67-72 Bolt in pedal assembly - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

abadsvt · 02-01-2009, 02:33 PM

Whoops for some reason i missed that pic when you posted all those other pics. If you end up changing your mind about having the exhaust hang below the frame you can always wrap the exhaust with a heat shield wrap so you don't ruin any of you paint. Just an idea. I agree with Nate on that is pretty cool that scotts hod rods is willing to work with you. Another great company to do business with

.

Josh

Scottshotrods · 02-02-2009, 11:52 PM

Quote:

Originally Posted by jlaird

At full dump, the bottom of the frame is 1.75" off the ground. Are you talking about this picture? In this picture, the exhaust pipe is hitting the booster and it is still below the bottom of the frame rail by 1". In other words, with the pipe up against the booster and pan, it is .75" from the ground and like I said, below the frame (which I never wanted)

For some reason in that picture that Scotts posted, it looks like there is A LOT more room between the booster assembly and trans. But then again, that is a weld on unit on a modified frame, not exactly the same as what I have.

I'll give you a guys a call this coming week. I'm not putting blame on anybody here and from talking to justin in the past, I know he will do everything he can to help.

Thanks.

Josh call us at the shop (805)485-0382 ask for Jeph or
myself.We will take care of you 100%.
Justin

jephs422 · 02-01-2009, 01:24 PM

jlaird-

I really wish I knew why it doesn't seem to be working for you. When I spoke with Justin about this last he said we were waiting on some pictures from you. Either way, I'll gladly exchange it for an under dash unit, or if that doesn't suit you, feel free to return the whole assembly.

I do agree that you can run it under the booster and trans in that location though. You had said earlier that the portion of your frame there doesn't lay out and it should not have to hang too low at all.

Either way, give a call down if you would like to exchange or return that unit.

PBFAB.COM · 02-01-2009, 01:33 PM

If the application doesn't work as intended, or "fit" in this case, any reputable company would take it back or offer a solution that will work. That sounds just like what has been offered by Scott's Hot Rods...

VA72C10 · 03-24-2009, 03:26 PM

Did this ever get figured out? I am thinking about ordering one of these for a blazer build and want to know if the issues have been resolved. Thanks!

jlaird · 03-24-2009, 05:45 PM

I exchanged it for an under dash assembly.

VA72C10 · 03-24-2009, 08:51 PM

Quote:

Originally Posted by jlaird

I exchanged it for an under dash assembly.

Thanks for the update...how is that working out and is there interference issues with factory or aftermarket A/C controls? Maybe jeff or scotts can chime in?

Scottshotrods · 03-25-2009, 12:12 AM

Quote:

Originally Posted by VA72C10

Thanks for the update...how is that working out and is there interference issues with factory or aftermarket A/C controls? Maybe jeff or scotts can chime in?

we have installed our under the dash pedal in a 68 chevy
pick-up running a hotrod air after market ac unit no
issues with the install.We also installed a speciality
wiper unit under the dash.The factory wiper motor
was in the way.

We have a customer that just called us and said he just
installed the under the dash unit he said he had no issues
with the factory ac.I asked him on the stock wiper he said
he shaved the cowl smooth no wipers.
Hopefully this helps you out on making your decision.
justin
www.scottshotrds.com

VA72C10 · 03-25-2009, 12:21 AM

Quote:

Originally Posted by Scottshotrods

we have installed our under the dash pedal in a 68 chevy
pick-up running a hotrod air after market ac unit no
issues with the install.We also installed a speciality
wiper unit under the dash.The factory wiper motor
was in the way.

We have a customer that just called us and said he just
installed the under the dash unit he said he had no issues
with the factory ac.I asked him on the stock wiper he said
he shaved the cowl smooth no wipers.
Hopefully this helps you out on making your decision.
justin
www.scottshotrds.com

How much then for the underdash unit with the specialty wiper unit? Thanks!

Scottshotrods · 03-25-2009, 12:29 AM

Quote:

Originally Posted by VA72C10

How much then for the underdash unit with the specialty wiper unit? Thanks!

do you want the under the dash unit with a power brake
booster.Do you want the remote res to fill it up.Do
you plan on filling it up from the under side of the dash.
For the wiper motor kit do you want this with two speed
control?One more last thing if you call us on wed we can
give you discount on both items.If you are interested
in our ifs we can do a package deal for you if you like.
Justin
www.scottshotrods.com

02-01-2009, 02:33 PM	#1
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: 67-72 Bolt in pedal assembly Whoops for some reason i missed that pic when you posted all those other pics. If you end up changing your mind about having the exhaust hang below the frame you can always wrap the exhaust with a heat shield wrap so you don't ruin any of you paint. Just an idea. I agree with Nate on that is pretty cool that scotts hod rods is willing to work with you. Another great company to do business with. Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

02-01-2009, 01:24 PM	#3
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: 67-72 Bolt in pedal assembly jlaird- I really wish I knew why it doesn't seem to be working for you. When I spoke with Justin about this last he said we were waiting on some pictures from you. Either way, I'll gladly exchange it for an under dash unit, or if that doesn't suit you, feel free to return the whole assembly. I do agree that you can run it under the booster and trans in that location though. You had said earlier that the portion of your frame there doesn't lay out and it should not have to hang too low at all. Either way, give a call down if you would like to exchange or return that unit. __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

02-01-2009, 01:33 PM	#4
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 67-72 Bolt in pedal assembly If the application doesn't work as intended, or "fit" in this case, any reputable company would take it back or offer a solution that will work. That sounds just like what has been offered by Scott's Hot Rods... __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

03-24-2009, 03:26 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67-72 Bolt in pedal assembly Did this ever get figured out? I am thinking about ordering one of these for a blazer build and want to know if the issues have been resolved. Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-24-2009, 05:45 PM	#6
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 67-72 Bolt in pedal assembly I exchanged it for an under dash assembly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.