06-24-2012, 12:50 PM | #1 |
Registered User
Join Date: Mar 2012
Location: Chandler Arizona
Posts: 104
|
engine diagram help
ok i have an 82 c10 not sure if its a custom deluxe, scottsdale or silverado. it came with a 4.1L it now has a 350 which i pulled to do a LS swap. there is a bunch of wires that are cut and i want to see if i will need them later on down the road. ive looked at diagrams on here and nothing seems to match up with what i got. any idea how i can find the right diagram i need? when i print a engine diagram up, i go outside and the color wires dont match up or on the diagram they aint even listed.
|
06-24-2012, 05:36 PM | #2 |
Msgt USAF Ret
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,703
|
Re: engine diagram help
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
06-28-2012, 07:07 PM | #3 |
Registered User
Join Date: Mar 2012
Location: Chandler Arizona
Posts: 104
|
Re: engine diagram help
i was having trouble but i figured out what was wrong, the truck had a 6 cylinder to start off with, someone swaped a 350 into it,so i was thinking since it had a 6 cylinder i should be going off the 6 cylinder diagram. well that wasnt the case. i guess they must have swapped the engine harness as well? any ways who knows. the problem im having now is, in the 8 cylinder engine diagram, i cant seem to find the wiring area where the wires come out the firewall and goes to the blower motor, resistor, and that relay. i looked on every diagram can someone help? its an 82 chevy c10 short bed. there is something on the diagram page 379, but it dont show were the wire comes from or even the right color wires. or where the wires go from the compressor
|
06-28-2012, 08:11 PM | #4 | |
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: engine diagram help
Quote:
Around here this harness is easy to find in wreaking yards. |
|
06-28-2012, 11:21 PM | #5 |
Registered User
Join Date: Mar 2012
Location: Chandler Arizona
Posts: 104
|
Re: engine diagram help
wow, thanks so much! that is way easy to read and just what i was looking for, do you by chance have the rest of the truck diagrams i can get from you? those seem different then what is posted around.
|
Bookmarks |
|
|