|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-29-2023, 01:59 PM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: New Boston, New Hampshire
Posts: 35
|
1972 K20 hydraulic clutch conversion
Putting a 5.3 in a 72 K20 with a sm465 4spd. I know I need to convert to hydraulic clutch to eliminate the z bar linkage. At one point I had read you could us Advance Aadapters bracket #715535 on the original cast bell housing, but can't seem to find this info again to confirm before I start purchasing parts. Anyone that has done this that can chime in?
|
|
|
|
01-30-2023, 07:04 PM
|
#2 |
|
Senior Member
 Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: 1972 K20 hydraulic clutch conversion
Yes, you can do this. I did this with my 66 K20 down in sig below. The part number you want is 716287.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
|
|
|
|
01-31-2023, 11:30 AM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: New Boston, New Hampshire
Posts: 35
|
Re: 1972 K20 hydraulic clutch conversion
Ok, thank you. What slave cylinder did you use with it?
|
|
|
|
|
01-31-2023, 02:58 PM
|
#4 |
|
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: 1972 K20 hydraulic clutch conversion
Here is the whole setup that I used -
https://www.summitracing.com/parts/add-716287 https://www.summitracing.com/parts/add-716116 https://www.summitracing.com/parts/wil-260-6766
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
|
|
|
|
01-31-2023, 05:30 PM
|
#5 |
|
Registered User
Join Date: Aug 2012
Location: New Boston, New Hampshire
Posts: 35
|
Re: 1972 K20 hydraulic clutch conversion
Thank you, appreciate the info!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
