64 C10 project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 01-04-2021, 09:26 AM

Interior looks very good.

dream66 · 01-14-2021, 11:12 AM

Had to pull the OEM bench seat out and send it out to a different upholster guy. The foam was about 2 " too thick and the guy that did the work is in jail.

So.....gonna hafta pay twice to git 'er dun right.

Grrrrrrrrrrrrrrrrrrrrrrrrrr

Today we'll be conducting continuity checks on all the lights, accessories and gauges after installing the front clip.

More pics coming after clip install.

dream66 · 01-21-2021, 03:17 PM

Pics:

SCOTI · 01-21-2021, 04:20 PM

Wow. That thing is turning out VERY nice!

**The Rocknrod** · 01-21-2021, 05:33 PM

You've done some really good work on this truck, looks great.

dream66 · 01-21-2021, 05:44 PM

Credit goes to two 3 great paint & body guys and 1 mechanic. I'm just the janitor and paymaster.

p.s. The bed wood was milled by and donated by my next door neighbor for loaning him my tractor.

SCOTI · 01-21-2021, 06:09 PM

Quote:

Originally Posted by dream66

Credit goes to two 3 great paint & body guys and 1 mechanic. I'm just the janitor and paymaster.

p.s. The bed wood was milled by and donated by my next door neighbor for loaning him my tractor.

You're coordinating the efforts & direction. Kudo's for doing it well.

**jkeating1** · 01-21-2021, 07:17 PM

I'm guessing from the "Y" and "D" I can make out on that bumper, that it says Boyd Mullen Chev Pasadena Tx.

dream66 · 01-21-2021, 07:23 PM

Well aren't you a steely eyed investigator.

There were two welds where the bumper had been abused and cracked and one of my guys "re-engraved" a couple of letters that the welds had damaged.

That was done after the pic. I'll have new pics up once we install the bumper.

**jkeating1** · 01-21-2021, 07:56 PM

My father was a Chevy dealer in that east Houston market from 1958 to 2010, so I was very familiar with the names of the dealers around Houston in the 60's. And I hung hundreds of those dealer-installed bumpers in those days.

dream66 · 01-21-2021, 08:33 PM

That is really cool. Your finger prints may be all over this one.

My uncle that bought it new lived in Bellaire which is west central Houston. He probably saved $10 by driving to Pasadena to buy it vs Jimmy Green or Courtesy which were closer.

**jkeating1** · 01-21-2021, 10:32 PM

No, we were a little farther east, in Winnie. So I didn't get my hands on yours!

88Stanger · 01-22-2021, 10:27 AM

nice work!!

**Ol Blue K20** · 01-22-2021, 11:24 AM

Looks great

straight6chevyguy · 01-31-2021, 12:47 PM

Looking good.

dream66 · 02-04-2021, 07:23 PM

Time for the unveiling.
All complete including the wooden console that my dad built back in the 70's.

Ooops. So excited about doing a photo shoot that we forgot to install the bed steps after removing for paint touch-up.

Threw in some additional eye candy in the background. Enjoy.

SCOTI · 02-04-2021, 07:31 PM

Awesome!

dream66 · 02-04-2021, 07:33 PM

More pics

**cwcarpenter98** · 02-04-2021, 08:21 PM

Very nice! I love that stock height look

**Ol Blue K20** · 02-05-2021, 08:46 AM

Very nice! I like it.....

**MT65** · 02-06-2021, 12:09 PM

You have done a great job on this restoration, the fact that was a “family “ truck , makes it even more special....now drive it and enjoy all of your labors.....

dream66 · 02-06-2021, 12:33 PM

Oh the memories...

Driving to the hunting lease 3 abreast - my dad, my brother and I. We had a ritual of stopping at the halfway point in Hempstead, TX to get a dip cone at the DQ. My bro and I are planning to make that road trip in the spring.

The time I high centered it on a dirt road at the deer lease and had to walk 4 miles to find a farmer with a tractor to pull it out.

My last traffic ticket (40 years ago) for an illegal left turn at S. Shepherd and W. Alabama in Houston. Grrrrr.

Hauling building materials to my brothers log cabin that the 3 of us built in the late 80's.

I could go on and on.

01-04-2021, 09:26 AM	#26
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 64 C10 project Interior looks very good. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

01-14-2021, 11:12 AM	#27
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Had to pull the OEM bench seat out and send it out to a different upholster guy. The foam was about 2 " too thick and the guy that did the work is in jail. So.....gonna hafta pay twice to git 'er dun right. Grrrrrrrrrrrrrrrrrrrrrrrrrr Today we'll be conducting continuity checks on all the lights, accessories and gauges after installing the front clip. More pics coming after clip install.

01-21-2021, 03:17 PM	#28
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Pics: Attached Images

01-21-2021, 04:20 PM	#29
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: 64 C10 project Wow. That thing is turning out VERY nice! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-21-2021, 05:33 PM	#30
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 64 C10 project You've done some really good work on this truck, looks great. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-21-2021, 05:44 PM	#31
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Credit goes to two 3 great paint & body guys and 1 mechanic. I'm just the janitor and paymaster. p.s. The bed wood was milled by and donated by my next door neighbor for loaning him my tractor.

01-21-2021, 07:17 PM	#33
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: 64 C10 project I'm guessing from the "Y" and "D" I can make out on that bumper, that it says Boyd Mullen Chev Pasadena Tx. Attached Images __________________ JK

01-21-2021, 07:23 PM	#34
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Well aren't you a steely eyed investigator. There were two welds where the bumper had been abused and cracked and one of my guys "re-engraved" a couple of letters that the welds had damaged. That was done after the pic. I'll have new pics up once we install the bumper.

01-21-2021, 07:56 PM	#35
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: 64 C10 project My father was a Chevy dealer in that east Houston market from 1958 to 2010, so I was very familiar with the names of the dealers around Houston in the 60's. And I hung hundreds of those dealer-installed bumpers in those days. __________________ JK

01-21-2021, 08:33 PM	#36
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project That is really cool. Your finger prints may be all over this one. My uncle that bought it new lived in Bellaire which is west central Houston. He probably saved $10 by driving to Pasadena to buy it vs Jimmy Green or Courtesy which were closer.

01-21-2021, 10:32 PM	#37
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: 64 C10 project No, we were a little farther east, in Winnie. So I didn't get my hands on yours! __________________ JK

01-22-2021, 10:27 AM	#38
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: 64 C10 project nice work!! __________________ John 3:16 - Saved me... God Bless

01-22-2021, 11:24 AM	#39
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 64 C10 project Looks great __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

01-31-2021, 12:47 PM	#40
straight6chevyguy Registered User Join Date: Dec 2018 Location: yamhill OR Posts: 785	Re: 64 C10 project Looking good. __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1998 chevy c1500 4.3L 5speed (My current driver) 2002 Chevy s10 4.3L auto 4x4 1971 mercury monterey wagon 400 auto To many projects!

02-04-2021, 07:23 PM	#41
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Time for the unveiling. All complete including the wooden console that my dad built back in the 70's. Ooops. So excited about doing a photo shoot that we forgot to install the bed steps after removing for paint touch-up. Threw in some additional eye candy in the background. Enjoy. Attached Images



Register or Log In To remove these advertisements.

02-04-2021, 07:31 PM	#42
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: 64 C10 project Awesome! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-04-2021, 07:33 PM	#43
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project More pics Attached Images

02-04-2021, 08:21 PM	#44
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 64 C10 project Very nice! I love that stock height look __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

02-05-2021, 08:46 AM	#45
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 64 C10 project Very nice! I like it..... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

02-06-2021, 12:09 PM	#46
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: 64 C10 project You have done a great job on this restoration, the fact that was a “family “ truck , makes it even more special....now drive it and enjoy all of your labors.....

02-06-2021, 12:33 PM	#47
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: 64 C10 project Oh the memories... Driving to the hunting lease 3 abreast - my dad, my brother and I. We had a ritual of stopping at the halfway point in Hempstead, TX to get a dip cone at the DQ. My bro and I are planning to make that road trip in the spring. The time I high centered it on a dirt road at the deer lease and had to walk 4 miles to find a farmer with a tractor to pull it out. My last traffic ticket (40 years ago) for an illegal left turn at S. Shepherd and W. Alabama in Houston. Grrrrr. Hauling building materials to my brothers log cabin that the 3 of us built in the late 80's. I could go on and on.

Register or Log In To remove these advertisements.