The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-05-2022, 08:54 PM   #1
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
How to adjust the idle vent valve (B carb)?

Yesterday, while trying to deal with my truck that was bogging/stalling, I had minimal tools, and in my panic mode, I put a few random turns on the idle vent valve. Then random the other way. I had previously rebuilt this carb, and the truck ran perfectly. I've now remembered/researched what this valve does, but can't find how to get it back into adjustment.

What's the correct procedure for setting the idle vent valve?

jayoldschool is offline   Reply With Quote
Old 06-07-2022, 01:17 PM   #2
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
Re: How to adjust the idle vent valve (B carb)?

Nobody remembers how to adjust the idle vent?
jayoldschool is offline   Reply With Quote
Old 06-07-2022, 02:07 PM   #3
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: How to adjust the idle vent valve (B carb)?

Some info here - http://67-72chevytrucks.com/vboard/s...d.php?t=679308
The Rocknrod is offline   Reply With Quote
Old 06-07-2022, 02:50 PM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,494
Re: How to adjust the idle vent valve (B carb)?

Is it a mono jet or model b?
geezer#99 is online now   Reply With Quote
Old 06-07-2022, 07:09 PM   #5
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
Re: How to adjust the idle vent valve (B carb)?

B, manual choke. I must have known how to set it when I rebuilt it... but that was a few carbs ago. I'll check that link and BRB.

Ok, yes, I'd read that one already. No idle vent info in there. At this point, I will just go with "make sure it's open at idle and closed with any throttle application".

But I'm open to suggestions/experience!

Best info I can find:

Quote:
Idle Vent Valve:

Most carburetors today will use a movable atmospheric idle vent valve in place of the fixed external vent system. This movable valve will be held in an open position only during idle and park positions by carburetor linkage contacting the idle vent arm. Any tendency for fuel vapors to collect inside the float bowl will be vented to atmos*phere through this opening at idle and park positions. As car speed increases and throttle linkage is progressively opened, the actuating lever from the linkage will no longer contact the idle vent arm thereby allowing the idle vent valve to close. This action will now return the carburetor to the internal vent system thereby once again maintaining the same pressure on top of the fuel as entering the carburetor through the air cleaner.

It is important that the idle vent valve be closed during all periods of operation except at idle, otherwise excessive richness can be caused by the higher atmospheric pressure acting upon the fuel in the float bowl.
SOURCE

Last edited by jayoldschool; 06-07-2022 at 07:16 PM.
jayoldschool is offline   Reply With Quote
Old 06-07-2022, 08:27 PM   #6
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,494
Re: How to adjust the idle vent valve (B carb)?

Found this for you.
Down a bunch of pages (page 43)you’ll find the setting info and a bit further down you’’lol find the specs.



https://www.carburetor-parts.com/ass...r-b-manual.pdf
geezer#99 is online now   Reply With Quote
Old 06-08-2022, 11:01 AM   #7
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,148
Re: How to adjust the idle vent valve (B carb)?

Great info, thank you!

3/64-1/16 from top of carb to bottom of screw at idle. Time to find my feeler gauges...



jayoldschool is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com