Intellitronix printed circuit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 11-24-2021, 11:00 AM

Does anyone have experience with these? I see lots of bad experiences with their digital dashes, but nothing about the PCBs. They say "made in usa with lifetime warranty".

Peanut74 · 11-24-2021, 10:17 PM

I have bought one and have done the dash wiring side. That portion was not bad. I have not yet installed the gauge package itself yet. Hoping to do that in the coming months if everything works out as planned.

**kev2809** · 11-25-2021, 08:16 AM

I don't have one but was wondering the same thing. they are like half or a third of the price of the major brand out there. I just wish they had a needle gauge avaliable. I HATE the numbers constantly moving while driving. my aunt had a grand prix about 20 years ago with a digital speedo and I couldn't do it

**70STOVEBOLT** · 11-25-2021, 09:18 AM

I am asking about their printed circuit, not the entire cluster. I ordered one so I will see if it’s good or not.

**kev2809** · 11-25-2021, 11:30 AM

ohhh didnt even realize they make a printed circuit for the stock clusters

**70STOVEBOLT** · 11-25-2021, 11:39 AM

They are half the cost, or less, than most vendors. eBay link below

https://www.ebay.com/itm/30283796069...OSwFXNZckCHare

**70STOVEBOLT** · 11-29-2021, 02:43 PM

I received the printed circuit today. I have not installed it yet, but one thing I did notice is that it is paper thin. I will report back once it is installed, hopefully this week sometime.

**kev2809** · 11-29-2021, 03:23 PM

there were only 2 reviews from that link I think and neither were good.

hope it works out

**70STOVEBOLT** · 11-29-2021, 03:44 PM

Quote:

Originally Posted by kev2809

there were only 2 reviews from that link I think and neither were good.

hope it works out

I saw those. I confirmed everything lines up by laying it on top of the original, so that should not be an issue. If it fails I will try to repair the original. It has a broken circuit in the cluster feed connection area, one of the paths for the fuel gauge is broken. I found some threads on here that discuss repairing the broken paths, so I may try that anyway to see if I can fix it.

**lks dcvn** · 12-27-2021, 01:45 PM

Used them a few times - no issues. Yes - they are flimsy plastic compared to the originals. I swapped over to LED bulbs when I used these and have had zero issues.

I haven't removed these from the truck since I installed them so unsure of long term wear/tear around the dash cluster harness connection - that may be the only concern I would have down the road.

**70STOVEBOLT** · 12-27-2021, 06:08 PM

I used LEDs also. Had to remove the dash after install to fix a sticky tach needle, and the circuit is still working.

11-24-2021, 11:00 AM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Intellitronix printed circuit Does anyone have experience with these? I see lots of bad experiences with their digital dashes, but nothing about the PCBs. They say "made in usa with lifetime warranty". __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

11-24-2021, 10:17 PM	#2
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: Intellitronix printed circuit I have bought one and have done the dash wiring side. That portion was not bad. I have not yet installed the gauge package itself yet. Hoping to do that in the coming months if everything works out as planned. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)

11-25-2021, 08:16 AM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Intellitronix printed circuit I don't have one but was wondering the same thing. they are like half or a third of the price of the major brand out there. I just wish they had a needle gauge avaliable. I HATE the numbers constantly moving while driving. my aunt had a grand prix about 20 years ago with a digital speedo and I couldn't do it __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-25-2021, 09:18 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Intellitronix printed circuit I am asking about their printed circuit, not the entire cluster. I ordered one so I will see if it’s good or not. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

11-25-2021, 11:30 AM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Intellitronix printed circuit ohhh didnt even realize they make a printed circuit for the stock clusters __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-25-2021, 11:39 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Intellitronix printed circuit They are half the cost, or less, than most vendors. eBay link below https://www.ebay.com/itm/30283796069...OSwFXNZckCHare __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

11-29-2021, 02:43 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Intellitronix printed circuit I received the printed circuit today. I have not installed it yet, but one thing I did notice is that it is paper thin. I will report back once it is installed, hopefully this week sometime. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

11-29-2021, 03:23 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Intellitronix printed circuit there were only 2 reviews from that link I think and neither were good. hope it works out __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-27-2021, 01:45 PM	#10
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: Intellitronix printed circuit Used them a few times - no issues. Yes - they are flimsy plastic compared to the originals. I swapped over to LED bulbs when I used these and have had zero issues. I haven't removed these from the truck since I installed them so unsure of long term wear/tear around the dash cluster harness connection - that may be the only concern I would have down the road.

12-27-2021, 06:08 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,208	Re: Intellitronix printed circuit I used LEDs also. Had to remove the dash after install to fix a sticky tach needle, and the circuit is still working. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.