Air Cleaners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 03-21-2002, 02:19 AM

With the stock intake manifold or an Edelbrock performer and and HEI what air cleaners will or won't fit? I read that normal 14'' ones do not. I plan to swap to HEI soon and I need to know if I should order an air cleaner too.

daveo68 · 03-21-2002, 03:14 AM

I'm getting ready to do this myself and would like to know also.

Dave

------------------
68 C-10 Custom LWB
307 V8
Three-on-the-tree
Lexington,NC
davideowens@lexcominc.net

Burlinator · 03-21-2002, 04:38 AM

if you are swapping over to HEI you will need a air cleaner for HEI setup as the points style rubs on the cap for now I run mine without and air cleaner( I know I know what can I say I'm cheap) but will be getting one when I wswitch to q-jet

------------------
My CANADA includes BEAVER!!!!!!!
[img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlB*NewhOUaHR6bv*u3evbZdsgR9IvkX4X4GCQKh*KzIWBO9**DLq1ZpIJppCQ/Chevy_anim(1).gif[/img]

71 Custom/10 lb fleet .040 over 350/

burlinator2000@hotmail.com
Richmond,B.C.

[This message has been edited by Burlinator (edited March 21, 2002).]

Longhorn Man · 03-21-2002, 06:53 AM

Eldebrock has a round 14 inch raised airvleaner that will work with HEI. It is in the Signiture series.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!

Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

slam33 · 03-21-2002, 10:28 AM

get an offset base for the air cleaner. Mr Gasket, Moroso, lots of those guys have them. It moves the air cleaner forward.

------------------
71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410

" TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410

</A>

nevada70chev · 03-21-2002, 10:55 AM

got an hei with edelbrock manifold, sp2p (later to install a performer manifold) and carb (1406). i run a stock air cleaner (for now) with a 3-4 inch riser. it clears just fine. soon to get a k&n.

popeye72 · 03-21-2002, 11:05 AM

Ya might have to get a spacer to put under the air cleaner so it will clear the HEI. I had to put one on mine.

mtdave2 · 03-21-2002, 11:10 AM

am i missing something? i have put hei in several trucks with stock air cleaners. never any trouble, didnt even think about it before

Jesse 67 c-10 · 03-21-2002, 11:33 AM

I've got one of those edelbroke pro flo 1000 series ones, their triangular with a kind of wire mesh on top, no clearance probs, it's cheap, re-usable and I like the looks, doesn't hide your entire engine. Just my 3 cents though
Jesse

------------------
Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse

**68SWB4x4** · 03-21-2002, 11:51 AM

those can catch on fire.....

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

NSANE68!!! · 03-21-2002, 12:09 PM

Yep! I seen 2 cars runnin that triangle air filter burn to the ground after it backfired

stelth2002 · 03-21-2002, 12:11 PM

The raised air cleaners will possibly have hood clearence problems. With my 6 i have a 4 barrel and 14" air cleaner with 4 element. My hood barrly fits, but it works fine. Those edelbrock proflows, the foam will get sucked in to the carb after a little use. Thats my experience.

------------------
67 Chevrolet LWB with rebuilt 292. 415 ft. lbs of torque, 4 speed, 3.73 Posi, straight and almost painted.

busterwivell · 03-21-2002, 12:15 PM

I've got an HEI in my 402. I have the spacer on top of my Carter, and have a 14X3 K&N with no problem.

NSANE68!!! · 03-21-2002, 12:19 PM

How ya like my spacer. [img]http://communities.msn.com/_Secure/0MgAAAGYQOIaXblyw3*eyO*MtDVLOV2sCVpWQv688nAx*lrrPLyehIxTjpMGREkZeopNVAaqx4bkCjRN537zDXg/TMP10.jpg[/img] Sorry had to do it. Oh and I have no problems clearing the HEI. hehe. The stock hood will actually close no problem even with all that stuffed in there, but I got a cowl hood anyway, just for the COOL factor. hehe. Later

70c10 · 03-21-2002, 12:59 PM

Slick engine!

70c10 · 03-21-2002, 01:00 PM

Neonlarry,
Try an oval lid. Works great!

**68SWB4x4** · 03-21-2002, 02:14 PM

i have an HEI and ran the stock air cleaner with the stock 3-4" spacer in between it now i switched to edelbrock performer intake, and a edelbrock signature seris air cleaner (it seems light it has a SLIGHT drop base) it clears the HEI just fine but the base hit the electric choke on my Qjet so i used the stock 3-4" spacer but it would work PERFECT with a 1" spacer which edelbrock sells for 10 bucks....
oh anthor thing i just remember i have a 1" carb spacer which could make a diffrence

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

**68SWB4x4** · 03-21-2002, 02:30 PM

i have an HEI and ran the stock air cleaner with the stock 3-4" spacer in between it now i switched to edelbrock performer intake, and a edelbrock signature seris air cleaner (it seems light it has a SLIGHT drop base) it clears the HEI just fine but the base hit the electric choke on my Qjet so i used the stock 3-4" spacer but it would work PERFECT with a 1" spacer which edelbrock sells for 10 bucks....
oh anthor thing i just remember i have a 1" carb spacer which could make a diffrence

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

O'l Buck · 03-21-2002, 02:39 PM

most aftermarket chrome air cleaners will fit, i have a 14" chrome cleaner on mine(no idea what brand, came with the pickup). If you're wanting a stock look, grab an hei cleaner from like a 75 pickup or something.

------------------
'72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

67 Cutlass convertible
330, 3spd stick

90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

meathead95 · 03-21-2002, 03:51 PM

I have a edelbrock 14 inch air cleaner on mine and it fits fine.

pinky350 · 03-21-2002, 06:07 PM

K&N 4" tall 14" dia

Jesse 67 c-10 · 03-21-2002, 07:57 PM

Awww sh$@! really? I sure wouldn't want my truck to burn up. You would think a company like Edelbrok would figure for something like that happening and fix it. I liked that thing too!
Jesse

------------------
Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse

69 longhorn · 03-21-2002, 08:13 PM

NSANE68.....I like that spacer!!!!!

**BIG ORANGE** · 03-21-2002, 09:24 PM

Heres mine,mooneyes and k&nAttachment Converted: "C:\Program Files\Internet Toolkit 4.2\download\MVC-007S.ZIP"

------------------
BIG ORANGE 1971 SUBURBAN
1970/90-Little Buck's Truck (ONE DAY)
USED TRUCK PARTS 4 SALE

**BIG ORANGE** · 03-21-2002, 09:25 PM

Sorry havent figured it out yet.

------------------
BIG ORANGE 1971 SUBURBAN
1970/90-Little Buck's Truck (ONE DAY)
USED TRUCK PARTS 4 SALE

03-21-2002, 02:19 AM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Air Cleaners With the stock intake manifold or an Edelbrock performer and and HEI what air cleaners will or won't fit? I read that normal 14'' ones do not. I plan to swap to HEI soon and I need to know if I should order an air cleaner too. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-21-2002, 03:14 AM	#2
daveo68 Senior Member Join Date: Dec 2001 Location: Lexington,NC Posts: 503	I'm getting ready to do this myself and would like to know also. Dave ------------------ 68 C-10 Custom LWB 307 V8 Three-on-the-tree Lexington,NC davideowens@lexcominc.net __________________ 68 C-10 Custom LWB 307 V8 Lexington,NC davideowens@lexcominc.net God Bless America

03-21-2002, 04:38 AM	#3
Burlinator Just Another Crazy Canuck Join Date: Dec 2000 Location: Richmond,British Columbia Canada Posts: 1,228	if you are swapping over to HEI you will need a air cleaner for HEI setup as the points style rubs on the cap for now I run mine without and air cleaner( I know I know what can I say I'm cheap) but will be getting one when I wswitch to q-jet ------------------ My CANADA includes BEAVER!!!!!!! [img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlBNewhOUaHR6bvu3evbZdsgR9IvkX4X4GCQKhKzIWBO9*DLq1ZpIJppCQ/Chevy_anim(1).gif[/img] 71 Custom/10 lb fleet .040 over 350/ burlinator2000@hotmail.com Richmond,B.C. [This message has been edited by Burlinator (edited March 21, 2002).] __________________ 1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI

03-21-2002, 10:28 AM	#5
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	get an offset base for the air cleaner. Mr Gasket, Moroso, lots of those guys have them. It moves the air cleaner forward. ------------------ 71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410 " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

03-21-2002, 10:55 AM	#6
nevada70chev Registered User Join Date: Jul 2001 Location: reno, nv Posts: 646	got an hei with edelbrock manifold, sp2p (later to install a performer manifold) and carb (1406). i run a stock air cleaner (for now) with a 3-4 inch riser. it clears just fine. soon to get a k&n. __________________ 70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat)

03-21-2002, 06:53 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Eldebrock has a round 14 inch raised airvleaner that will work with HEI. It is in the Signiture series. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

03-21-2002, 11:05 AM	#7
popeye72 Registered User Join Date: Jun 2001 Location: chesapeake, va Posts: 172	Ya might have to get a spacer to put under the air cleaner so it will clear the HEI. I had to put one on mine. __________________ 72 Custom, 400SB,T400,PS,PB,AC Chesapeake, VA

03-21-2002, 11:10 AM	#8
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,507	am i missing something? i have put hei in several trucks with stock air cleaners. never any trouble, didnt even think about it before __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-21-2002, 11:33 AM	#9
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	I've got one of those edelbroke pro flo 1000 series ones, their triangular with a kind of wire mesh on top, no clearance probs, it's cheap, re-usable and I like the looks, doesn't hide your entire engine. Just my 3 cents though Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.

03-21-2002, 11:51 AM	#10
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	those can catch on fire..... ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

03-21-2002, 12:09 PM	#11
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	Yep! I seen 2 cars runnin that triangle air filter burn to the ground after it backfired __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

03-21-2002, 12:11 PM	#12
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	The raised air cleaners will possibly have hood clearence problems. With my 6 i have a 4 barrel and 14" air cleaner with 4 element. My hood barrly fits, but it works fine. Those edelbrock proflows, the foam will get sucked in to the carb after a little use. Thats my experience. ------------------ 67 Chevrolet LWB with rebuilt 292. 415 ft. lbs of torque, 4 speed, 3.73 Posi, straight and almost painted. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

03-21-2002, 12:15 PM	#13
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I've got an HEI in my 402. I have the spacer on top of my Carter, and have a 14X3 K&N with no problem. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

03-21-2002, 12:19 PM	#14
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	How ya like my spacer. [img]http://communities.msn.com/_Secure/0MgAAAGYQOIaXblyw3eyOMtDVLOV2sCVpWQv688nAx*lrrPLyehIxTjpMGREkZeopNVAaqx4bkCjRN537zDXg/TMP10.jpg[/img] Sorry had to do it. Oh and I have no problems clearing the HEI. hehe. The stock hood will actually close no problem even with all that stuffed in there, but I got a cowl hood anyway, just for the COOL factor. hehe. Later __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

03-21-2002, 12:59 PM	#15
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Slick engine! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

03-21-2002, 01:00 PM	#16
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Neonlarry, Try an oval lid. Works great! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-21-2002, 02:14 PM	#17
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	i have an HEI and ran the stock air cleaner with the stock 3-4" spacer in between it now i switched to edelbrock performer intake, and a edelbrock signature seris air cleaner (it seems light it has a SLIGHT drop base) it clears the HEI just fine but the base hit the electric choke on my Qjet so i used the stock 3-4" spacer but it would work PERFECT with a 1" spacer which edelbrock sells for 10 bucks.... oh anthor thing i just remember i have a 1" carb spacer which could make a diffrence ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

03-21-2002, 02:30 PM	#18
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	i have an HEI and ran the stock air cleaner with the stock 3-4" spacer in between it now i switched to edelbrock performer intake, and a edelbrock signature seris air cleaner (it seems light it has a SLIGHT drop base) it clears the HEI just fine but the base hit the electric choke on my Qjet so i used the stock 3-4" spacer but it would work PERFECT with a 1" spacer which edelbrock sells for 10 bucks.... oh anthor thing i just remember i have a 1" carb spacer which could make a diffrence ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

03-21-2002, 02:39 PM	#19
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	most aftermarket chrome air cleaners will fit, i have a 14" chrome cleaner on mine(no idea what brand, came with the pickup). If you're wanting a stock look, grab an hei cleaner from like a 75 pickup or something. ------------------ '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s 67 Cutlass convertible 330, 3spd stick 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

03-21-2002, 03:51 PM	#20
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	I have a edelbrock 14 inch air cleaner on mine and it fits fine. __________________ 72 2wd blazer 72 swb 4x4

03-21-2002, 06:07 PM	#21
pinky350 Registered User Join Date: Jun 2001 Location: TX Posts: 91	K&N 4" tall 14" dia

03-21-2002, 07:57 PM	#22
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	Awww sh$@! really? I sure wouldn't want my truck to burn up. You would think a company like Edelbrok would figure for something like that happening and fix it. I liked that thing too! Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.

03-21-2002, 08:13 PM	#23
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	NSANE68.....I like that spacer!!!!! __________________ http://community.webshots.com/user/hotrodhorn

03-21-2002, 09:24 PM	#24
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Heres mine,mooneyes and k&nAttachment Converted: "C:\Program Files\Internet Toolkit 4.2\download\MVC-007S.ZIP" ------------------ BIG ORANGE 1971 SUBURBAN 1970/90-Little Buck's Truck (ONE DAY) USED TRUCK PARTS 4 SALE __________________ Things happen for a reason!

03-21-2002, 09:25 PM	#25
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	Sorry havent figured it out yet. ------------------ BIG ORANGE 1971 SUBURBAN 1970/90-Little Buck's Truck (ONE DAY) USED TRUCK PARTS 4 SALE __________________ Things happen for a reason!

Register or Log In To remove these advertisements.