The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-30-2010, 05:55 PM   #26
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

doors
Attached Images
     
Bugeyev8 is offline   Reply With Quote
Old 08-31-2010, 12:26 AM   #27
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Looks good

You're making some nice progress.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-31-2010, 12:54 AM   #28
amueller454
Registered User
 
amueller454's Avatar
 
Join Date: Oct 2009
Location: Ogden, Utah
Posts: 149
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Nice work so far!

i noticed on the interior side of the door where you have the holes for the speakers that the two body lines stop before. what did you do to change the ends of the body lines?
__________________
1960 short bed fleetside factory 4x4
1960 panel 454 NV4500 Daily driver
1961 Short Bed BBW Fleetside 5.3 th400 swap in process
amueller454 is offline   Reply With Quote
Old 08-31-2010, 02:55 AM   #29
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Quote:
Originally Posted by amueller454 View Post
Nice work so far!

i noticed on the interior side of the door where you have the holes for the speakers that the two body lines stop before. what did you do to change the ends of the body lines?
Good eye, its the little details..

I cut the rib in the center and re shaped the metal and welded it up, I did not really want to cut the holes but really there is no other way if you want decent sound and it gave me acess to clean and treat the rust and I actually Por 15 the inside of the doors and installed dynamat too
Bugeyev8 is offline   Reply With Quote
Old 08-31-2010, 02:56 AM   #30
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Quote:
Originally Posted by Captainfab View Post
Looks good

You're making some nice progress.
Thanks man !! the progress is very very slow. its hard to stay motivated on this thing
Bugeyev8 is offline   Reply With Quote
Old 08-31-2010, 06:49 AM   #31
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,625
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Nice work on all the repairs and modifications. It may seem tedious now, but it's going to look great when your finished. Your family legacy will live on.
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 09-02-2010, 03:02 PM   #32
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

got the hood sprayed with epoxy high build...needed to get some protection on the metal..because of my lazy ass not venting the dryer properly...everything in the garage gets a nice coating of rust, still needs alot of work
Attached Images
    
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 03:05 PM   #33
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

did the tailgate mods a while back, got a perfect tailgate...this pos was the test bed
Attached Images
     
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 03:10 PM   #34
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

lots of work in these damn things, I have 6 of these things and these are the only set that fit right, little rust repair and body work and coated the insides with por 15, filled the emblem holes while at it, these are straighter now than they were from the factory !!
Attached Images
   
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 03:15 PM   #35
Chris65GMC
Registered User
 
Join Date: Mar 2010
Location: Philadelphia, PA
Posts: 84
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Looks Really good! Any chance you could do a step by step on the rocker replacement?

Thanks!

Chris
Chris65GMC is offline   Reply With Quote
Old 09-02-2010, 03:22 PM   #36
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Quote:
Originally Posted by Chris65GMC View Post
Looks Really good! Any chance you could do a step by step on the rocker replacement?

Thanks!

Chris
I don't know if I have enough pics to do that

I am not a big pic taker, I will see what I can find

I have been doing this for a long time, what are you wanting to know?
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 03:46 PM   #37
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

step one
was to remove the old rocker...I see alot of prople trying to grind and drill the spot welds out...this is a waste of time, cut the outer rocker in smaller pieces using a cutoff wheel or tin snips, as to make it easier to remove, the smaller pieces allow you to just twist and pull the spot welds loose, the panels I worry about distorting I take a flapp disk and grind the spot weld area down, the metal will turn blue very fast when its getting thin..then just use a chisel and a vise grip and pull the old metal off, along the lower rocker spot wekds cut the rocker so that just about 1/2 inch of teh rocker is there, then take your chisel and start between a pair of spot welds and start to roll the metal up with your vise grips like you are opening a tin can, rock the vise grips when you come to a spot weld and the spot weld will break, remember spot welds are only strong in multiples , a single one is very easy to break

step 2

Grind and clean all loose rust and grind all spot welds down, clean and treat metal with metal etch, I used phosphoric acid and then treated al areas where I was not going to weld with POR15

Step 3
if you are just doing the rocker test fit and use a few screws to align it while you are working, be sure to have the door installed and adjusted before fitting the rocker , its very IMPORTANT to have the door installed, I had to massage the new rocker in the front where it slips over the pillar to fit perfect, if you are using a mig welder drill holes on the new rocker where the old one has spot welds, I used a spot welder along the lower seam, don,t weld anything till you are happy with the fit

step 4
weld it up and grind to your liking then shoot with epoxy primer and then seam seal and another coat of epoxy

If you are changing the inner rocker you will need to do that first, I fabbed the inner rocker and the repair panel for the kick panel and floor, I ordered a inner rocker from LMC and then Brothers and was not happy, the floor was rotted more than it would cover, and I did not want to buy a whole floor section...so I just fabbed it up, templates out of cardboard and then off to the brake with some 18 gauge

Just be sure to fit everything before you weld anything, use sheet metal screws, the inner rocker goes on first and then the pillar support and then the outer rocker

I will dig up more pics if I have them and post them for you
Attached Images
    
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 03:50 PM   #38
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

more pics
Attached Images
     
Bugeyev8 is offline   Reply With Quote
Old 09-02-2010, 04:33 PM   #39
Hanky
Registered User
 
Hanky's Avatar
 
Join Date: Aug 2010
Location: Temple, TX
Posts: 24
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Man am I glad I found this build. Looks fantastic. I will be sure to use your wisdom as refrence for my 62' Thanks in advance. Damn shame you are not in Texas lol!


Hanky
Hanky is offline   Reply With Quote
Old 09-03-2010, 12:15 PM   #40
Chris65GMC
Registered User
 
Join Date: Mar 2010
Location: Philadelphia, PA
Posts: 84
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Quote:
Originally Posted by Bugeyev8 View Post
more pics
Thanks! this is a great start. Is it ok to do the inner and outer rocker with the door on?

Thanks!

Chris
Chris65GMC is offline   Reply With Quote
Old 09-03-2010, 01:59 PM   #41
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Quote:
Originally Posted by Chris65GMC View Post
Thanks! this is a great start. Is it ok to do the inner and outer rocker with the door on?

Thanks!

Chris
The door will have to come off to do the work. also the front fender will need to be removed if your door fits good now...you may want to drill some alignment holes in the hinges, I use a 1/8 drill bit, makes it faster to get the door back on in the correct place
Bugeyev8 is offline   Reply With Quote
Old 09-03-2010, 02:02 PM   #42
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

other side pics
Attached Images
     
Bugeyev8 is offline   Reply With Quote
Old 09-03-2010, 02:04 PM   #43
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

more
Attached Images
   

Last edited by Bugeyev8; 09-03-2010 at 02:06 PM.
Bugeyev8 is offline   Reply With Quote
Old 09-04-2010, 12:47 AM   #44
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Yes the door will need to be removed as Bugeyev8 said. However you will want to do one of two things when replacing the rockers. 1) if the original rocker is somewhat complete, take a couple measurements from the rocker to the top of the door opening. This way you can install the new rocker in the same location as the original. 2) you will need to re-install the door after you have the rocker clamped into place to check the lower door to rocker gap.


Quote:
Originally Posted by Chris65GMC View Post
Thanks! this is a great start. Is it ok to do the inner and outer rocker with the door on?

Thanks!

Chris
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-16-2010, 12:39 PM   #45
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

got some work done on the underside of the hood this week, stripped it to the metal and gave it a few shots of epoxy, still deciding about what to do..paint it color of truck...black or do a light spray of bedliner and then paint color of the truck ??
Attached Images
  
Bugeyev8 is offline   Reply With Quote
Old 09-16-2010, 11:08 PM   #46
narx66gmc
Registered User
 
Join Date: Sep 2005
Location: Bentonville, AR
Posts: 190
Re: My 1962 C10 Build Thread "Grandpa's Truck "

same color as your engine compartment will be. the project looks like it is coming along nicely.
__________________
Build Thread - Papa's truck build up

Last edited by narx66gmc; 09-16-2010 at 11:08 PM.
narx66gmc is offline   Reply With Quote
Old 09-29-2010, 08:30 PM   #47
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Got the rear bumper installed today, I fabbed the brackets and the hidden reciever hitch too, I used the smaller hitch because after I fabbed the bumper brackets where I wanted them I had no room for the 2 inch class 3, oh well in all the years of towing I never towed anything over the 4k rating on the reciever anyway...at least its in the done pile now !!
Attached Images
     
Bugeyev8 is offline   Reply With Quote
Old 09-29-2010, 08:31 PM   #48
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

more pics
Attached Images
   
Bugeyev8 is offline   Reply With Quote
Old 10-15-2010, 04:46 PM   #49
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Got a bit more work done on my 62 today, got the repaired hood test fitted...need a new DS hinge I guess...it wont pull down in the ds rear corner, got the interior sanded and prepped for paint, a little more sanding and a hit with pre paint cleaner and a few shots of epoxy and the gold interior color will fly, plan is to shoot the interior hang the new repaired doors , paint the jambs and the area around the glass and re install the interior and glass and drive it again for a while before I blow it apart for a full paint job
Attached Images
   
Bugeyev8 is offline   Reply With Quote
Old 10-18-2010, 05:44 PM   #50
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

got the inside of the cab prepped and primed with epoxy primer, block it tomorrow AM and shoot the color and then reassemble...the work never ends
Attached Images
   

Last edited by Bugeyev8; 10-18-2010 at 05:46 PM.
Bugeyev8 is offline   Reply With Quote
Reply

Bookmarks

Tags
1962, lsa supercharger, rust repair, tuned port

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com