The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-15-2023, 10:38 AM   #326
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Thanks, making progress on the Camaro always puts a smile on my face.




Here’s an off-topic “Squirrel” moment! A friend acquired this 66 Vette with perfect patina out of Colorado. Reminded me so much of our old car (link) I had to share it. The plan is to rebuild the 427, make it run and drive and leave it crusty.
http://67-72chevytrucks.com/vboard/s...&postcount=127

Fast forward a few months and that’s exactly what happened, the 66 got a fresh rebuild and he was able to drive it home. After a few more months went by this same friend has just recently revealed his latest (and greatest) find to the world. It’s blowing the minds of the Corvette community, 1953 Corvette vin number 001!


Here’s a few articles on this amazing find.
https://www.corvetteblogger.com/2023...-rediscovered/
https://www.streetmusclemag.com/feat...make-the-call/
https://www.hemmings.com/stories/fir...lCf0fe8XLLMPY0
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 03-15-2023, 01:05 PM   #327
69cam
Senior Member
 
Join Date: Jan 2017
Location: Olney Il.
Posts: 221
Re: 67 Camaro Build

Read the articles. Wow! What history and a great find. Used to work in a body shop. The owner had several Ford Skyliners, but the last couple years I worked there he bought, and we restored, a very nice 54 Corvette. It was a lot of fun.
69cam is offline   Reply With Quote
Old 03-15-2023, 03:42 PM   #328
joesscamaro
Registered User
 
Join Date: Sep 2008
Location: Newport, North Carolina
Posts: 612
Re: 67 Camaro Build

Both vettes are really cool but the story on that '53 is amazing. Thanks for sharing!
joesscamaro is offline   Reply With Quote
Old 03-19-2023, 09:26 AM   #329
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Yep, really cool stuff I’m sure we’ll hear more on the first 53 Corvette as time goes on. Corey's current plans are that he'll take the car to some major events and let people see it in its raw state before any restoration takes place. I believe a reveal is being arranged at the National Corvette Museum for later this year.




It's time to get back to the steering column, we left off by blowing it apart and ordering in a very nice rebuild kit (link). Took some reference pics of the firewall mounting plate so I can try and get it close on reassembly. Before and after going through the blast cabinet, no special media just sand. Used a wire wheel and some sandpaper on the inner sleeve and column to knock off all the surface rust.
http://67-72chevytrucks.com/vboard/s...&postcount=266
Attached Images
    
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 03-22-2023, 09:30 AM   #330
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

The Camaro has moved back over to the main building and is getting some more bodywork. They're just starting to work the roof to quarter panel seams, etc.

Sent the old M/T’s and some extended hex nut hold-downs out for polish and wow, they turned out great! Everything matches the polish on the breathers now, long time local vendor Metal Masters does a great job.
https://www.slcmetalmaster.com/
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 03-26-2023, 08:57 AM   #331
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Continuing on with the steering column parts getting some paint and a clear coating for the bare metal stuff. Several coats of rattle can Rust-oleum Satin Canyon Black & Satin Clear are what was used.
Attached Images
    
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 03-27-2023, 06:10 AM   #332
72 tigger
Senior Member
 
72 tigger's Avatar
 
Join Date: Apr 2008
Location: Berne IN
Posts: 3,188
Re: 67 Camaro Build

Chrome and column are looking great!
Cool Vette stories
__________________
71 C10
72 K20
72 K10 Super
Kirk
72 tigger is offline   Reply With Quote
Old 03-29-2023, 08:51 AM   #333
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Thanks Kirk. Yeah, those old M/T’s polished up just like new.



Media blasted the seat tracks as well to remove the 55+ year old surface rust. After a quick cleanup, they got some satin clear also. Only had one good (?) original set of seat adjusters and seat return springs, ordered new springs and adjuster knobs for the final assembly later.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-02-2023, 08:47 AM   #334
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

There are a few more do-dads to prep this round, even threw in a flex plate for our half-ton project. Yep, still geeking out over the dated blower motor that works great. The steering column coupler flange should be a natural finish but since the new mating piece on the steering box side is coated, we’ll walk on the wild side and paint this to match.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-05-2023, 09:47 AM   #335
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Our steering column is ready for reassembly. First thing was to create a homemade seal between the inner and outer sleeves. Found disintegrated remnants of a foam gasket during disassembly. Had some of this window seal stuff left over from the sandblast cabinet redo, it’s very close and will work fine. Just a little bit too thick, which some electrical tape solved.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-09-2023, 08:42 AM   #336
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

The new lower bearing assembly fit perfectly and went right together. The upper white plastic bearing had a small piece broken which I super glued back into place and will function fine. Cleaned and repacked the upper bearing which was still in good shape as well.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-12-2023, 09:15 AM   #337
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

So, rebuilding this style of column (floor shift, non-tilt, and no lock cylinder) is as easy as they come. I’m pleased with the results and that NOS-dated turn signal switch is a pretty darn cool piece. The rest of the stuff (turn signal lever, hazard button, etc.) will be installed when it’s going into the car so this is the final on this for now.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-16-2023, 08:46 AM   #338
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Some polished Ansen valve cover spacers (link) arrived. Man, this stuff looks so good, can I really bring myself to punch holes in the covers to mount the old M/T breathers? Yep, of course, that’s why I got the breathers and then the valve covers in the first place. I need to gather the hardware and make some gaskets as well as decide if they’ll be functional or not (functional will mean they’ll probably leak), here's a pic of what the functional gasket would look like.

https://www.ansenvalvecovers.com/col...acers-polished
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-19-2023, 09:12 AM   #339
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

With the steering column rebuilt (and building up some guts to punch holes in the M/T’s. ) my attention has moved back to the Hurst Ramrod shifter collection. My goal is to build as close to a NOS shifter as possible for the Camaro. The first step in that process was to disassemble our original mockup shifter. Here are some pics of the order and orientation of the different shifter plates for reassembly.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-19-2023, 11:41 AM   #340
Lost in the 60's
Active Member
 
Lost in the 60's's Avatar
 
Join Date: Mar 2022
Location: Twin Cites, MN
Posts: 153
Re: 67 Camaro Build

I found this thread about 1.5 hours ago and I didn't read every page...
Sooo, after all the time, frustration, expense and work, do you still think the new body was worthwhile ?
This is my '67 ss/rs about 1 year ago. New left quarter skin, 1 piece trunk floor, extension panel, NOS right quarter and tail panel.



Lost in the 60's is online now   Reply With Quote
Old 04-23-2023, 09:14 AM   #341
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

I’m glad you found our thread, you have a nice car Lost in the 60’s! That’s a good question, I’ll say that everyone’s situation is different (as in the quality of their donor, or lack thereof, skills, finances, etc.). Just like everyone’s end goal can vary greatly as well (driver, racecar, restomod, show car, etc.). In our case, the new body has not been a cost or time savings really. I’ll also add there isn’t much of the original car going into the new car either, I made a list (see pic).

Now some good points, there’s absolutely no rust anywhere in our shell (that’s a biggie. ). I believe it’s put together as well, perhaps even better than an original body (more spot welds per foot, etc.). The mini tub installation is top notch and was installed prior to the quarters going on which isn’t always the case for a modified original car. Thanks to Perks Auto Body (Don, Kelly & Chris) the fit and finish are going to be as good or better than a brand-new car (more on this to come). I think it’s cool that this route is even a possibility so yes, for me it is worthwhile.




And the rest, down to just the stick and trigger assembly which is pretty straightforward. Remove a self-locking nut and pivot pin and the lower trigger assembly will disassemble.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 04-26-2023, 09:25 AM   #342
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Here are our three recently acquired shifters with the one on the left being an early style. As previously mentioned, the earlier one is in great shape and will be left as is. An early version is easy to spot as the reverse lever is flat not round. Also, they are riveted together and I think might’ve come loose over time. Later versions got the welded tapered round bar lever.

In the same picture of the reverse lever rivets, notice the chrome stick on the right has been repaired (or customized) and the threads are much larger with a finer pitch than the original. Folks could slam the shifter so hard that they would bend or break the top right off! This particular stick will be replaced on the reassembly of this shifter.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2

Last edited by 7dee2; 04-26-2023 at 09:30 AM.
7dee2 is offline   Reply With Quote
Old 04-30-2023, 08:43 AM   #343
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Another small difference is the pull-up trigger lever, weld vs a roll pin to hold the two halves together. With all three shifters being disassembled let the cherry-picking begin.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 05-01-2023, 12:53 PM   #344
Troy Sr
Registered User
 
Troy Sr's Avatar
 
Join Date: Nov 2013
Location: Antioch, Ca.
Posts: 442
Re: 67 Camaro Build

I may have missed it, but are you a collector of Hurst Shifters?
__________________
Take Care
Troy
Troy Sr is offline   Reply With Quote
Old 05-03-2023, 08:56 AM   #345
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Ha, I didn’t think so but I’ve got a few. It all started off just wanting to run our very nice Mr. Gasket Vertical Gate that I bought years ago (1st link). Then I switched to the Hurst Ram 4 when we figured out Mrs. 7dee2 couldn’t shift the V-Gate in a side by side comparison (2nd link). That led to building the best one I could (just cuz) and before you know it, I’ve got 4 of them (3rd link), Jimmany Christmas!

http://67-72chevytrucks.com/vboard/s...&postcount=119
http://67-72chevytrucks.com/vboard/s...&postcount=254
http://67-72chevytrucks.com/vboard/s...&postcount=276




One of the challenges with the roof to quarter panel transition is the inner drip edge. Factory cars have a raised area right before the bottom of the gutter. With our aftermarket panels, this was not consistent from roof to quarter panel or even left to right, each side being a little different. Kelly is making sure these areas are uniform on all sides.
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 05-07-2023, 08:46 AM   #346
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Here’s the reveal molding collection with some additional OE pieces that were acquired to replace the worst stuff (almost 2 sets). Also, an original drip edge molding which was not quite as good as I’d remembered. The boxes in the bed are all new reproduction pieces, this could be a molding overload!

With the body shop making every effort to make the car fit better than new, my question is what’s going to fit the best? The right side wing window was a problem in the initial fitment so back to what was said earlier, and is still holding true. We’re not assuming anything fits correctly and this is the first time these pieces have been tried, fingers crossed.

Since it’s a reproduction body and everything on the exterior will be a repro I am leaning towards the new moldings. Another thought is that original pieces always seem to need additional work and are getting harder to acquire if needed in the future.
Attached Images
    
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 05-07-2023, 08:12 PM   #347
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,733
Re: 67 Camaro Build

Pertaining to 67's (dont think I mentioned it here yet), a buddy has had a 67 just sitting at his place forever. Just a shell, from the doors back, and the back half had been modified (poorly) to run larger tires. No seats, engine, trans, nothing.

He decided to sell it, figured he'd start at 7500 bucks, you know, ask for the moon. Phone rang off the hook and first caller couldn't get out there fast enough to get it. Crazy times.

Im enjoying watching your progress.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 05-08-2023, 08:25 AM   #348
Lost in the 60's
Active Member
 
Lost in the 60's's Avatar
 
Join Date: Mar 2022
Location: Twin Cites, MN
Posts: 153
Re: 67 Camaro Build

Quote:
Originally Posted by CG View Post
Pertaining to 67's (dont think I mentioned it here yet), a buddy has had a 67 just sitting at his place forever. Just a shell, from the doors back, and the back half had been modified (poorly) to run larger tires. No seats, engine, trans, nothing.

He decided to sell it, figured he'd start at 7500 bucks, you know, ask for the moon. Phone rang off the hook and first caller couldn't get out there fast enough to get it. Crazy times.

Im enjoying watching your progress.
You certain that was a '67 shell, not a '69 ?? No vin tag/title with it ?
Lost in the 60's is online now   Reply With Quote
Old 05-08-2023, 05:04 PM   #349
regan wilson
Senior Member
 
regan wilson's Avatar
 
Join Date: Mar 2008
Location: tyler texas
Posts: 1,527
Re: 67 Camaro Build

Even wrecked race cars bring good money for the VIN.
__________________
NHRA Super Street 469C
It only runs 10.90 at 156 mph
regan wilson is offline   Reply With Quote
Old 05-10-2023, 09:05 AM   #350
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,884
Re: 67 Camaro Build

Thanks CG, I’m glad you’re enjoying the build. It’s fun going back and putting words to the pictures, telling The Good, the Bad, and the Ugly story "ah ee ah ee ah wah wah wah".

It is surprising how much Camaro shells can bring, and the lengths folks will go to save them. The good thing is it’s made for a stronger aftermarket for not only the Camaro but most muscle cars from the big three. I hope it continues and as David Freiburger says “Gasoline Forever”!




One shifter piece that always seems to be missing is this little plastic flange bearing, they get brittle over time and disintegrate. When that happens the pull-up trigger rod will rub against the stick so it's metal on metal, it ruins the rod over time and is noticeable when using the shifter. Found a very close replacement on ebay (link), just remove the locator tab and it’s a good match. With a lot of 50, we now have several lifetimes of replacements. https://www.ebay.com/itm/262376570626
Attached Images
     
__________________
Brett
67 Camaro SS Build:http://67-72chevytrucks.com/vboard/s...d.php?t=751594
72 Cheyenne/10 Super 115" Fleetside (Waiting it's turn.)
72 Cheyenne/K30 Super 133" DRW SOLD Build:http://67-72chevytrucks.com/vboard/s...d.php?t=645614
YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com