700r4 fluid capacity on fluid and filter change - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G-NUT · 05-31-2019, 11:56 AM

I'm planning on changing my 1984 C10 Suburban transmission fluid and filter. Any recommendations. This will be the first time I've performed this on this vehicle and on a 700r4. I just got this burb. Fluid type, Dextron III from what all I've found. How many qts?

**The Rocknrod** · 05-31-2019, 01:18 PM

https://www.tciauto.com/fluid-capacity

61K10 · 05-31-2019, 01:32 PM

to start put back in the amount you drained out.

Sparky dave · 06-17-2019, 06:24 PM

If it’s just an oil change not a flush do as stated above drain it out and measure it. I think about 6-7 litres went in mine but I might have a big aftermarket sump. When checking your dip stick oil level don’t forget to check it warm with the engine running in neutral. Also a good time to check your tv cable adjustment. I’ve just done all this with mine a couple of weeks ago

05-31-2019, 11:56 AM	#1
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 162	700r4 fluid capacity on fluid and filter change I'm planning on changing my 1984 C10 Suburban transmission fluid and filter. Any recommendations. This will be the first time I've performed this on this vehicle and on a 700r4. I just got this burb. Fluid type, Dextron III from what all I've found. How many qts? __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed

05-31-2019, 01:18 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 700r4 fluid capacity on fluid and filter change https://www.tciauto.com/fluid-capacity __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-31-2019, 01:32 PM	#3
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: 700r4 fluid capacity on fluid and filter change to start put back in the amount you drained out. __________________ 1961 chevy K10 my build is------------61K10 build

06-17-2019, 06:24 PM	#4
Sparky dave Registered User Join Date: Nov 2017 Location: Leeds west yorkshire Posts: 307	Re: 700r4 fluid capacity on fluid and filter change If it’s just an oil change not a flush do as stated above drain it out and measure it. I think about 6-7 litres went in mine but I might have a big aftermarket sump. When checking your dip stick oil level don’t forget to check it warm with the engine running in neutral. Also a good time to check your tv cable adjustment. I’ve just done all this with mine a couple of weeks ago



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.