The Right Stuff 71-72 Disc brake line kit help

[SoCoC10]

Just got a part # TKT7204 brake line kit and I noticed the tags have letters on them. Anyone made a list of where each line goes?
Amazes me that there isn’t a simple list of them with location descriptions or a diagram. Any help would be appreciated.

TMC7101A master cylinder to proportioning block rear
TMC7101B master cylinder to proportioning block front
TKT7204A master cylinder to front brake T
TKT7204B front brake T to left front
TKT7204C front brake T to right front
TKT7204D master cylinder to rear brake junction
TKT7204E rear brake junction to rear junction

[Spf79]

I purchased this same kit, and I had the same frustration. it would be so easy for them to label the pieces. I ended up just comparing what was pulled off of the truck to what I had in the box, it was pretty self explanatory after doing some comparisons. I never thought to look if I could purchase single brake lines, if that is the case... the TK#'s may be labelled as to where they go on the manufacture's website???

FYI - my rear axle lines did not fit well, I had to manipulate them quite a bit in order to get the fitment I wanted. I read a couple other reviews and it was also fairly common that the front lines coming across the back of the crossbar of the frame needed some help. I had a 73+ front crossbar, so I was hosed regardless.

Good luck, I hope it goes smooth for you. I have a fair amount of pictures in my build thread of the brake line install on a bare frame around post #40... and after. It might help?

[SoCoC10]

I’ve updated this with what I believe is correct. Lines with protective spring wrap are closest to the master cylinder.