg
Views: 4725
Size: 46.1 KB

CHRIS67GMC · 04-23-2012, 11:44 AM

I moved the engine as far back as I could without using the intake for a cup holder.
Name: c-10 008.jpg
Views: 4738
Size: 51.3 KB

More Frame pics
Name: c-10 011.jpg
Views: 4692
Size: 48.2 KB

Name: c-10 012.jpg
Views: 4719
Size: 56.6 KB

**67cheby** · 04-23-2012, 12:48 PM

LOOKS like a BEAST !!

Tinkermc · 04-23-2012, 01:05 PM

this is a wild thang I must keep watching

VA72C10 · 04-23-2012, 01:08 PM

Nice! Like the plans for this one!!!

**robnolimit** · 04-23-2012, 03:29 PM

Lookin good Chris, I like the rear frame kick - nice

trkfrk · 04-23-2012, 06:43 PM

This is going to be a build to watch.... Nice!

**SOON2BLAZE** · 04-23-2012, 08:00 PM

chris, I remember that 67 gmc stepper in your avitar. Is it still around? Nicest one with a newer step bed I've seen.

YBNORML · 04-23-2012, 10:24 PM

Sweet project! In for the ride

CHRIS67GMC · 04-24-2012, 07:42 AM

Yes I still have the 67 GMC It was my first car purchase when I was 15 it will get a new make over as soon as this one is done.

Norwalk Drag 11.16 124

Name: burn out.jpg
Views: 4589
Size: 43.4 KB

Sport Truck from back in the Day
Name: Copy of DSCN1305.jpg
Views: 4598
Size: 46.8 KB

PHR tv

Name: Copy of gmc-and-model.jpg
Views: 5257
Size: 23.6 KB

Name: Copy of gmc-driving.jpg
Views: 4519
Size: 23.5 KB

CHRIS67GMC · 04-24-2012, 08:17 AM

Rob from No Limit built the fuel tank. It has baffles in it and extra ports for the return line and a #10 outlet welded right in. Super nice top quility stuff.
Name: 027.jpg
Views: 4559
Size: 26.4 KB

http://www.nolimitparts.com/

I found some cool hardware from Devil Accessories
Name: 024.jpg
Views: 4494
Size: 70.0 KB

He also has some cool door pulls/handles. These should make is easy to get out and to close the door when strapped in.
Name: 026.jpg
Views: 4524
Size: 34.7 KB

http://www.devilaccessories.com/

djw32 · 04-25-2012, 11:48 AM

Damn! This is going to be sweet!
Posted via Mobile Device

ccracin · 04-25-2012, 12:52 PM

Very nice Chris! It's nice to see the right coast represented! Keep up the good work! I need to step up our progress!

sgaylord · 04-25-2012, 12:59 PM

Subscribed!

**robnolimit** · 04-25-2012, 03:18 PM

Chris, check out Speedway Engineering for a rear sway bar parts @ www.speedway1.com I'd use 1 1/4" 48 spline bars and arms. bars are avail in different lengths, 35", 36", 36.5", 37.5", 38.5".... An .095" wall bar is #608-095+length, a .125" wall bar is #608-125+length.

CHRIS67GMC · 04-25-2012, 08:09 PM

Here are some pics of the Fat Bar and the Shockwaves being installed. Just tacked everything together to make sure it all fits and works.
Name: c-10 002 (2).jpg
Views: 4501
Size: 62.0 KB

Name: c-10 002 (2).jpg
Views: 4501
Size: 62.0 KB

Name: c-10 004 (2).jpg
Views: 4440
Size: 47.2 KB

Name: c-10 005 (2).jpg
Views: 4390
Size: 18.5 KB

Name: c-10 007 (2).jpg
Views: 5445
Size: 50.0 KB

Name: c-10 008 (2).jpg
Views: 4468
Size: 40.6 KB

CHRIS67GMC · 04-25-2012, 08:11 PM

Name: c-10 009 (2).jpg
Views: 4371
Size: 40.1 KB

Name: c-10 010 (2).jpg
Views: 4425
Size: 46.9 KB

Name: c-10 012 (2).jpg
Views: 4370
Size: 37.9 KB

Name: c-10 014.jpg
Views: 4408
Size: 42.9 KB

Name: c-10 015.jpg
Views: 4513
Size: 46.9 KB

Tinkermc · 04-25-2012, 08:18 PM

I am really enjoying your build looks nice but not as nice as you in your bikini in post 11.

duallyjams · 04-25-2012, 08:31 PM

I'm digging this.

**67cheby** · 04-25-2012, 10:05 PM

Sweet
Posted via Mobile Device

sgaylord · 04-26-2012, 09:18 AM

Looks awesome. Are you planning to notch the frame at all or do you think you will be low enough without it? What about bump stops?

Steve

CHRIS67GMC · 04-26-2012, 01:03 PM

No notch in the frame we raised the rails 5.5 inches. There will be a bump stop above the axle. It should be 2 inches off the ground aired out.

CHRIS67GMC · 04-26-2012, 06:20 PM

Small update put the back brace on the housing. Got most of the panhard bar set up done.
Name: C-10 001 (3).jpg
Views: 4309
Size: 39.3 KB

Name: C-10 002 (3).jpg
Views: 4288
Size: 48.3 KB

CHRIS67GMC · 04-27-2012, 02:55 PM

Put it on the ground to see how it looks. It will sit about a inch lower when done.

Name: 015.jpg
Views: 4232
Size: 50.2 KB

Good view of how far back the engine is.

04-23-2012, 11:41 AM	#2
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Rear End parts from Moser Dan from Clear Image Automotive Built me some custom Headers. Great place to deal with. 1 3/4 inch tubes with merge collectors and v-band clams.

04-23-2012, 11:44 AM	#3
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build I moved the engine as far back as I could without using the intake for a cup holder. More Frame pics

04-23-2012, 12:48 PM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build LOOKS like a BEAST !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-23-2012, 01:05 PM	#5
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: Smitty's 67 Build this is a wild thang I must keep watching

04-23-2012, 03:29 PM	#7
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Smitty's 67 Build Lookin good Chris, I like the rear frame kick - nice __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

04-23-2012, 11:36 AM	#1
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Smitty's 67 Build We are building a new Truck for Auto Cross and Road Racing probably a little Drag racing also. This will be a 1967 Chevy short bed. Specs Engine 434 inch small block Billet Crank, Crower Rods, Ross Pistons, Dart Heads, Comp Roller cam and shaft rockers. 700 hp Trans T-56 with Dual disc clutch from American Power Train Rear End Moser Fab 9 with 35 spline axles and a Al center section with a Wavetrac center. Front suspension Rde Tech Arms, bags Triple adjustible shocks, sway bar amd a No Limit Steering Rack. Rear suspensiom No Limit Fat Bar with Ride Tech Triple adjustible Shockwaves and a No Limit Sway Bar. Brakes Wilwood 6 piston 14 inch rotors on front and 4 picton 14 inch rotors and the rear. Frame boxed with tublar cross member and a full cage all chrome moly. Starting point Boxing Channels Starting to Reinforce the frame Last edited by CHRIS67GMC; 04-23-2012 at 11:52 AM.

04-23-2012, 01:08 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Smitty's 67 Build Nice! Like the plans for this one!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-23-2012, 06:43 PM	#8
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Smitty's 67 Build This is going to be a build to watch.... Nice! __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

04-23-2012, 08:00 PM	#9
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 905	Re: Smitty's 67 Build chris, I remember that 67 gmc stepper in your avitar. Is it still around? Nicest one with a newer step bed I've seen.

04-23-2012, 10:24 PM	#10
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: Smitty's 67 Build Sweet project! In for the ride __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

04-24-2012, 07:42 AM	#11
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Yes I still have the 67 GMC It was my first car purchase when I was 15 it will get a new make over as soon as this one is done. Norwalk Drag 11.16 124 Sport Truck from back in the Day PHR tv

04-24-2012, 08:17 AM	#12
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Rob from No Limit built the fuel tank. It has baffles in it and extra ports for the return line and a #10 outlet welded right in. Super nice top quility stuff. http://www.nolimitparts.com/ I found some cool hardware from Devil Accessories He also has some cool door pulls/handles. These should make is easy to get out and to close the door when strapped in. http://www.devilaccessories.com/

04-25-2012, 11:48 AM	#13
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Smitty's 67 Build Damn! This is going to be sweet! Posted via Mobile Device

04-25-2012, 12:52 PM	#14
ccracin CCTek Join Date: Apr 2007 Location: Rostraver, PA Posts: 235	Re: Smitty's 67 Build Very nice Chris! It's nice to see the right coast represented! Keep up the good work! I need to step up our progress! __________________ Chad 68 swb Project http://67-72chevytrucks.com/vboard/s...d.php?t=262840 72 swb Project SOLD http://67-72chevytrucks.com/vboard/s...=1#post3993641 THANKS TO: Hermance Design (www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Tri-State Machine, Wegner Automotive Research, Nsane Hotrodz (www.nsanehotrodz.com), Clayton Machine Works, CCTek (http://www.candctek.com)

04-25-2012, 12:59 PM	#15
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Smitty's 67 Build Subscribed! __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!



Register or Log In To remove these advertisements.

04-25-2012, 03:18 PM	#16
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Smitty's 67 Build Chris, check out Speedway Engineering for a rear sway bar parts @ www.speedway1.com I'd use 1 1/4" 48 spline bars and arms. bars are avail in different lengths, 35", 36", 36.5", 37.5", 38.5".... An .095" wall bar is #608-095+length, a .125" wall bar is #608-125+length. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

04-25-2012, 08:09 PM	#17
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Here are some pics of the Fat Bar and the Shockwaves being installed. Just tacked everything together to make sure it all fits and works.

04-25-2012, 08:11 PM	#18
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build

04-25-2012, 08:18 PM	#19
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: Smitty's 67 Build I am really enjoying your build looks nice but not as nice as you in your bikini in post 11.

04-25-2012, 08:31 PM	#20
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Smitty's 67 Build I'm digging this. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-25-2012, 10:05 PM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build Sweet Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-26-2012, 09:18 AM	#22
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Smitty's 67 Build Looks awesome. Are you planning to notch the frame at all or do you think you will be low enough without it? What about bump stops? Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

04-26-2012, 01:03 PM	#23
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build No notch in the frame we raised the rails 5.5 inches. There will be a bump stop above the axle. It should be 2 inches off the ground aired out.

04-26-2012, 06:20 PM	#24
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Small update put the back brace on the housing. Got most of the panhard bar set up done.

04-27-2012, 02:55 PM	#25
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Put it on the ground to see how it looks. It will sit about a inch lower when done. Good view of how far back the engine is.

Register or Log In To remove these advertisements.