700r4 to 205

[Johnl48]

Doing a 4spd to 700r4 conversion. Guy at advanced adapter s told me I just needed the tail shaft changed, which I did, and it will bolt right to the 4spd adapter...guess what.. it doesn't, the bolt pattern is totally different and the hub they provided is too deep What am I missing ?

70 c20 350

[kwmech]

You need a factory T350 to 205 adapter. I may have a couple of them hidden in a box somewhere

[Johnl48]

Originally Posted by kwmech

You need a factory T350 to 205 adapter. I may have a couple of them hidden in a box somewhere

I'm glad they told me it will fit on the 4spd adapter. Please let me know if you have one I'm stuck here

Thank you

[Johnl48]

Found one local thank you

[57taskforce]

The th350 and 465 205’s use different case input shafts and transmission output shafts as well. 10 spline course input and output on the 465 and 27 spline fine on the 350 if memory serves me. I believe there is a conversion coupler made that will make this swap work….
Here’s said coupler…
https://www.offroaddesign.com/drive-...10-spline.html

[Johnl48]

Originally Posted by 57taskforce

The th350 and 465 205’s use different case input shafts and transmission output shafts as well. 10 spline course input and output on the 465 and 27 spline fine on the 350 if memory serves me. I believe there is a conversion coupler made that will make this swap work….
Here’s said coupler…
https://www.offroaddesign.com/drive-...10-spline.html

Correct. I have that and new tail shaft is in transmission already

[kwmech]

Originally Posted by Johnl48

Found one local thank you

Couldn't find mine, glad you found one