Parting out 1966 GMC, 63 GMC, 65 Chevy K20... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kennyw · 01-21-2003, 09:51 PM

I have a few extra parts to sell pics are in my webshots album
http://community.webshots.com/user/nibbsmtn
Look in the "For Sale" and "For Sale ** Parting out 1966 GMC" albums:

1966 GMC 3/4 ton 2wd auto, mainly surface rust only but one front fender has rusted thru and bottom surface of door is rusty.
$300 for the whole truck (minus V6 engine, V6 to auto tranny adapter, hood, and dash panel) or part out, clear WA title.

1963 GMC cab only. Stripped, rust free, no surface rust, will fit 1963-66 frames, pass door dented but still rust free.
no drivers door, dash panel, switches, steering column... basically what is in the pics is what you get
$100

1965 Chevy K20 frame and leaf springs w/ rust free cab and front fenders. Body heavily abused and missing doors and box (was a flatbed that I removed).
$100

Misc parts:
1960-65 GMC grill. rust free, & straight $75

Forgot to mention I can deliver or meet you between Oregon and Illinois over Memorial day weekend (basically along I-80).

red450ih · 01-22-2003, 04:22 PM

If you were closer to Tennessee I would take the 65 K20 frame. Don't see many of those down this way. I've been looking for a 67-72 4WD frame to put under my 65 C10, no luck as of yet.

Keith

kennyw · 01-22-2003, 04:56 PM

Keith,

I am meeting a guy from Kentucky in Illinois over Memorial Day Weekend. If you would consider driving up to Galva, IL to meet me we might be able to work something out.

kennyw · 01-22-2003, 08:36 PM

Currently I have a sale pending on:
63 GMC cab
automatic column & related parts from the 66 GMC
inner fenders and front end sheet metal from the 65 Chevy cab

GMCRescue · 02-18-2003, 06:19 PM

Hi friend,

Just wondering if your still parting out your '66. I'm looking for compatible front end body parts for my '65 GMC.

Thanks

**jerry moss** · 02-19-2003, 08:18 PM

i'm interested in the 4x4 frame if the other person decides not to take it. please p.m. me your phone number if it's still available. thank you.

GMCRescue · 02-20-2003, 08:07 PM

Hey Jerry,

Sorry to say that the Toyota 4x4 frame was pretty well tweaked,
that's why it went to the scrap yard. I just about knocked the rear axle off the frame and bent the frame just behind the driver side door.

I'm sorry that it all happened but glad nobody got hurt.

(BTW - for the benefit of the curious souls among us, it was 8:30 AM on a clear day and nobody was drunk at the time. It was all my fault and nobody gets to hire a lawyer!)

01-21-2003, 09:51 PM	#1
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 129	Parting out 1966 GMC, 63 GMC, 65 Chevy K20... I have a few extra parts to sell pics are in my webshots album http://community.webshots.com/user/nibbsmtn Look in the "For Sale" and "For Sale Parting out 1966 GMC" albums: 1966 GMC 3/4 ton 2wd auto, mainly surface rust only but one front fender has rusted thru and bottom surface of door is rusty. $300 for the whole truck (minus V6 engine, V6 to auto tranny adapter, hood, and dash panel) or part out, clear WA title. 1963 GMC cab only. Stripped, rust free, no surface rust, will fit 1963-66 frames, pass door dented but still rust free. no drivers door, dash panel, switches, steering column... basically what is in the pics is what you get $100 1965 Chevy K20 frame and leaf springs w/ rust free cab and front fenders. Body heavily abused and missing doors and box (was a flatbed that I removed). $100 Misc parts: 1960-65 GMC grill. rust free, & straight $75 Forgot to mention I can deliver or meet you between Oregon and Illinois over Memorial day weekend (basically along I-80). __________________ "I got it one piece at a time and it didn't cost me a dime..."**

01-22-2003, 04:22 PM	#2
red450ih Registered User Join Date: Mar 2001 Location: Nashville, Tennessee Posts: 225	65 K20 If you were closer to Tennessee I would take the 65 K20 frame. Don't see many of those down this way. I've been looking for a 67-72 4WD frame to put under my 65 C10, no luck as of yet. Keith

01-22-2003, 04:56 PM	#3
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 129	Keith, I am meeting a guy from Kentucky in Illinois over Memorial Day Weekend. If you would consider driving up to Galva, IL to meet me we might be able to work something out. __________________ "I got it one piece at a time and it didn't cost me a dime..."

01-22-2003, 08:36 PM	#4
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 129	Currently I have a sale pending on: 63 GMC cab automatic column & related parts from the 66 GMC inner fenders and front end sheet metal from the 65 Chevy cab __________________ "I got it one piece at a time and it didn't cost me a dime..."

02-18-2003, 06:19 PM	#5
GMCRescue Registered User Join Date: Feb 2003 Location: Santa Barbara, CA Posts: 4	Got Parts? Hi friend, Just wondering if your still parting out your '66. I'm looking for compatible front end body parts for my '65 GMC. Thanks __________________ The greeedy BMW drivin' latte suckin' insurance company wants to total my '65 GMC. Like hell!

02-19-2003, 08:18 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,746	65 K/20 frame i'm interested in the 4x4 frame if the other person decides not to take it. please p.m. me your phone number if it's still available. thank you. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-20-2003, 08:07 PM	#7
GMCRescue Registered User Join Date: Feb 2003 Location: Santa Barbara, CA Posts: 4	Hey Jerry, Sorry to say that the Toyota 4x4 frame was pretty well tweaked, that's why it went to the scrap yard. I just about knocked the rear axle off the frame and bent the frame just behind the driver side door. I'm sorry that it all happened but glad nobody got hurt. (BTW - for the benefit of the curious souls among us, it was 8:30 AM on a clear day and nobody was drunk at the time. It was all my fault and nobody gets to hire a lawyer!) __________________ The greeedy BMW drivin' latte suckin' insurance company wants to total my '65 GMC. Like hell!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.