Project Build Log: Ol Green - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JayDubBlazer · 06-22-2008, 10:16 PM

whoops posted wrong picture

**Yukon Jack** · 06-23-2008, 09:39 AM

Looks great! You've gotta be feeling pretty good about how it is looking.

JayDubBlazer · 06-23-2008, 05:15 PM

Quote:

Originally Posted by Yukon Jack

Looks great! You've gotta be feeling pretty good about how it is looking.

I am and can't wait to get it on the road. I figure that I am 85% done, the last 10% will take about a month, and the final 5% will be the rest of my life.

JayDubBlazer · 07-07-2008, 07:39 AM

I've got a little more done this weekend. Did as much as I could on Thrusday night and Friday morning. I was out of town for the rest of the weekend. I miss ordered and didn't get all of the rear right taillight and some bumpers ordered. I also found that one of the rollers off the window lift (the sissor part) has a busted roller. Do I need to purchase the entire assemble or is there some way to replace that roller? Other that that it is coming along. I am expecting a shipment from summit tomorrow and I will be able to finish most of the engine compartment. I hope to be able to at least turn over the engine this weekend.

JayDubBlazer · 07-07-2008, 07:40 AM

A couple more

Big J · 07-07-2008, 08:12 AM

Your K5 is lookin' great! I flipped through LMC, didn't see just a roller. I'm bettin' you have to buy the whole assembly.

**Yukon Jack** · 07-07-2008, 09:49 AM

Looking great. I sure seem to remember a rebuild kit or something available that would give you parts to replace a roller. I'd call a board vendor and ask them. Might be such a small part that it's not on their websites and in a catalog.

hgs_notes · 07-07-2008, 10:13 AM

You might check the parts stores for that roller. Sometimes they have those little do-dads on a rack, like door handles, throttle springs, door panel screws, etc. Those rollers are probably the same for most GM cars with manual roll up windows.

You are flying along on this build. I felt good about getting mine running in less than a year, and then here you are, making the rest of us look bad...

jaros44sr · 07-07-2008, 10:51 AM

Quote:

Originally Posted by hgs_notes

You might check the parts stores for that roller. Sometimes they have those little do-dads on a rack, like door handles, throttle springs, door panel screws, etc. Those rollers are probably the same for most GM cars with manual roll up windows.

You are flying along on this build. I felt good about getting mine running in less than a year, and then here you are, making the rest of us look bad...

I searched for awhile, then gave up and just bought the whole mechanism, seems like a waste as usually just the rollers go bad. Keep us posted...

JayDubBlazer · 07-08-2008, 10:53 PM

Well got a little more done today. I ran to the junk yard during my lunch and picked up some side markers from a 70-80's van. I really like the much smoother look of those lenses, it is something i've wanted to do for a while. I also got started on wiring up the electric fans and finishing the final terminations. I will admit I had a freind of mine come over and help me on the install of the window and running the lower radiator hose.

Chevyman63 · 07-09-2008, 06:25 AM

Looking good JayDub.

kman86 · 07-27-2008, 08:10 PM

hey man i finally got back on here. looks like now that i have a 70' ill be gettin on a lot more. good job with the blazer, sounds like your soon to get it out.

Long Roof · 07-28-2008, 07:51 PM

Those are the markers I have on my Jimmy. I like them as well. The blazer looks great. My guess is you didn't make July 2nd though.

JayDubBlazer · 08-24-2008, 01:16 PM

Well because of work and wedding season i haven't been able to work on the truck much. I did get out there yesterday for a while and hope to turn it over today or tomorrow night. So without further adew here are some more pics.

JayDubBlazer · 08-24-2008, 01:19 PM

Here is a couple of the exterior, i am really digging the new front end, it was kind of a PITA to install though.

**BAD4X4** · 08-24-2008, 01:22 PM

I'm loveing this thing!!!!!!!! Gr8 job!!!

JayDubBlazer · 08-24-2008, 01:24 PM

Here is the enterior with by side panels installed. I have pulled out the subfloor for my rear seats. I origally built it so i could store the poles and cover from a soft top underneath. I am going to clean it up and have it painted.

Big J · 08-24-2008, 10:18 PM

Lookin' good. How was the fit of the new outer grill? Did you have to massage it or did it fit nice on the first go? OEM or aftermarket? Well thats enough questions, lol... Great work.

JayDubBlazer · 08-25-2008, 07:37 AM

Quote:

Originally Posted by Big J

Lookin' good. How was the fit of the new outer grill? Did you have to massage it or did it fit nice on the first go? OEM or aftermarket? Well thats enough questions, lol... Great work.

The fit wasn't to bad. It was hard pop riveting it to the supports. I had to loosen up the entire front clip and use a spud wrench to aling the grill supports with the front fenders. It is an aftermarket.

JayDubBlazer · 09-04-2008, 08:39 AM

Well good news, I got it to turn over last night. I have fuel, and spark, just need to get it aligned and timed. After that I have to bleed the brakes, fix the shifter on the the column, I think I might have painted a little to much and now its really gummy. Then I just need to set up the 700R4 and its on the road. AWE-YEAH

**Yukon Jack** · 09-04-2008, 09:15 AM

Great progress - you'll be driving it before you know it!

Jtrux · 09-04-2008, 10:28 AM

Cool, I like it.

Bentblazer · 09-04-2008, 09:23 PM

Found Window Regulator Rollers in ClassicParts.com Catalog 4 Vol 6 page 22, 2.95 a set

BLUE THUNDER · 09-04-2008, 10:37 PM

Looks awesome. The interior is fantastic. I really want to see more pics of the rear seat frame you made. I think i'm gonna do something similar. Later, Mario.

JayDubBlazer · 09-05-2008, 07:26 AM

Quote:

Originally Posted by BLUE THUNDER

Looks awesome. The interior is fantastic. I really want to see more pics of the rear seat frame you made. I think i'm gonna do something similar. Later, Mario.

Thanks for the compliments. I don't know how far I will get on the frame before driving season ends. I still don't know how or what type of material I will use to create the floor and the storage area door. I do have some second row seat backs from a 78 suburban that I might use but still need to do some figgering and measuring.

06-22-2008, 10:16 PM	#51
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green whoops posted wrong picture Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

06-23-2008, 09:39 AM	#52
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Project Build Log: Ol Green Looks great! You've gotta be feeling pretty good about how it is looking. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-07-2008, 07:39 AM	#54
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green I've got a little more done this weekend. Did as much as I could on Thrusday night and Friday morning. I was out of town for the rest of the weekend. I miss ordered and didn't get all of the rear right taillight and some bumpers ordered. I also found that one of the rollers off the window lift (the sissor part) has a busted roller. Do I need to purchase the entire assemble or is there some way to replace that roller? Other that that it is coming along. I am expecting a shipment from summit tomorrow and I will be able to finish most of the engine compartment. I hope to be able to at least turn over the engine this weekend. Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

07-07-2008, 07:40 AM	#55
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green A couple more Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

07-07-2008, 08:12 AM	#56
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Project Build Log: Ol Green Your K5 is lookin' great! I flipped through LMC, didn't see just a roller. I'm bettin' you have to buy the whole assembly. __________________ BAZINGA! My Build

07-07-2008, 09:49 AM	#57
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Project Build Log: Ol Green Looking great. I sure seem to remember a rebuild kit or something available that would give you parts to replace a roller. I'd call a board vendor and ask them. Might be such a small part that it's not on their websites and in a catalog. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-07-2008, 10:13 AM	#58
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Project Build Log: Ol Green You might check the parts stores for that roller. Sometimes they have those little do-dads on a rack, like door handles, throttle springs, door panel screws, etc. Those rollers are probably the same for most GM cars with manual roll up windows. You are flying along on this build. I felt good about getting mine running in less than a year, and then here you are, making the rest of us look bad... __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-08-2008, 10:53 PM	#60
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green Well got a little more done today. I ran to the junk yard during my lunch and picked up some side markers from a 70-80's van. I really like the much smoother look of those lenses, it is something i've wanted to do for a while. I also got started on wiring up the electric fans and finishing the final terminations. I will admit I had a freind of mine come over and help me on the install of the window and running the lower radiator hose. Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT Last edited by JayDubBlazer; 07-08-2008 at 10:54 PM. Reason: spelling

07-09-2008, 06:25 AM	#61
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Project Build Log: Ol Green Looking good JayDub. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

07-27-2008, 08:10 PM	#62
kman86 Registered User Join Date: Dec 2007 Location: Silex, MO Posts: 2	Re: Project Build Log: Ol Green hey man i finally got back on here. looks like now that i have a 70' ill be gettin on a lot more. good job with the blazer, sounds like your soon to get it out.

07-28-2008, 07:51 PM	#63
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Project Build Log: Ol Green Those are the markers I have on my Jimmy. I like them as well. The blazer looks great. My guess is you didn't make July 2nd though. __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

08-24-2008, 01:16 PM	#64
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green Well because of work and wedding season i haven't been able to work on the truck much. I did get out there yesterday for a while and hope to turn it over today or tomorrow night. So without further adew here are some more pics. Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

08-24-2008, 01:19 PM	#65
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green Here is a couple of the exterior, i am really digging the new front end, it was kind of a PITA to install though. Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

08-24-2008, 01:22 PM	#66
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: Project Build Log: Ol Green I'm loveing this thing!!!!!!!! Gr8 job!!! __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

08-24-2008, 01:24 PM	#67
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green Here is the enterior with by side panels installed. I have pulled out the subfloor for my rear seats. I origally built it so i could store the poles and cover from a soft top underneath. I am going to clean it up and have it painted. Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT



Register or Log In To remove these advertisements.

08-24-2008, 10:18 PM	#68
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Project Build Log: Ol Green Lookin' good. How was the fit of the new outer grill? Did you have to massage it or did it fit nice on the first go? OEM or aftermarket? Well thats enough questions, lol... Great work. __________________ BAZINGA! My Build

09-04-2008, 08:39 AM	#70
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Project Build Log: Ol Green Well good news, I got it to turn over last night. I have fuel, and spark, just need to get it aligned and timed. After that I have to bleed the brakes, fix the shifter on the the column, I think I might have painted a little to much and now its really gummy. Then I just need to set up the 700R4 and its on the road. AWE-YEAH __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT Last edited by JayDubBlazer; 09-04-2008 at 08:40 AM. Reason: spelling

09-04-2008, 09:15 AM	#71
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Project Build Log: Ol Green Great progress - you'll be driving it before you know it! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-04-2008, 10:28 AM	#72
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Project Build Log: Ol Green Cool, I like it. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

09-04-2008, 09:23 PM	#73
Bentblazer Registered User Join Date: Sep 2007 Location: Rolla Mo. Posts: 667	Re: Project Build Log: Ol Green Found Window Regulator Rollers in ClassicParts.com Catalog 4 Vol 6 page 22, 2.95 a set __________________ "85" Monte Carlo SS "71" K5 (SOLD) "64" Chevelle 1930 Chevy two door rat

09-04-2008, 10:37 PM	#74
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: Project Build Log: Ol Green Looks awesome. The interior is fantastic. I really want to see more pics of the rear seat frame you made. I think i'm gonna do something similar. Later, Mario.

Register or Log In To remove these advertisements.