US Body Fiberglass Tub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CDN72K5 · 05-01-2021, 05:36 PM

Does anyone have experience with the fiberglass tub from US Body?

**Getter-Done** · 05-01-2021, 06:11 PM

I have a front clip that is from US Body.

That is made to be a flip forward front-end.
FCG-80

http://www.usbody.com/pages_trucks/73-chevy.htm

No exp. with tub though.

.

CDN72K5 · 05-01-2021, 07:50 PM

Thanks

68Timber · 05-02-2021, 07:24 PM

I didn't know about these. Interesting, and I need a tub.

**1968k20** · 05-20-2021, 10:21 PM

Following

Keith Seymore · 05-21-2021, 08:50 AM

Not with the "tub" per se, but I do have several US Body Source parts.

They are the only ones (or pretty much) that carry fiberglass parts for my Chevelle. I have a flat bolt on hood, a cowl lift off hood, and a fiberglass front bumper.

Quality is not outstanding but can be made to work. Additionally, if they don't presently carry a particular part they will make one for you if you give them a workable pattern (ie, an existing steel part).

K

CDN72K5 · 05-21-2021, 01:43 PM

That is good info. Thanks Keith

05-01-2021, 05:36 PM	#1
CDN72K5 Registered User Join Date: Jan 2021 Location: Guelph Ontario Posts: 4	US Body Fiberglass Tub Does anyone have experience with the fiberglass tub from US Body?

05-01-2021, 06:11 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,701	Re: US Body Fiberglass Tub I have a front clip that is from US Body. That is made to be a flip forward front-end. FCG-80 http://www.usbody.com/pages_trucks/73-chevy.htm No exp. with tub though. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

05-01-2021, 07:50 PM	#3
CDN72K5 Registered User Join Date: Jan 2021 Location: Guelph Ontario Posts: 4	Re: US Body Fiberglass Tub Thanks

05-02-2021, 07:24 PM	#4
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: US Body Fiberglass Tub I didn't know about these. Interesting, and I need a tub. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

05-20-2021, 10:21 PM	#5
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: US Body Fiberglass Tub Following __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-21-2021, 08:50 AM	#6
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,142	Re: US Body Fiberglass Tub Not with the "tub" per se, but I do have several US Body Source parts. They are the only ones (or pretty much) that carry fiberglass parts for my Chevelle. I have a flat bolt on hood, a cowl lift off hood, and a fiberglass front bumper. Quality is not outstanding but can be made to work. Additionally, if they don't presently carry a particular part they will make one for you if you give them a workable pattern (ie, an existing steel part). K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

05-21-2021, 01:43 PM	#7
CDN72K5 Registered User Join Date: Jan 2021 Location: Guelph Ontario Posts: 4	Re: US Body Fiberglass Tub That is good info. Thanks Keith



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.