where's waldo? Bumper guard again - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chopit · 02-11-2016, 11:05 AM

Ok, my bumper guard has 2 uprights that are not the same. I think one is original and one is JC Whitney maybe. I don't have it in my possession at this time due to it being dug out of storage but to my recollection of discussion at purchase the rusty one in the picture is shorter and maybe has thicker ridges. If anyone has one upright available that would match one or the other of mine (hopefully the one on right). The other thread reminded me to start searching this out.

edit: I don't have exact diminsions until I put my hands on them which will be a few days and actually tried to cancel this post until then but I just discovered it accidently posted lol.

mr48chev · 02-11-2016, 04:50 PM

I've got one that the only part that is almost usable is the right upright and one bar.

Know what? and until I just looked at the photo, the uprights are totally different from each other and the drivers side one looks like it has more ridges yet.

mr48chev · 02-11-2016, 06:17 PM

Well that theory sure didn't fly. It must be the way the light hits the drivers side upright in the photos.

Both uprights have three ribs when you look at them close.

It also seems but I am not positive that they are identical and there isn't a left and right but I still need to do some more checking on that.

chopit · 02-11-2016, 06:54 PM

Quote:

Originally Posted by mr48chev

Well that theory sure didn't fly. It must be the way the light hits the drivers side upright in the photos.

Both uprights have three ribs when you look at them close.

It also seems but I am not positive that they are identical and there isn't a left and right but I still need to do some more checking on that.

That's funny when I first looked at picture I thought same thing u ntilI looked towards bottom of the upright.

I think there is not a left and right also but don't have mine in hand. If you are willing to part with it just pm me with price.

Thank you Rob,

Richard

Foot Stomper · 02-11-2016, 08:54 PM

Not mine
Here's one for sale on FB
https://www.facebook.com/groups/47.5...6223143567170/

mr48chev · 02-11-2016, 09:06 PM

That guy always wants a bit more for his junk than I think it's worth.

Here's a shot of the back side of the one on the drivers side. It also has all the brackets. I'll send you a pm as I'm getting tired of moving the thing around.

Top of back

Gives a good at how they are put together.

chopit · 02-11-2016, 09:38 PM

Quote:

Originally Posted by Foot Stomper

Not mine
Here's one for sale on FB
https://www.facebook.com/groups/47.5...6223143567170/

Holey crap! That things roached. Me thinks he has lost his mind. jmho lol

02-11-2016, 11:05 AM	#1
chopit Registered User Join Date: Aug 2015 Location: Gravette Ar Posts: 296	where's waldo? Bumper guard again Ok, my bumper guard has 2 uprights that are not the same. I think one is original and one is JC Whitney maybe. I don't have it in my possession at this time due to it being dug out of storage but to my recollection of discussion at purchase the rusty one in the picture is shorter and maybe has thicker ridges. If anyone has one upright available that would match one or the other of mine (hopefully the one on right). The other thread reminded me to start searching this out. edit: I don't have exact diminsions until I put my hands on them which will be a few days and actually tried to cancel this post until then but I just discovered it accidently posted lol. Attached Images Last edited by chopit; 02-11-2016 at 12:14 PM.

02-11-2016, 04:50 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,314	Re: where's waldo? Bumper guard again I've got one that the only part that is almost usable is the right upright and one bar. Know what? and until I just looked at the photo, the uprights are totally different from each other and the drivers side one looks like it has more ridges yet. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-11-2016, 06:17 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,314	Re: where's waldo? Bumper guard again Well that theory sure didn't fly. It must be the way the light hits the drivers side upright in the photos. Both uprights have three ribs when you look at them close. It also seems but I am not positive that they are identical and there isn't a left and right but I still need to do some more checking on that. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-11-2016, 08:54 PM	#5
Foot Stomper Registered User Join Date: Oct 2015 Location: Calgary, Alberta Posts: 1,252	Re: where's waldo? Bumper guard again Not mine Here's one for sale on FB https://www.facebook.com/groups/47.5...6223143567170/ __________________ So when is this "Old enough to know better" supposed to kick in? My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989

02-11-2016, 09:06 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,314	Re: where's waldo? Bumper guard again That guy always wants a bit more for his junk than I think it's worth. Here's a shot of the back side of the one on the drivers side. It also has all the brackets. I'll send you a pm as I'm getting tired of moving the thing around. Top of back Gives a good at how they are put together. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 02-11-2016 at 09:23 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.