Favorite tool you own? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jitteryguy · 10-17-2010, 08:52 AM

die grinder ! I have 5 diiferant ones and a ton of atachments for em, I use at least on one most every project I do . 4.5 angle grinder is a close second

JuicyJ · 10-17-2010, 12:53 PM

My 1/2 inch drive snap on ratchet with screw driver handle and my gear wrench ratcheting wrenches.

NONHOG · 10-17-2010, 05:10 PM

Today ? within the hour ? My propane torch and my HF pad "foam creeper"
Tomorrow ? Who knows

Sillyoldman · 10-17-2010, 07:21 PM

Quote:

Originally Posted by NONHOG

Today ? within the hour ? My propane torch and my HF pad "foam creeper"
Tomorrow ? Who knows

I love my foam creeper. I bought mine only after using yours. Great tool and it's not broken yet.

NONHOG · 10-17-2010, 11:59 PM

Quote:

Originally Posted by Sillyoldman

I love my foam creeper. I bought mine only after using yours. Great tool and it's not broken yet.

Not getting any younger are we?

Later today my fav was the good ol' Vise Grips !

ERASER5 · 10-19-2010, 03:41 AM

My new favorite got-to-have-it tool!

TORK-GRIP

The Ultimate Torque Wrench

Note: Conventional torque wrenches only work with expensive socket wrenches, and usually only with one size of those. Not so with the new TORK-GRIP Universal Torque Wrench!

This tool is complete all by itself, and will attach firmly to any non-recessed fastener, nut or bolt.

Compatible With All Of Your Existing Fastener Tools!
For recessed fasteners, such as recessed crank bolts, Allen bolts of all sorts, Phillips and slotted-head screws, the TORK-GRIP Universal Torque Wrench can grab onto any 1/4", 3/8", 1/2" or even 3/4" drive socket, any Allen wrench, or any screwdriver-type handle!

TORK-GRIP Universal Torque Wrench

An Indispensible Tool for All Repairs

It is well known that it is absolutely impossible to do any repair more complicated than an oil change without a torque wrench.

Unfortunately, the old-fashioned torque wrenches available in the past have been useless by themselves, requiring an expensive set of ratchet socket wrenches to make them work. Not so with the revolutionary TORK-GRIP Universal Torque Wrench! Fully compatible with S.A.E., Metric, Whitworth systems!

"Real World" ® Calibrations!

Not visible on the prototype shown in the photo, the TORK-GRIP Universal Torque Wrench features the Real World ® calibration system!

Old-fashioned torque wrenches from our pitiful competitors are calibrated in meaningless numbers. The TORK-GRIP Universal Torque Wrench, however is clearly marked in easily understandable calibration marks instead:

Inertial Impact Alignment Tool

Works as an inertial impact alignment tool (also known as a "hammer"), too! The TORK-GRIP Universal Torque Wrench is a solid, hefty tool, and can serve as a hammer in case of need. If the bulk of the tool itself isn't sufficient for your hammering needs, you can clamp any heavy metal object into its powerful curved jaws to increase its heft and hitting power!

Great for Self Defense Too!

The TORK-GRIP Universal Torque Wrench is also extremely useful in medium-duty hand-to-hand combat, due to its superior reach and ruggedness. You can even clamp a knife blade into the jaws when needed for that extra "edge" over your opponent.

irishman999 · 10-19-2010, 06:10 AM

HAHAHA ^^

Its so simple! Why is this just developed?!?

Squareforceone · 07-23-2011, 11:50 PM

Quote:

Originally Posted by irishman999

I cant believe no one said leatherman yet. I keep one in my pocket, saved my ass plenty of times. Especially being a commercial dump truck driver, things shake loose, sometimes you need a knife or screwdriver.

x2... hundred

ETsC10 · 07-24-2011, 12:40 AM

Quote:

Originally Posted by ERASER5

My new favorite got-to-have-it tool!

THAT is the funniest thing I've seen for ages!

I WANT ONE !!!

camshaftgsxr · 08-06-2011, 10:20 PM

my dad

VegasBruce · 08-07-2011, 12:23 AM

Its been fixed once or twice.

BMERDOC · 08-07-2011, 12:27 AM

I have an IR231 1/2" impact I bought when I started at BMW 15 years ago. It still breaks loose bolts for the new kids when their composite guns just won't do. A little piece of me is gonna die when it finally kicks the can!

fastwillie 696969 · 08-07-2011, 01:34 AM

my brain

71swb4x4 · 08-07-2011, 01:59 AM

http://67-72chevytrucks.com/vboard/index.php

Monty · 08-07-2011, 09:05 AM

Quote:

Originally Posted by JuicyJ

My 1/2 inch drive snap on ratchet with screw driver handle and my gear wrench ratcheting wrenches.

my 9/16" GearWrench flex headed combination wrench is the most used tool in my collection.

oldblue1968chevy · 08-14-2011, 11:57 PM

vice grips my gfs dad calls me the vice grip man lol i have a teeny pair that i carry

71/454 · 08-15-2011, 03:24 AM

Bandsaw. No need to get out the grinder anymore to make a tab or trim something.

dragginmetal · 08-15-2011, 11:22 AM

Water hose... Don't have to spend $ at the car wash. Easier than pouring a bucket of water at a time on your truck.

wilbilt · 08-15-2011, 06:22 PM

My "little friend"...

camshaftgsxr · 08-15-2011, 07:02 PM

everlast 100lb bag hanging a foot from the support wall with two ratchet straps and 4 grade 8 bolts holding it in place.... it keeps me from hitting the truck

some times

gearheads78 · 08-15-2011, 07:23 PM

Telescopic magnet with my mig welder a close second.

dwcsr · 08-16-2011, 06:53 PM

I'm not sure if its my favorite but it does save me the most work when I remove king pins

VegasBruce · 08-16-2011, 07:12 PM

Quote:

Originally Posted by camshaftgsxr

everlast 100lb bag hanging a foot from the support wall with two ratchet straps and 4 grade 8 bolts holding it in place.... it keeps me from hitting the truck

some times

Just do the bodywork and spend to many hours block sanding, that will keep you from hitting your truck.

*Shane* · 08-16-2011, 07:54 PM

ERASER5 · 08-16-2011, 08:14 PM

Quote:

Originally Posted by Shane

Why I had no idea your first name was Cardholder!

10-17-2010, 08:52 AM	#76
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: Favorite tool you own? die grinder ! I have 5 diiferant ones and a ton of atachments for em, I use at least on one most every project I do . 4.5 angle grinder is a close second __________________ *Goat Lube Express, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's) Last edited by jitteryguy; 10-17-2010 at 08:54 AM. Reason: grahmer*

10-17-2010, 12:53 PM	#77
JuicyJ Registered User Join Date: Jun 2010 Location: San Antonio, Texas Posts: 123	Re: Favorite tool you own? My 1/2 inch drive snap on ratchet with screw driver handle and my gear wrench ratcheting wrenches. __________________ America is all about speed, hot nasty bad ass speed

10-17-2010, 05:10 PM	#78
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Favorite tool you own? Today ? within the hour ? My propane torch and my HF pad "foam creeper" Tomorrow ? Who knows __________________ "I feel the need for speed!"... as soon as I am done with my nap.

10-19-2010, 03:41 AM	#81
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Favorite tool you own? My new favorite got-to-have-it tool! TORK-GRIP The Ultimate Torque Wrench Note: Conventional torque wrenches only work with expensive socket wrenches, and usually only with one size of those. Not so with the new TORK-GRIP Universal Torque Wrench! This tool is complete all by itself, and will attach firmly to any non-recessed fastener, nut or bolt. Compatible With All Of Your Existing Fastener Tools! For recessed fasteners, such as recessed crank bolts, Allen bolts of all sorts, Phillips and slotted-head screws, the TORK-GRIP Universal Torque Wrench can grab onto any 1/4", 3/8", 1/2" or even 3/4" drive socket, any Allen wrench, or any screwdriver-type handle! TORK-GRIP Universal Torque Wrench An Indispensible Tool for All Repairs It is well known that it is absolutely impossible to do any repair more complicated than an oil change without a torque wrench. Unfortunately, the old-fashioned torque wrenches available in the past have been useless by themselves, requiring an expensive set of ratchet socket wrenches to make them work. Not so with the revolutionary TORK-GRIP Universal Torque Wrench! Fully compatible with S.A.E., Metric, Whitworth systems! "Real World" ® Calibrations! Not visible on the prototype shown in the photo, the TORK-GRIP Universal Torque Wrench features the Real World ® calibration system! Old-fashioned torque wrenches from our pitiful competitors are calibrated in meaningless numbers. The TORK-GRIP Universal Torque Wrench, however is clearly marked in easily understandable calibration marks instead: Inertial Impact Alignment Tool Works as an inertial impact alignment tool (also known as a "hammer"), too! The TORK-GRIP Universal Torque Wrench is a solid, hefty tool, and can serve as a hammer in case of need. If the bulk of the tool itself isn't sufficient for your hammering needs, you can clamp any heavy metal object into its powerful curved jaws to increase its heft and hitting power! Great for Self Defense Too! The TORK-GRIP Universal Torque Wrench is also extremely useful in medium-duty hand-to-hand combat, due to its superior reach and ruggedness. You can even clamp a knife blade into the jaws when needed for that extra "edge" over your opponent. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

10-19-2010, 06:10 AM	#82
irishman999 Registered User Join Date: May 2010 Location: Reno Ne-VAH-da Posts: 594	Re: Favorite tool you own? HAHAHA ^^ Its so simple! Why is this just developed?!?

08-06-2011, 10:20 PM	#85
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: Favorite tool you own? my dad __________________

08-07-2011, 12:23 AM	#86
VegasBruce Registered User Join Date: Apr 2011 Location: Just outside Sin City Posts: 239	Re: Favorite tool you own? Its been fixed once or twice. __________________ Bruce 73 Stepside, 74 Blazer, 75 1 Ton, 66 Barracuda and a 05 Electraglide DD http://i56.photobucket.com/albums/g1...Rusti192-1.jpg

08-07-2011, 12:27 AM	#87
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Favorite tool you own? I have an IR231 1/2" impact I bought when I started at BMW 15 years ago. It still breaks loose bolts for the new kids when their composite guns just won't do. A little piece of me is gonna die when it finally kicks the can! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

08-07-2011, 01:34 AM	#88
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: Favorite tool you own? my brain __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

08-07-2011, 01:59 AM	#89
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Favorite tool you own? http://67-72chevytrucks.com/vboard/index.php __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-14-2011, 11:57 PM	#91
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Favorite tool you own? vice grips my gfs dad calls me the vice grip man lol i have a teeny pair that i carry __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-15-2011, 03:24 AM	#92
71/454 Turbo Guy Join Date: Jan 2005 Location: Calgary Alberta Posts: 353	Re: Favorite tool you own? Bandsaw. No need to get out the grinder anymore to make a tab or trim something. __________________ 1972 Gmc Custom swb intercooled twin turbo 327 10.5-1 and 12 lbs of boost, Nodular iron case super t-10 4 speed with a blowproof bellhousing, 12 bolt eaton posi soon to have moser axles. 1998 Honda CR250 fully ported, case matched, milled head, vortexed carb and revalved suspension but don't forget the woody woodpecker decal kit! Things I've broken so far: 12 bolt diff saginaw 4 spd many, many pieces Aluminum case Super t-10 4 spd

08-15-2011, 11:22 AM	#93
dragginmetal here, just not logged in Join Date: Nov 2007 Location: Tx Posts: 1,011	Re: Favorite tool you own? Water hose... Don't have to spend $ at the car wash. Easier than pouring a bucket of water at a time on your truck. __________________ Mike 88 GMC "GOT BORED" several truck pics a few '88-'98 pics more pics

08-15-2011, 06:22 PM	#94
wilbilt Registered User Join Date: Aug 2011 Location: Northern California Posts: 189	Re: Favorite tool you own? My "little friend"... __________________ 1971 GMC C2500 Custom Camper - Second Owner. 350/TH350, Dana 60 Rear.

08-15-2011, 07:02 PM	#95
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: Favorite tool you own? everlast 100lb bag hanging a foot from the support wall with two ratchet straps and 4 grade 8 bolts holding it in place.... it keeps me from hitting the truck some times __________________



Register or Log In To remove these advertisements.

08-15-2011, 07:23 PM	#96
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: Favorite tool you own? Telescopic magnet with my mig welder a close second.

08-16-2011, 06:53 PM	#97
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Favorite tool you own? I'm not sure if its my favorite but it does save me the most work when I remove king pins Attached Images

08-16-2011, 07:54 PM	#99
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Favorite tool you own?

Register or Log In To remove these advertisements.