53 Surburban "Family Truckster" - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 06-14-2021, 08:08 AM

You got some lookers there checking it out. Good job Marc.

6DoF · 06-14-2021, 08:12 AM

did you put in a magnet to catch the bottle caps!?!?

but congrats on the madden cruise! she's a sweet ride

**youngrodder** · 06-14-2021, 08:22 AM

Quote:

Originally Posted by 8man

You got some lookers there checking it out. Good job Marc.

Thanks...

Quote:

Originally Posted by 6DoF

did you put in a magnet to catch the bottle caps!?!?

but congrats on the madden cruise! she's a sweet ride

Yes I did. The funny thing is I forgot to pull them off before heading down the road but the magnet is strong enough to hold them in place... My rear side glass will slide forward in the back. I think a buddy from the back (3rd row) seat might be able to open a beer from inside the truck.

Thanks
Marc

Tempest67 · 06-14-2021, 10:18 AM

That looks really cool, well done and Congrats.

enjoy

lower50's · 06-14-2021, 11:04 AM

Amazing! congrats on the first outing Austin must have loved it. Like you said most people will not know some of the mods to get it that low, but that just shows you did a great job.

**youngrodder** · 06-14-2021, 11:34 AM

Quote:

Originally Posted by Tempest67

That looks really cool, well done and Congrats.

enjoy

Thank you.

Quote:

Originally Posted by lower50's

Amazing! congrats on the first outing Austin must have loved it. Like you said most people will not know some of the mods to get it that low, but that just shows you did a great job.

Austin remarked that he really liked going to the show. It has been a couple of years. I sold my 48 2 yrs ago and with Covid this was our first car even in quite some time

Thank you
Marc

ajgriffin · 06-14-2021, 11:56 AM

NICE!

layinrocker65 · 06-14-2021, 12:01 PM

What a great combo. Really digging the color choices.

What’s wrong with the master cylinder?

NorCalGal · 06-14-2021, 12:08 PM

Oooooh my my, that turned out sweeeet! Congratulations on a job well done……..enjoy.

6DoF · 06-14-2021, 12:52 PM

lets not congratulate him too much ... it aint done yet. he could still get in there and install like bright yellow side glass and screw it all up.

**mongocanfly** · 06-14-2021, 02:10 PM

Best news I've heard all day..!!!!

**youngrodder** · 06-14-2021, 02:11 PM

Quote:

Originally Posted by ajgriffin

NICE!

Thanks

Quote:

Originally Posted by layinrocker65

What a great combo. Really digging the color choices.

What’s wrong with the master cylinder?

Much appreciated. The lid leaks and I pulled it to bench bleed (again) to help diagnose a brake issue. I did still have some air in it. The lid leaks and I hated the spring clips that hold it down. I'm going with a Wilwood. I have been in contact with their tech line and they will spec the correct bore size for the master. They are great to work with.

Quote:

Originally Posted by NorCalGal

Oooooh my my, that turned out sweeeet! Congratulations on a job well done……..enjoy.

Thank you

Quote:

Originally Posted by 6DoF

lets not congratulate him too much ... it aint done yet. he could still get in there and install like bright yellow side glass and screw it all up.

Oh man you caught me. I'm actually using that safety glass you used to see in school doors that has the metal chicken wire running thru it....hater..ha ha

Marc

layinrocker65 · 06-14-2021, 09:31 PM

Good to know. I have a very similar m/c setup and mine leaks too. Hard for me to change since my brakes work so good though.

Quote:

Originally Posted by youngrodder

Thanks

Much appreciated. The lid leaks and I pulled it to bench bleed (again) to help diagnose a brake issue. I did still have some air in it. The lid leaks and I had the spring clips that hold it down. I'm going with a Wilwood. I have been in contact with their tech line and they will spec the correct bore size for the master. They are great to work with.

Marc

**oldman3** · 06-14-2021, 11:54 PM

Marc, great job on the burb, shows with family is the best...Jim

**joedoh** · 06-15-2021, 01:11 AM

Quote:

well thats a happy pup! great outing!

Quote:

Originally Posted by 6DoF

lets not congratulate him too much ... it aint done yet. he could still get in there and install like bright yellow side glass and screw it all up.

I did yellow tint on a truck years ago, it fit the paint really well but driving it looked like someone peed on the world

**youngrodder** · 06-15-2021, 06:59 AM

Quote:

Originally Posted by layinrocker65

Good to know. I have a very similar m/c setup and mine leaks too. Hard for me to change since my brakes work so good though.

My brakes were crap so it was an easy decision. Ha ha

Quote:

Originally Posted by oldman3

Marc, great job on the burb, shows with family is the best...Jim

It was fun...Looking forward to many more. We plan on loading it up with people and driving it to GG show in Columbus, OH

Quote:

Originally Posted by joedoh

well thats a happy pup! great outing!

I did yellow tint on a truck years ago, it fit the paint really well but driving it looked like someone peed on the world

Funny the dog does not do well in car rides. He gets too nervous. I'm hoping a few rides in the suburban fixes that. It has a lot of flat floor and he can walk around much easier.

Here is a different pic since you were asking for yellow...These are are projection beam with LED lights. I'm hoping this truck has better night visibility than my last.

Marc

6DoF · 06-15-2021, 09:06 AM

Quote:

Originally Posted by youngrodder

Oh man you caught me. I'm actually using that safety glass you used to see in school doors that has the metal rebarb running thru it....hater..ha ha

Marc

Quote:

Originally Posted by youngrodder

Here is a different pic since you were asking for yellow...These are are projection beam with LED lights. I'm hoping this truck has better night visibility than my last.

Marc

seeing the yellow headlights against your paint, the yellow side tint might actually be kind of wicked ... but the chicken wire glass would really bring home that rat-rod feel

**youngrodder** · 06-17-2021, 07:17 AM

While I wait for my new Wilwood master to show up today to get my brakes sorted out, I decided to install my side rear windows...Man what a pain. Now I know why most people replace the sliding glass with one flat piece.

I hope my passengers appreciate the air flow...ha ha

2 down with 2 to go...............

Marc

6DoF · 06-17-2021, 08:47 AM

2pc for a huge win sir, worth it!

Tempest67 · 06-17-2021, 09:25 AM

putting these 'finishing touches' on is very rewarding. looks great

**youngrodder** · 06-17-2021, 09:40 AM

Quote:

Originally Posted by 6DoF

2pc for a huge win sir, worth it!

Thanks..It takes a lot of fussing around to get them to work right.

Quote:

Originally Posted by Tempest67

putting these 'finishing touches' on is very rewarding. looks great

Yes the real reward is the passenger can stick their arm out the back window to reach the bottle opener.

Marc

olcarguy · 06-17-2021, 10:59 AM

Looks freaking awesome....

**youngrodder** · 06-21-2021, 09:45 AM

Quote:

Originally Posted by olcarguy

Looks freaking awesome....

Thank you...

Marc

**youngrodder** · 06-21-2021, 09:50 AM

Here are a few more pics. I will drive the Suburban today to confirm but it looks like I fixed my brake issues. All of my slide glass is now in. I also installed all interior window trim. Now that the brakes are done I can finish the carpet/jute pad up front.

I pan to drive it to Columbus GG show in July so want to make it as quiet/air tight as possible on the inside. I'm finishing the windlace and additional sound deadener to help.

Marc

**oldman3** · 06-21-2021, 09:57 AM

Marc,kickass ride, very nice work my friend...Jim

06-14-2021, 08:08 AM	#1626
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,263	Re: 53 Surburban "Family Truckster" You got some lookers there checking it out. Good job Marc. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

06-14-2021, 08:12 AM	#1627
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,021	Re: 53 Surburban "Family Truckster" did you put in a magnet to catch the bottle caps!?!? but congrats on the madden cruise! she's a sweet ride

06-14-2021, 10:18 AM	#1629
Tempest67 Registered User Join Date: Sep 2018 Location: Ontario Posts: 786	Re: 53 Surburban "Family Truckster" That looks really cool, well done and Congrats. enjoy __________________ https://67-72chevytrucks.com/vboard/...=797726&page=3 http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781

06-14-2021, 11:04 AM	#1630
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 53 Surburban "Family Truckster" Amazing! congrats on the first outing Austin must have loved it. Like you said most people will not know some of the mods to get it that low, but that just shows you did a great job. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

06-14-2021, 11:56 AM	#1632
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: 53 Surburban "Family Truckster" NICE! __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

06-14-2021, 12:01 PM	#1633
layinrocker65 Registered User Join Date: Jun 2005 Location: California Posts: 521	Re: 53 Surburban "Family Truckster" What a great combo. Really digging the color choices. What’s wrong with the master cylinder? __________________ ‘53 GMC COE stock ‘53 Chevy 3100 LSA/TR6060 http://67-72chevytrucks.com/vboard/s....php?t=805949‘ '70 Chevy C10 LWB 350/sm465 ‘74 Chevy C10 SWB 5.3/4L80e, Vintage Air, Dakota Digital, US Mags

06-14-2021, 12:08 PM	#1634
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: 53 Surburban "Family Truckster" Oooooh my my, that turned out sweeeet! Congratulations on a job well done……..enjoy. __________________ Jan's 53

06-14-2021, 12:52 PM	#1635
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,021	Re: 53 Surburban "Family Truckster" lets not congratulate him too much ... it aint done yet. he could still get in there and install like bright yellow side glass and screw it all up.

06-14-2021, 02:10 PM	#1636
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: 53 Surburban "Family Truckster" Best news I've heard all day..!!!! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

06-14-2021, 11:54 PM	#1639
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: 53 Surburban "Family Truckster" Marc, great job on the burb, shows with family is the best...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-17-2021, 07:17 AM	#1643
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,746	Re: 53 Surburban "Family Truckster" While I wait for my new Wilwood master to show up today to get my brakes sorted out, I decided to install my side rear windows...Man what a pain. Now I know why most people replace the sliding glass with one flat piece. I hope my passengers appreciate the air flow...ha ha 2 down with 2 to go............... Marc Attached Images __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857 Last edited by youngrodder; 06-17-2021 at 10:04 AM.

06-17-2021, 08:47 AM	#1644
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,021	Re: 53 Surburban "Family Truckster" 2pc for a huge win sir, worth it!

06-17-2021, 09:25 AM	#1645
Tempest67 Registered User Join Date: Sep 2018 Location: Ontario Posts: 786	Re: 53 Surburban "Family Truckster" putting these 'finishing touches' on is very rewarding. looks great __________________ https://67-72chevytrucks.com/vboard/...=797726&page=3 http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781

06-17-2021, 10:59 AM	#1647
olcarguy Registered User Join Date: Sep 2019 Location: Maynooth, Ontario, Canada Posts: 174	Re: 53 Surburban "Family Truckster" Looks freaking awesome.... __________________ http://67-72chevytrucks.com/vboard/s...82#post8619382

06-21-2021, 09:50 AM	#1649
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,746	Re: 53 Surburban "Family Truckster" Here are a few more pics. I will drive the Suburban today to confirm but it looks like I fixed my brake issues. All of my slide glass is now in. I also installed all interior window trim. Now that the brakes are done I can finish the carpet/jute pad up front. I pan to drive it to Columbus GG show in July so want to make it as quiet/air tight as possible on the inside. I'm finishing the windlace and additional sound deadener to help. Marc Attached Images __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857



Register or Log In To remove these advertisements.

06-21-2021, 09:57 AM	#1650
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,553	Re: 53 Surburban "Family Truckster" Marc,kickass ride, very nice work my friend...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.