New 64 Stepper Project - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 08-11-2021, 08:23 AM

Nope, not an amp gauge, changed it to a voltage gauge, changed the oil gauge as well. Well the weather people say it hit 98 yesterday but who counting?
Ya it's 100amp alright, 3 wire (actually 4 with the ground). And the only reason I got that was because it was a regulated 3 wire. I'm going to get a clamp on DC meter and see what it's actually doing in a couple places.

**MT65** · 08-11-2021, 10:52 PM

Quote:

Originally Posted by The Rocknrod

Nope, not an amp gauge, changed it to a voltage gauge, changed the oil gauge as well. Well the weather people say it hit 98 yesterday but who counting?
Ya it's 100amp alright, 3 wire (actually 4 with the ground). And the only reason I got that was because it was a regulated 3 wire. I'm going to get a clamp on DC meter and see what it's actually doing in a couple places.

Good to hear, to nice of a build to go up in flames over a factory gauge…

**The Rocknrod** · 08-29-2021, 08:38 AM

So I went to a car show yesterday that turned out to be bigger than I have seen in the past, people must want out lately.

Anyway I came home with two awards (felt kind of guilty).

**Joe Pass** · 08-29-2021, 08:50 AM

congrats...well deserved....

**MT65** · 08-29-2021, 09:52 AM

Most likely won’t be the last..its a great truck…..

**The Rocknrod** · 08-29-2021, 10:32 AM

Quote:

Originally Posted by Joe Pass

congrats...well deserved....

Quote:

Originally Posted by MT65

Most likely won’t be the last..its a great truck…..

Thank you gentlemen.

Good thing I don't live near Joe.

**cwcarpenter98** · 08-29-2021, 10:37 PM

That's exciting, congrats! Well deserved too for all the work you've done to it

**cwcarpenter98** · 09-02-2021, 04:25 PM

Party time over here for the newest Truck of the Month!

Well deserved!

aggie91 · 09-02-2021, 05:05 PM

Congrats on the show awards and Truck of the Month!

**The Rocknrod** · 09-26-2021, 07:43 AM

Got in my lowered seat brackets and my seat is perfect for me.

forestb · 09-26-2021, 05:54 PM

What makes them trick? Have they been shortened? Never mind I guess I missed something.

**The Rocknrod** · 09-26-2021, 06:41 PM

I screwed up. Theyre FCF Brackets
https://full-custom-fabrication.squa...ng-brackets/10

**pdxhall** · 09-29-2021, 11:51 AM

Congrats on the show awards and truck of the month. This is a much deserved start and I predict far from the last.

**The Rocknrod** · 09-29-2021, 02:32 PM

Thanks my friend.
I've been sick, caughing and tired etc. Found i had pneumonia in one lung. I'm on meds and getting better but it's slow and miserable.
I want to go to a show this weekend so we'll see how it goes.

forestb · 10-07-2021, 04:46 PM

Quote:

Originally Posted by The Rocknrod

Installed the speaker, cant even tell it's in there. And The cowl leaf/trash screen is in there also.

how did you attach the screen under the cowl vent?

**Joe Pass** · 10-07-2021, 04:52 PM

Get well......

forestb · 10-07-2021, 04:57 PM

Quote:

Originally Posted by Joe Pass

Get well......

Ditto

SCOTI · 10-07-2021, 05:42 PM

x3.

350TacoZilla · 10-07-2021, 06:48 PM

Take care of yourself man, always be another show when your feeling better.

**The Rocknrod** · 10-17-2021, 11:33 PM

Felt better so i went to a show saturday. Best of show truck.

The coolest thing i got was a drawing a local child put in my truck.

**cwcarpenter98** · 10-18-2021, 12:06 AM

Congrats on the win!! I remember drawing trucks like that way back when. I bet that kid will grow up to like C10s one day

**The Rocknrod** · 10-18-2021, 06:25 AM

Quote:

Originally Posted by cwcarpenter98

Congrats on the win!! I remember drawing trucks like that way back when. I bet that kid will grow up to like C10s one day

No doubt in my mind.

**Joe Pass** · 10-18-2021, 08:18 AM

Nice....

**The Rocknrod** · 10-18-2021, 08:41 AM

So I'm out yesterday cleaning my tires and this guy drives up in a medium blue Z28 1969 Camaro with white stripes and says he wants to trade my truck for his car. I looked at his car and it wasn't as nice. A few things wrong, too loud, console was worn, dash was cut (radio), wrong hoses in engine compartment, A-arms and frame took like they were painted with a corn broom, very dirty engine compartment. He swears it's a numbers matching car but I'll have to pass on this one. Looked like this one:

**Joe Pass** · 10-18-2021, 10:00 AM

you made a better choice......

08-11-2021, 08:23 AM	#551
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Nope, not an amp gauge, changed it to a voltage gauge, changed the oil gauge as well. Well the weather people say it hit 98 yesterday but who counting? Ya it's 100amp alright, 3 wire (actually 4 with the ground). And the only reason I got that was because it was a regulated 3 wire. I'm going to get a clamp on DC meter and see what it's actually doing in a couple places. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-11-2021 at 09:19 AM.

08-29-2021, 08:38 AM	#553
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I went to a car show yesterday that turned out to be bigger than I have seen in the past, people must want out lately. Anyway I came home with two awards (felt kind of guilty). Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-29-2021, 08:50 AM	#554
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project congrats...well deserved.... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

08-29-2021, 09:52 AM	#555
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: New 64 Stepper Project Most likely won’t be the last..its a great truck…..

08-29-2021, 10:37 PM	#557
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: New 64 Stepper Project That's exciting, congrats! Well deserved too for all the work you've done to it __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

09-02-2021, 04:25 PM	#558
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: New 64 Stepper Project Party time over here for the newest Truck of the Month! Well deserved! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

09-02-2021, 05:05 PM	#559
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: New 64 Stepper Project Congrats on the show awards and Truck of the Month! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

09-26-2021, 07:43 AM	#560
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got in my lowered seat brackets and my seat is perfect for me. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 09-26-2021 at 06:42 PM.

09-26-2021, 05:54 PM	#561
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,583	Re: New 64 Stepper Project What makes them trick? Have they been shortened? Never mind I guess I missed something.

09-26-2021, 06:41 PM	#562
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I screwed up. Theyre FCF Brackets https://full-custom-fabrication.squa...ng-brackets/10 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-29-2021, 11:51 AM	#563
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,057	Re: New 64 Stepper Project Congrats on the show awards and truck of the month. This is a much deserved start and I predict far from the last. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

09-29-2021, 02:32 PM	#564
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thanks my friend. I've been sick, caughing and tired etc. Found i had pneumonia in one lung. I'm on meds and getting better but it's slow and miserable. I want to go to a show this weekend so we'll see how it goes. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-07-2021, 04:52 PM	#566
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Get well...... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

10-07-2021, 05:42 PM	#568
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,907	Re: New 64 Stepper Project x3. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-07-2021, 06:48 PM	#569
350TacoZilla Registered User Join Date: Sep 2010 Location: Hancock Md Posts: 386	Re: New 64 Stepper Project Take care of yourself man, always be another show when your feeling better.



Register or Log In To remove these advertisements.

10-17-2021, 11:33 PM	#570
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Felt better so i went to a show saturday. Best of show truck. The coolest thing i got was a drawing a local child put in my truck. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-18-2021, 12:06 AM	#571
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: New 64 Stepper Project Congrats on the win!! I remember drawing trucks like that way back when. I bet that kid will grow up to like C10s one day __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-18-2021, 08:18 AM	#573
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Nice.... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

10-18-2021, 08:41 AM	#574
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I'm out yesterday cleaning my tires and this guy drives up in a medium blue Z28 1969 Camaro with white stripes and says he wants to trade my truck for his car. I looked at his car and it wasn't as nice. A few things wrong, too loud, console was worn, dash was cut (radio), wrong hoses in engine compartment, A-arms and frame took like they were painted with a corn broom, very dirty engine compartment. He swears it's a numbers matching car but I'll have to pass on this one. Looked like this one: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-18-2021, 10:00 AM	#575
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project you made a better choice...... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

Register or Log In To remove these advertisements.