The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-18-2015, 09:12 AM   #1
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
New member with a 1960

Hi guys,

New member here. I just picked up a 1960 Apache 10, I jumped on the Rat Rod wagon and want to get this project rolling. I am wondering the best way to lower the truck and retain ride quality. I am not trying to put it right on the ground but would like to get the tires tucked up in the fenders, somewhere around 10 inches in the rear, right now it measures 22 inches from the bottom of the rear fender to the ground, I think about 10 inches would be ideal. I would like to relocate the fuel tank also! I am leaning towards a 5.3 LS implant as well! Below is a link to the wheels I was looking at, can you run a 16x10 rear and 16x8 front without issues?

http://www.summitracing.com/parts/usw-54-7060/overview/





















The1960APE is offline   Reply With Quote
Old 08-18-2015, 09:42 AM   #2
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: New member with a 1960

Welcome ,that looks like a great start .
flashed is offline   Reply With Quote
Old 08-18-2015, 10:03 AM   #3
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: New member with a 1960

Shiny truck to start with! Welcome aboard.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 08-18-2015, 10:11 AM   #4
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Thanks guys, and all help, advice and/or suggestions are greatly welcomed and appreciated! This is my first truck build, lots of cars in the past but no trucks!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 10:18 AM   #5
pimpston65
Senior Member
 
pimpston65's Avatar
 
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,185
Re: New member with a 1960

Quote:
Originally Posted by The1960APE View Post
Thanks guys, and all help, advice and/or suggestions are greatly welcomed and appreciated! This is my first truck build, lots of cars in the past but no trucks!
yeah give up on trucks, stick to cars!!! oh and sell it to me...
pimpston65 is offline   Reply With Quote
Old 08-18-2015, 10:20 AM   #6
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Quote:
Originally Posted by pimpston65 View Post
yeah give up on trucks, stick to cars!!! oh and sell it to me...
I probably gave way too much for it, you might slap me for the price!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 10:22 AM   #7
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Does any company re-pop that center "Chevrolet" grill? I cannot locate one!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 10:22 AM   #8
doobiebro
Registered User
 
doobiebro's Avatar
 
Join Date: Nov 2011
Location: Chaparral NM
Posts: 688
Re: New member with a 1960

Not sure on the wheel size, but ride height 10" you might have to c notch the rear. My 60 I installed 2 1/2" drop spindles and turned the torsion bars (front) and (rear) installed 4" drop coil springs..here is a pic
Attached Images
 
__________________
CURRENT & PAST CHEVY TRUCKS
60 C-10 Apache short step side
62 C-10 short step side
66 GMC Long bed fleet side 305 V-6
77 C-20 Custom Deluxe (Blue Goose)
doobiebro is offline   Reply With Quote
Old 08-18-2015, 10:23 AM   #9
doobiebro
Registered User
 
doobiebro's Avatar
 
Join Date: Nov 2011
Location: Chaparral NM
Posts: 688
Re: New member with a 1960

Quote:
Originally Posted by The1960APE View Post
Does any company re-pop that center "Chevrolet" grill? I cannot locate one!
no one repops 60 grill. You have a 61 grill and hood pods..
__________________
CURRENT & PAST CHEVY TRUCKS
60 C-10 Apache short step side
62 C-10 short step side
66 GMC Long bed fleet side 305 V-6
77 C-20 Custom Deluxe (Blue Goose)
doobiebro is offline   Reply With Quote
Old 08-18-2015, 10:26 AM   #10
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Quote:
Originally Posted by doobiebro View Post
Not sure on the wheel size, but ride height 10" you might have to c notch the rear. My 60 I installed 2 1/2" drop spindles and turned the torsion bars (front) and (rear) installed 4" drop coil springs..here is a pic
That is perfect...... I love it! thats what I am looking for!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 10:27 AM   #11
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Quote:
Originally Posted by doobiebro View Post
no one repops 60 grill. You have a 61 grill..
Heck I may have a 61 truck then, I had no clue, the seller told me it was a 60, but since it came from GA all I have is a bill of sale, it checks out though!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 11:07 AM   #12
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: New member with a 1960

Lotta times the 60 and 61 get mixed up...sometimes you can have a 60 with 61 parts. lol I'd check the title.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 08-18-2015, 03:03 PM   #13
joe dirt
Registered User
 
joe dirt's Avatar
 
Join Date: Dec 2014
Location: portland oregon
Posts: 292
Re: New member with a 1960

yup, definitely a 61 front end...sweet truck by the way
__________________
1961 c10 longbed - gone

1964 c10 swb
joe dirt is offline   Reply With Quote
Old 08-18-2015, 03:14 PM   #14
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

Quote:
Originally Posted by joe dirt View Post
yup, definitely a 61 front end...sweet truck by the way
Thank you sir, Hopefully you guys will hold my hand on this build!
The1960APE is offline   Reply With Quote
Old 08-18-2015, 04:24 PM   #15
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: New member with a 1960

Welcome to the forum from another NC member. Get the title resolved with NC since its an antique out of state transfer before you do anything with the truck requiring money. Have you verified the frame and VIN # are the same. Very important with NC. I have done several antique titles from out of state and NC can be fun to deal with, but that will be the 1st thing they will want to come see.

The frame vin # is on the driver side just over the a arm. Cab vin should be on the cab A pillar once you open the door. Once you have clear NC title....spend and play away.

Great looking project though and looks like it'll be a fun build. Keep us posted with pics and updates and if you make it down to the sandhills be sure to let me know. We have a good group of 60-66 guys down here!!
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 08-18-2015, 05:13 PM   #16
verdell
Registered User
 
verdell's Avatar
 
Join Date: Feb 2013
Location: Columbus, MS
Posts: 433
Re: New member with a 1960

Quote:
Originally Posted by The1960APE View Post
That is perfect...... I love it! thats what I am looking for!
Welcome to the Forum! You have an awesome looking truck to start out with. It's great to see another wrap around windshield join, especially a 60-61! LOL ...X2 what Doobie said earlier, this is a 2.5" drop spindle torsion bar adjusted front end. I went from 4" lowered coils in the rear to bags tho. These guys on this forum are awesome...Enjoy your Truck!
Attached Images
  
verdell is offline   Reply With Quote
Old 08-18-2015, 06:16 PM   #17
par4tom
Registered User
 
Join Date: Nov 2012
Location: Kingsburg CA
Posts: 581
Re: New member with a 1960

You can get 10" wheels in the back depending upon the offset. Zero offset may create a rubbing on the fender wells and you may have to use a 1/2 inch spacer.

Also, watch over the top of the tires in the rear. There is an outer fender edge and bracing that could come into play depending upon the size wheel and tire and how low you set the truck.

I just went through this with 20 inche / 10" wide wheels, tried 285's, then 265's then 255 20's before I finally got them to fit. I think there is about 12.5" of room between the fender lip and the bed so tire width is not unlimited.

On the front, you shouldn't have a problem depending upon how low you choose to go. I used 2.5" drops in the front and then cranked the torsion bars up as the 8.5" 245's were rubbing the fender lips. I am rolling the lips up this week to get a little bit more clearance. BTW, mine only rubbed on the passenger side and on turns to the right while hitting a slight bump.

Great looking truck you got there...I like it a lot!!! Here are the 10 inch wheels in the rear...Foose Legends. My rear axel is on bags so I run it just a bit lower then this right now...no rubbing!
Attached Images
 
__________________
My Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=705185
How to Get Audiophile Sound in 60-66 Trucks
http://67-72chevytrucks.com/vboard/s...=1#post7236896
Building Your Own Speaker Kick Pods
http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495
par4tom is offline   Reply With Quote
Old 08-18-2015, 10:54 PM   #18
DPowers
One foot in front of the other
 
DPowers's Avatar
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,421
Re: New member with a 1960

Welcome from just a state away.
DPowers is offline   Reply With Quote
Old 08-19-2015, 12:28 AM   #19
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: New member with a 1960

Welcome to the forum

The stepsides have less room for tires and wheels than the fleetsides do. Keep that in mind with the examples given here.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-19-2015, 01:33 AM   #20
61ChevyPanel
Active Member
 
61ChevyPanel's Avatar
 
Join Date: Nov 2011
Location: Los Angeles, CA
Posts: 107
Re: New member with a 1960

Us '60/'61 guys welcome you. We need the company. Not many parts that are '60'-62 exclusively are reproduced or available in catalogs such as LMC and Brothers. The Apache 10 hood badges are the only '61 parts I know of that are reproduced. Your hood bow tie is for an inline 6 truck. The V8s have a V under the bow tie. I haven't found one of those yet.

Mine is the white Panel, getting ready for the road after 20 years of storage.

The blue one belongs to a guy named Stewie but looks a little like yours.

Daryl
Attached Images
  
61ChevyPanel is offline   Reply With Quote
Old 08-20-2015, 03:36 PM   #21
Northwest Outlaw
Registered User
 
Northwest Outlaw's Avatar
 
Join Date: Jul 2015
Location: Seattle
Posts: 228
Re: New member with a 1960

Good looking truck, a lot better than mine! I was also told the wrong year by the seller. He had it listed as a '62 even though the title WITH HIS NAME ONE IT in the glove box read '61! hahahaha. Hood pods are the give away, and the awesome wrap around window.
Gonna follow this thread as it's basically the same as my project.
Here's a pic of my 61 Apache "BoomStick", not nearly as clean as yours.
Attached Images
 
__________________
1961 Chevy Apache "BoomStick"
-First build, lots of plans, little experience. What's the worst that could happen?
http://67-72chevytrucks.com/vboard/s...d.php?t=694506
Northwest Outlaw is offline   Reply With Quote
Old 08-21-2015, 09:51 AM   #22
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

You guys were dead on, It is indeed a 1961, CRAP my name is the1960APE.....Dang it LOL
The1960APE is offline   Reply With Quote
Old 08-21-2015, 12:15 PM   #23
Northwest Outlaw
Registered User
 
Northwest Outlaw's Avatar
 
Join Date: Jul 2015
Location: Seattle
Posts: 228
Re: New member with a 1960

Quote:
Originally Posted by The1960APE View Post
You guys were dead on, It is indeed a 1961, CRAP my name is the1960APE.....Dang it LOL
guess you got to get another one, a '60 so you're not a liar! ahahaha
__________________
1961 Chevy Apache "BoomStick"
-First build, lots of plans, little experience. What's the worst that could happen?
http://67-72chevytrucks.com/vboard/s...d.php?t=694506
Northwest Outlaw is offline   Reply With Quote
Old 08-24-2015, 03:57 PM   #24
The1960APE
Registered User
 
The1960APE's Avatar
 
Join Date: Aug 2015
Location: Asheville NC
Posts: 494
Re: New member with a 1960

I am getting ready to bite the bullet and order parts, title was no issue as I had the previous 2 bills of sale from GA. I have been jumping back and forth between wheel selections and have landed on the American racing wheels Rally style wheels either in 17" or 18" maybe 18x7 fronts and 18x8 rears or 18x8 fronts and 18x9 rears, which poses the next problem, they only come in 5 lug, so since I am changing to disc brakes the front is not an issue, I cannot find much info on the rear ends of these trucks (12 bolt 10 bolt etc)
I did read somewhere that it was easiest to pull the axles have them welded and re-drilled for 5 lug. Any other suggestions guys?
The1960APE is offline   Reply With Quote
Old 08-24-2015, 04:05 PM   #25
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: New member with a 1960

you probably have an HO32, not a very friendly rear IMO, just because they only come in like two ratios and parts arent easy to find. I would pull the axles and have them filled/redrilled for 5 lug. probably around $100-150.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com