The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-24-2015, 05:24 AM   #1
firedog
Registered User
 
firedog's Avatar
 
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
My story on how I got involved in these trucks

I am typing this due to the one that got me going with the trucks has suffered a stroke and has lost all movement on his left side. A healthy 60 year old man enjoying his retirement from the military on his measly military pension.

I didnt get a lot of time with my father growing up. He was a career Army Helicopter mechanic. The one summer we attempted to spend together was inturrepted by training for Desert Storm. Thru all these times there was the one constant a Blue and White 1969 Chevy Long Bed. That truck seen many miles between Fort Campbell Kentucky and Missouri and then later between Fort Hood Texas and Missouri. Fort Hood Texas almost ended the life of that old truck when it was broadsided in an intersection. Pushing the bed side in and pushing the rear end almost to where the tire was rubbing the frame. At the same time that this occured my father was retiring from the Army and headed to Korea to work a civilian job. Prior to him leaving the truck was fixed up and fresh paint put on it. The truck set in the garage for 10 years after that.

I graduated high school, entered the real world of work, kids, divorce, and all those adult things you do. But all our conversations always evolved around his truck or the truck that I had bought.
Name:  trkpics%20005a.jpg
Views: 981
Size:  70.8 KB
Name:  DSC00755.JPG
Views: 956
Size:  45.2 KB

When my father decided to return to the states he purchased a small lot and built a big garage. The next year i started the process of tearing down my truck for my first attempt at a restore and my dad purchased a 71 gmc and 2 pickup truck loads of parts. So that fall and winter we built not 1 truck but we built 2 trucks in the same garage at the same time. Picking thru the stache of parts. Both trucks were completed along with my grandfather building a 1970 4x4 out of our left overs as well during the same time period.
Name:  trkpics%20009a.jpg
Views: 955
Size:  59.4 KB

We have had many trips to meet many people on the board, we were at the National Board Meet in Norwood, MO when my engine blew, we went to Kirksville, MO to a midwest meet when I lost my tranny, we have taken 2 trips to the Midwest All Truck Nationals in Kansas City, and the awesome trip to Paris TN for another National Board Meet where it rained most of the way. We have met great people along the way at swap meets and just thru the board. Which led to the most recent project a 1967 Chevy Short bed we bought from Tycoon4u. This truck is awaiting the engine install and a tranny along with interior.
Name:  IMG_0531%20(640x480).jpg
Views: 954
Size:  56.9 KB
So this is my story of how I got involved into these trucks. Everyone, remember the moments you spend with your loved ones, even if you are on your back laying in a puddle of tranny fluid. You never know when you might have that oppurtunity taken away from you.
__________________
*SOLD*
1968 Chevy SWB Fleet
350/350 combo
Tach/tilt/buddy buckets
Bagged/18" Wheels
Black on Black


Project "Pandemic" the Farm Rat
1927 Chevy Capitol Truck Rat rod
'30 Model A Frame
Dual Carb 5.3 LS
http://www.67-72chevytrucks.com/vboa...d.php?t=804162

2007 GMC 4 DOOR 2WD
BUILT 5.3 STAGE 3 CAM 93 TUNE
LIFTED 22X12 WHEELS 33" TIRES

2023 Jeep RENEGADE
Wifes ride
firedog is offline   Reply With Quote
Old 02-24-2015, 07:50 AM   #2
yuccales
Registered User
 
yuccales's Avatar
 
Join Date: May 2011
Location: Northern Calif.
Posts: 3,587
Re: My story on how I got involved in these trucks

Well done!
yuccales is offline   Reply With Quote
Old 02-24-2015, 07:57 AM   #3
don t. - 72gmc
Registered User
 
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 389
Re: My story on how I got involved in these trucks

Please thank your father for his service to our country.

My dad was all thumbs when it came to mechanics.
No money and a decent FIL got me involved in shade tree repairs, to keep my DD on the road.
Christmas day, 1980 was cold and windy. FIL and I worked on my 65 Dodge van distributor. Ended up dropping one of them little mucking screws down the dizzy hole, buttoned her up, and you can guess at the rest of the story.
A warm summer day, middle son (8yo) and I working on my 70 Chevy station wagon front end. Kid had grease up to his elbows, and one of the biggest smiles I can ever recall. His ma was none to happy.

Thanks for the memories....don t. ...
don t. - 72gmc is offline   Reply With Quote
Old 02-24-2015, 09:51 AM   #4
specialtyretail
So,, what else you got???
 
specialtyretail's Avatar
 
Join Date: May 2010
Location: Jackson, Mo
Posts: 18,637
Re: My story on how I got involved in these trucks

Tell your Dad we said hey and to get better soon, we have swap meets to go to. Keep us posted on how he is doing. Fred.
__________________
Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks....
Sorry, we CANNOT ship larger parts. Thanks.
specialtyretail is offline   Reply With Quote
Old 02-24-2015, 12:22 PM   #5
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,327
Re: My story on how I got involved in these trucks

-
The wife and I have met and talked to Firedog and Sammy two or three times at the All Truck Nationals in Riverside, Missouri. Great people that love these trucks. You tell your dad that all of his buddy's here on the truck board wish him well and are hoping for a full recovery.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 02-24-2015, 05:48 PM   #6
srvivor71
Registered User
 
srvivor71's Avatar
 
Join Date: Sep 2010
Location: Sullivan County, NY
Posts: 455
Re: My story on how I got involved in these trucks

Thanks for sharing that great story! I wish your father well and hope he has a speedy recovery.
srvivor71 is offline   Reply With Quote
Old 02-24-2015, 06:00 PM   #7
WarMonger
Registered User
 
WarMonger's Avatar
 
Join Date: Jan 2015
Location: Ventura, CA
Posts: 818
Re: My story on how I got involved in these trucks

sounds like your dad did some time with the 101 screaming eagles
WarMonger is offline   Reply With Quote
Old 02-24-2015, 07:05 PM   #8
Dustmaker65
Senior Member
 
Dustmaker65's Avatar
 
Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
Re: My story on how I got involved in these trucks

I, too have great memories with my Dad doing the same...Thanks for sharing, and hope he gets better.
__________________
Jimmy Hoelzel
Dustmaker65 is offline   Reply With Quote
Old 02-24-2015, 07:32 PM   #9
Bladeboy1998
Registered User
 
Join Date: Nov 2014
Location: Toledo Ohio
Posts: 520
Re: My story on how I got involved in these trucks

Awesome! I wish I had a fond memory of my dad, he was just a not nice person. I'm sorry to hear he is ill, best of luck and hope he gets better.
Bladeboy1998 is offline   Reply With Quote
Old 02-24-2015, 08:22 PM   #10
firedog
Registered User
 
firedog's Avatar
 
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
Re: My story on how I got involved in these trucks

Thanks everyone for all the well wishes and prayers, he was moved today about 45mins closer to home for in hospitial rehabilitation.

His biggest complaint recently is about the thickening agent they have to put into his drinks to make them the consistentcey of syrup. He says coffee is not suppose to be that thick. He also says the nurses are ugly.
__________________
*SOLD*
1968 Chevy SWB Fleet
350/350 combo
Tach/tilt/buddy buckets
Bagged/18" Wheels
Black on Black


Project "Pandemic" the Farm Rat
1927 Chevy Capitol Truck Rat rod
'30 Model A Frame
Dual Carb 5.3 LS
http://www.67-72chevytrucks.com/vboa...d.php?t=804162

2007 GMC 4 DOOR 2WD
BUILT 5.3 STAGE 3 CAM 93 TUNE
LIFTED 22X12 WHEELS 33" TIRES

2023 Jeep RENEGADE
Wifes ride
firedog is offline   Reply With Quote
Old 02-24-2015, 08:34 PM   #11
J & E Speed Center
Registered User
 
J & E Speed Center's Avatar
 
Join Date: Jan 2015
Location: Remsen, IA
Posts: 33
Re: My story on how I got involved in these trucks

Thsts an awesome story. I was born in 1963 and my first truck memory was around 1968 when my Dad had a 1964 C20 longbed. We had an 8 1/2 foot camper for it and spent many many trips to the Colorado River and the beach with that truck. My dad had big over sized Goodyear tires on it. I remember he would take those little paint jars you buy for painting model cars with and he would fill in the Goodyear logo with gold paint. I also remember the truck had a lever under the dash that he would pull out to put it in overdrive going across the desert. Very fond memories of Needles (river), Lake Elsinore and Doheny beach. When I turned 15 I learned to drive in a 1969 C20 Longhorn, it had the big 10" US Mags with I think 16.5 big tires on it it was real cool looking, light green with a white top. I've had so many chevy trucks I can't even list them all. Now I'm building memories with my son we are building a 64 c10 big back window fleet side layed out on air and we have a 69 c10 LWB as a driver till the 64 is done. Once the 64 is done we are cutting the 69 down to a shortbed. Can't wait to get that one started.
Attached Images
   
J & E Speed Center is offline   Reply With Quote
Old 02-24-2015, 08:37 PM   #12
Bladeboy1998
Registered User
 
Join Date: Nov 2014
Location: Toledo Ohio
Posts: 520
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
Thanks everyone for all the well wishes and prayers, he was moved today about 45mins closer to home for in hospitial rehabilitation.

His biggest complaint recently is about the thickening agent they have to put into his drinks to make them the consistentcey of syrup. He says coffee is not suppose to be that thick. He also says the nurses are ugly.
Sounds like a stubborn one! Lol
Bladeboy1998 is offline   Reply With Quote
Old 02-25-2015, 01:37 AM   #13
Sklptrljay
Registered User
 
Sklptrljay's Avatar
 
Join Date: Apr 2012
Location: Stillwater, Oklahoma
Posts: 874
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
Thanks everyone for all the well wishes and prayers, he was moved today about 45mins closer to home for in hospitial rehabilitation.

His biggest complaint recently is about the thickening agent they have to put into his drinks to make them the consistentcey of syrup. He says coffee is not suppose to be that thick. He also says the nurses are ugly.

See next post
__________________
1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list.

1972 GMC 4X4 K1500 Survivor - Sold

No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy
Sklptrljay is offline   Reply With Quote
Old 02-25-2015, 01:40 AM   #14
Sklptrljay
Registered User
 
Sklptrljay's Avatar
 
Join Date: Apr 2012
Location: Stillwater, Oklahoma
Posts: 874
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
Thanks everyone for all the well wishes and prayers, he was moved today about 45mins closer to home for in hospitial rehabilitation.

His biggest complaint recently is about the thickening agent they have to put into his drinks to make them the consistentcey of syrup. He says coffee is not suppose to be that thick. He also says the nurses are ugly.

Hope this helps.
Attached Images
 
__________________
1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list.

1972 GMC 4X4 K1500 Survivor - Sold

No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy
Sklptrljay is offline   Reply With Quote
Old 02-25-2015, 02:17 PM   #15
cooperhw
Registered User
 
cooperhw's Avatar
 
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,302
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by Dustmaker65 View Post
I, too have great memories with my Dad doing the same...Thanks for sharing, and hope he gets better.
X3

Me too. best memories of my dad centered around cars/trucks. I used to be stumped and "wanted him to fix it". He would look at it and tell me to start at the beginning (again) and walk through it and that I'll get it". Try this,,,,

Cherish every minute you have left. Tell him "even guys who don't know him are sending out a shout out to get well soon and get ur butt back in that truck where it belongs" and quit harassing them ugly nurses.
__________________
"Life is too short to drive a boring vehicle".
Later,
Wayne
cooperhw is offline   Reply With Quote
Old 02-25-2015, 02:53 PM   #16
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: My story on how I got involved in these trucks

Firedog I hope your dad gets better soon! I almost lost my dad about 5 years ago when he was cutting up a junk car and the fuel tank exploded. He's made a full recovery, but was in the hospital for a few weeks and had to have skin grafts on his hands. Thank God he decided to start practicing safety. He was wearing a full face shield and gun mufflers so he didn't burn his lungs or lose his hearing. It was hard being 700 miles away. I was on my way home just a couple hours after it happened.

J & E Speed Center, Please use a respirator when painting. A dust mask does absolutely nothing to stop the organic chemicals like isocyanates that can cause cancer and other serious lung problems that can shorten or make your life difficult in your later years. At a minimum at least use cheap 3M organic vapor masks from lowes, etc. They're good for one or two spray jobs then you can just buy new canisters.
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 02-28-2015, 07:30 AM   #17
firedog
Registered User
 
firedog's Avatar
 
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
Re: My story on how I got involved in these trucks

Keep the thoughts and prayers coming he is getting frustrated at being in a hospital
__________________
*SOLD*
1968 Chevy SWB Fleet
350/350 combo
Tach/tilt/buddy buckets
Bagged/18" Wheels
Black on Black


Project "Pandemic" the Farm Rat
1927 Chevy Capitol Truck Rat rod
'30 Model A Frame
Dual Carb 5.3 LS
http://www.67-72chevytrucks.com/vboa...d.php?t=804162

2007 GMC 4 DOOR 2WD
BUILT 5.3 STAGE 3 CAM 93 TUNE
LIFTED 22X12 WHEELS 33" TIRES

2023 Jeep RENEGADE
Wifes ride
firedog is offline   Reply With Quote
Old 02-28-2015, 07:56 AM   #18
BRL
Registered User
 
BRL's Avatar
 
Join Date: Jun 2014
Location: Tahuya WA
Posts: 510
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by srvivor71 View Post
Thanks for sharing that great story! I wish your father well and hope he has a speedy recovery.
Ditto!
BRL is offline   Reply With Quote
Old 02-28-2015, 03:18 PM   #19
68shortwide
Registered User
 
68shortwide's Avatar
 
Join Date: Jul 2014
Location: Missouri
Posts: 1,427
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
Keep the thoughts and prayers coming he is getting frustrated at being in a hospital
Sounds like my grandpa when he had a mild stroke back in September lol he tried to check himself out more than a few times over a 3week span. Give em hell Sammy!
__________________
Jack
Personal Fleet: Family Fleet:
1955.5 Panel 1959 Apache
1968 ShortWide
1969 ShortStep
68shortwide is offline   Reply With Quote
Old 03-01-2015, 12:28 AM   #20
firedog
Registered User
 
firedog's Avatar
 
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
Re: My story on how I got involved in these trucks

We were planning a midwest get together on May 30th, it looks like we are going to still push thru and have this, if Sammy has to ride on his back to get there we are going forward with it still.
__________________
*SOLD*
1968 Chevy SWB Fleet
350/350 combo
Tach/tilt/buddy buckets
Bagged/18" Wheels
Black on Black


Project "Pandemic" the Farm Rat
1927 Chevy Capitol Truck Rat rod
'30 Model A Frame
Dual Carb 5.3 LS
http://www.67-72chevytrucks.com/vboa...d.php?t=804162

2007 GMC 4 DOOR 2WD
BUILT 5.3 STAGE 3 CAM 93 TUNE
LIFTED 22X12 WHEELS 33" TIRES

2023 Jeep RENEGADE
Wifes ride
firedog is offline   Reply With Quote
Old 03-01-2015, 12:29 PM   #21
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,327
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
We were planning a midwest get together on May 30th, it looks like we are going to still push thru and have this, if Sammy has to ride on his back to get there we are going forward with it still.

Sounds good Mike. I have it back on the calendar.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-14-2024, 05:36 PM   #22
firedog
Registered User
 
firedog's Avatar
 
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
Re: My story on how I got involved in these trucks

Today brings a sad end, my dad Sammy, passed away. I Will not be giving up on the trucks, just won't have him to help with them.
__________________
*SOLD*
1968 Chevy SWB Fleet
350/350 combo
Tach/tilt/buddy buckets
Bagged/18" Wheels
Black on Black


Project "Pandemic" the Farm Rat
1927 Chevy Capitol Truck Rat rod
'30 Model A Frame
Dual Carb 5.3 LS
http://www.67-72chevytrucks.com/vboa...d.php?t=804162

2007 GMC 4 DOOR 2WD
BUILT 5.3 STAGE 3 CAM 93 TUNE
LIFTED 22X12 WHEELS 33" TIRES

2023 Jeep RENEGADE
Wifes ride
firedog is offline   Reply With Quote
Old 01-14-2024, 06:03 PM   #23
LockDoc
The Older Generation

 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,327
Re: My story on how I got involved in these trucks

Quote:
Originally Posted by firedog View Post
Today brings a sad end, my dad Sammy, passed away. I Will not be giving up on the trucks, just won't have him to help with them.

So sorry to hear that Mike. He was a good guy and I always enjoyed visiting with him. Best wishes to you and all of the family.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 01-15-2024, 08:25 AM   #24
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,863
Re: My story on how I got involved in these trucks

I offer my condolences for your loss. I've never met you all but I got a good feel for the kind of people he was, and you, from reading through this thread. Yesterday marked the 20th year since my dad passed away. He was a WW2 veteran
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 01-15-2024, 11:22 AM   #25
Dashman
Junior Member
 
Join Date: Apr 2021
Location: Santa Cruz, NM
Posts: 49
Re: My story on how I got involved in these trucks

Sorry to hear about your father. It seems a lot of years went by that he may have been suffering through. That must have been rough on both of you. My father passed away at 99 and 10 months in April of '22, and now I take care of my Mom who just turned 99 in November. It's a life sacrifice unlike having growing children because it's a regression that only gets harder. I do it for all that they did for me while I was growing up. It sounds like you did too.
Dashman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com