SC WTB Three on the tree linkage... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**angusmac** · 12-27-2022, 05:02 PM

I know! kind of a bass ackward situation but my buddy wants to deconvert from his pretty poor floor shifter back to the column. Have the column and transmission, just need the linkage between them. Any help is appreciated.

**Seanext** · 12-27-2022, 05:56 PM

I have some but will be a week or so before I can get to them you can have them just pay for shipping or if you are in the Charlotte area I will meet you somewhere.

**NGN** · 12-27-2022, 08:42 PM

Would there be a difference with the linkage for straight 6 or V8 or are the same.

**1rippen6** · 12-27-2022, 09:17 PM

I believe I have some but not sure if it's 2wd or 4x4

**angusmac** · 01-11-2023, 07:12 AM

I am not sure about the V-8/I6 thing.... excellent question. This truck is a 2wd. Let me know what you have and how much you need for it. Thank you for your responses.

Knight72 · 01-12-2023, 06:09 PM

I have a whole linkage assembly in my parts tub outside from a 72 c10 with 350. I need to look and see what parts I'd need to ship as I don't remember what all goes with the linkage but I'd be happy to sell them and i know it is complete. Not sure what a fair price would be? How does $60+ shipping cost sound?

**angusmac** · 01-14-2023, 01:19 PM

Knight72, Sounds reasonable. I will PM you with specifics.

Thanks to all who responded.

**angusmac** · 02-08-2023, 08:23 AM

Seanext has very graciously got me headed in the right direction but was only able to locate one of the links (don't know which one..) Any additional help would be appreciated.
Thank you for looking.

**angusmac** · 02-24-2023, 08:19 AM

anyone.....anyone... BUELLER!

**angusmac** · 03-03-2023, 07:08 AM

Up!

**1rippen6** · 03-03-2023, 08:50 AM

I was trying to find this post yesterday, lol, I found 1 rod of a 4x4 so not much help.

**Grumpy old man** · 03-03-2023, 08:52 AM

Is it a 6 or V8 ? The column is located in the same place for either , The 6 sits 3" back compaired to a V8 in the stock position. If a V8 was installed in the 6 location the same 6 rods would be used.

so the shift rods would be different stock 6 vs stock position V8

Post a picture of the engine mount location on the frame and a picture of the trans shifter arms / left side

What year is the truck and does the vin start with CE or CS ?

When asking about parts Always add year and model , V8 or 6 and post pictures . Otherwise everyone is just guessing what you have and need .

**angusmac** · 03-10-2023, 09:38 AM

It is a '67 C-10 with a stock 6 cylinder. I do not currently have access to the truck to take photos.. I appreciate the advice.

"I was trying to find this post yesterday, lol, I found 1 rod of a 4x4 so not much help."
I appreciate you looking.

geezer#99 · 03-10-2023, 09:59 AM

To help your search you’ll need 1963-1968 six cylinder rods.
Transmission changed to full synchro style in 1969 and the rods connect to the transmission differently.

**Grumpy old man** · 03-10-2023, 03:03 PM

I've got some 67 shift rods and columns / linkage , I'll get some pictures later today .

**angusmac** · 03-17-2023, 12:45 PM

Thank you.

**angusmac** · 03-26-2023, 08:05 AM

Quote:

Originally Posted by Grumpy old man

I've got some 67 shift rods and columns / linkage , I'll get some pictures later today .

Any luck?

**Grumpy old man** · 03-26-2023, 11:24 AM

Quote:

Originally Posted by angusmac

Any luck?

Yep , I forgot to post the picture .

67 - 3 speed column shift rods , I have the lower column shift rod adjustment brackets also .

**angusmac** · 03-27-2023, 09:35 AM

What do you want for them? PM me details and we can work something out. Thank you again.

**angusmac** · 03-28-2023, 02:11 PM

Your PM bucket is full. I was unable to respond to your request via PM but 29805...

**Grumpy old man** · 03-29-2023, 03:35 PM

PM sent with shipping cost .

**angusmac** · 03-31-2023, 06:42 AM

Payment sent. Thank you.

12-27-2022, 05:02 PM	#1
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	WTB Three on the tree linkage... I know! kind of a bass ackward situation but my buddy wants to deconvert from his pretty poor floor shifter back to the column. Have the column and transmission, just need the linkage between them. Any help is appreciated.

12-27-2022, 05:56 PM	#2
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 586	Re: WTB Three on the tree linkage... I have some but will be a week or so before I can get to them you can have them just pay for shipping or if you are in the Charlotte area I will meet you somewhere.

12-27-2022, 08:42 PM	#3
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 815	Re: WTB Three on the tree linkage... Would there be a difference with the linkage for straight 6 or V8 or are the same.

12-27-2022, 09:17 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB Three on the tree linkage... I believe I have some but not sure if it's 2wd or 4x4

01-11-2023, 07:12 AM	#5
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... I am not sure about the V-8/I6 thing.... excellent question. This truck is a 2wd. Let me know what you have and how much you need for it. Thank you for your responses.

01-12-2023, 06:09 PM	#6
Knight72 Registered User Join Date: Aug 2016 Location: Southside, Alabama Posts: 173	Re: WTB Three on the tree linkage... I have a whole linkage assembly in my parts tub outside from a 72 c10 with 350. I need to look and see what parts I'd need to ship as I don't remember what all goes with the linkage but I'd be happy to sell them and i know it is complete. Not sure what a fair price would be? How does $60+ shipping cost sound? __________________ 72 C10 lwb fleetside aka Big Rhonda. Still plugging away. Build thread: http://67-72chevytrucks.com/vboard/s...42#post8247142

01-14-2023, 01:19 PM	#7
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Knight72, Sounds reasonable. I will PM you with specifics. Thanks to all who responded.

02-08-2023, 08:23 AM	#8
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Seanext has very graciously got me headed in the right direction but was only able to locate one of the links (don't know which one..) Any additional help would be appreciated. Thank you for looking.

02-24-2023, 08:19 AM	#9
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... anyone.....anyone... BUELLER!

03-03-2023, 07:08 AM	#10
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Up!

03-03-2023, 08:50 AM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: WTB Three on the tree linkage... I was trying to find this post yesterday, lol, I found 1 rod of a 4x4 so not much help.

03-03-2023, 08:52 AM	#12
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB Three on the tree linkage... Is it a 6 or V8 ? The column is located in the same place for either , The 6 sits 3" back compaired to a V8 in the stock position. If a V8 was installed in the 6 location the same 6 rods would be used. so the shift rods would be different stock 6 vs stock position V8 Post a picture of the engine mount location on the frame and a picture of the trans shifter arms / left side What year is the truck and does the vin start with CE or CS ? When asking about parts Always add year and model , V8 or 6 and post pictures . Otherwise everyone is just guessing what you have and need . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop Last edited by Grumpy old man; 03-03-2023 at 09:00 AM.

03-10-2023, 09:38 AM	#13
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... It is a '67 C-10 with a stock 6 cylinder. I do not currently have access to the truck to take photos.. I appreciate the advice. "I was trying to find this post yesterday, lol, I found 1 rod of a 4x4 so not much help." I appreciate you looking.

03-10-2023, 09:59 AM	#14
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,516	Re: WTB Three on the tree linkage... To help your search you’ll need 1963-1968 six cylinder rods. Transmission changed to full synchro style in 1969 and the rods connect to the transmission differently.

03-10-2023, 03:03 PM	#15
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB Three on the tree linkage... I've got some 67 shift rods and columns / linkage , I'll get some pictures later today . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

03-17-2023, 12:45 PM	#16
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Thank you.

03-27-2023, 09:35 AM	#19
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... What do you want for them? PM me details and we can work something out. Thank you again.

03-28-2023, 02:11 PM	#20
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Your PM bucket is full. I was unable to respond to your request via PM but 29805...

03-29-2023, 03:35 PM	#21
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB Three on the tree linkage... PM sent with shipping cost . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

03-31-2023, 06:42 AM	#22
angusmac New Member Join Date: Sep 2017 Location: Aiken, SC Posts: 18	Re: WTB Three on the tree linkage... Payment sent. Thank you.

Register or Log In To remove these advertisements.