71 buckets and console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2003 silverado · 01-11-2012, 10:52 AM

will be parting this soon and trying to get numbers

duallyjams · 01-11-2012, 05:29 PM

A lot of buckets get sold on here , did you try doing a search to see what the price range is.
1) it will make a huge difference if you are willing to ship verses picked up in person
2) the seat foam needs to be replaced ( 300-400 ) for the buyer to consider
3) is the frame in good condition ( there was a set that the frame needed work - got no interest )
4) completely rebuilt and ready to go 1,000 to 1,500
5) need to be completely rebuilt 200 to 400
this is just my opinion only

PT'S 70 CST · 01-11-2012, 06:09 PM

Duallyjams price is very close. By time you buy foam, covers and if the frames skirts need any work you will have a good bit in the parts to restore them. You would be better off selling the console separate from the seats.

PT

2003 silverado · 01-11-2012, 07:32 PM

what would just the seats bring and then the console the brackets are good on the seats . Thanks for your advise

rlk · 02-07-2012, 05:37 PM

I would be intrested in steering wheel depending on the condition and price

rlk · 02-07-2012, 05:42 PM

never mind i forgot this what its worth, sorry

VA72C10 · 02-07-2012, 05:51 PM

Console if no cracks/major wear/good ring/tray/plate I'd say 100-150 (depending on condition of parts listed)
Seats with that amount of foam work needed probably 250-350 with the brackets. Brackets are worth 150 of that...But I've seen seat pairs sell for closer to 500 needing that much work so it doesn't hurt to start at that point. Will run about $85 to ship them including the cost of the box (u-haul wardrobe box)

2003 silverado · 02-09-2012, 12:52 PM

Thanks I may look into a trade with them?

01-11-2012, 10:52 AM	#1
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	71 buckets and console will be parting this soon and trying to get numbers Attached Images __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

01-11-2012, 05:29 PM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 71 buckets and console A lot of buckets get sold on here , did you try doing a search to see what the price range is. 1) it will make a huge difference if you are willing to ship verses picked up in person 2) the seat foam needs to be replaced ( 300-400 ) for the buyer to consider 3) is the frame in good condition ( there was a set that the frame needed work - got no interest ) 4) completely rebuilt and ready to go 1,000 to 1,500 5) need to be completely rebuilt 200 to 400 this is just my opinion only __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-11-2012, 06:09 PM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: 71 buckets and console Duallyjams price is very close. By time you buy foam, covers and if the frames skirts need any work you will have a good bit in the parts to restore them. You would be better off selling the console separate from the seats. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-11-2012, 07:32 PM	#4
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 71 buckets and console what would just the seats bring and then the console the brackets are good on the seats . Thanks for your advise __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

02-07-2012, 05:37 PM	#5
rlk Registered User Join Date: Sep 2011 Location: quarryville pa Posts: 57	Re: 71 buckets and console I would be intrested in steering wheel depending on the condition and price

02-07-2012, 05:42 PM	#6
rlk Registered User Join Date: Sep 2011 Location: quarryville pa Posts: 57	Re: 71 buckets and console never mind i forgot this what its worth, sorry

02-07-2012, 05:51 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71 buckets and console Console if no cracks/major wear/good ring/tray/plate I'd say 100-150 (depending on condition of parts listed) Seats with that amount of foam work needed probably 250-350 with the brackets. Brackets are worth 150 of that...But I've seen seat pairs sell for closer to 500 needing that much work so it doesn't hurt to start at that point. Will run about $85 to ship them including the cost of the box (u-haul wardrobe box) __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-09-2012, 12:52 PM	#8
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 71 buckets and console Thanks I may look into a trade with them? __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.