Help with the size of hubcap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C4UC101969 · 07-23-2020, 09:02 PM

Guys need y'all input, I am wondering what is the back size of the dog dish hubcaps in the picture and where is a good and reliable place to get them from. Thank you for any help.

**special-K** · 07-24-2020, 06:22 AM

I never needed to measure a hubcap. Same size as 1/2t trucks is all I know. Other than Corvair and other smaller car wheels like early ChevyII, you have the car/half ton truck size and you have the 8-lug size, bigger obviously and obviously bigger. My first '72 I bought in '73 I put those same hubcaps on 8"/10" steel wheels. I've read that the car/half ton caps are 10 1/4" I think it was. They will fit any 5 or 6-lug GM truck with nub style wheels.

Here are '54s mounted on the rollers under my '67 project. I beleve they were the first nub-type Chevy caps

flashed · 07-24-2020, 07:11 PM

Those look like 55 Chevy Dog Dish caps , maybe look on a Tri Five site .

bry593 · 07-24-2020, 09:14 PM

10-1/8 is Ford and Chevy small cap (1/2 ton and car)
11-7/8 is Ford and Chevy big cap (3/4 and 1 ton)

Basically, Ford and Chevy interchange. Dodge cars had a smaller cap. Not sure about the Mopar trucks.

07-23-2020, 09:02 PM	#1
C4UC101969 Registered User Join Date: Aug 2018 Location: BARRIE, Ontario Posts: 118	Help with the size of hubcap Guys need y'all input, I am wondering what is the back size of the dog dish hubcaps in the picture and where is a good and reliable place to get them from. Thank you for any help. Attached Images __________________ 1969 'Matte Blackie' Oshawa Built Chevy C10 Stepside 307 three-on-the-tree

07-24-2020, 06:22 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Help with the size of hubcap I never needed to measure a hubcap. Same size as 1/2t trucks is all I know. Other than Corvair and other smaller car wheels like early ChevyII, you have the car/half ton truck size and you have the 8-lug size, bigger obviously and obviously bigger. My first '72 I bought in '73 I put those same hubcaps on 8"/10" steel wheels. I've read that the car/half ton caps are 10 1/4" I think it was. They will fit any 5 or 6-lug GM truck with nub style wheels. Here are '54s mounted on the rollers under my '67 project. I beleve they were the first nub-type Chevy caps Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2020, 07:11 PM	#3
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Help with the size of hubcap Those look like 55 Chevy Dog Dish caps , maybe look on a Tri Five site .

07-24-2020, 09:14 PM	#4
bry593 Registered User Join Date: May 2016 Location: Oklahoma Posts: 189	Re: Help with the size of hubcap 10-1/8 is Ford and Chevy small cap (1/2 ton and car) 11-7/8 is Ford and Chevy big cap (3/4 and 1 ton) Basically, Ford and Chevy interchange. Dodge cars had a smaller cap. Not sure about the Mopar trucks. __________________ 1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.