How about some pics of Static dropped 60-66 - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

forestb · 06-26-2022, 09:05 PM

I have gone as low as 5.5 inches in the rear without it bottoming out on the rear axle. 4 in drop coils and 1.5 in blocks. It did not bottom out until I did a 6 in drop.

**MT65** · 06-30-2022, 09:50 AM

Stock spindles, on 86 front xmember and coilovers on all 4 corners

EricS76 · 06-30-2022, 07:10 PM

1966 longbed fleetside. 4” front (2” spring, 2” spindle). 7” rear (5” spring, 2” block). 235/75R15 tires.

lgh1157 · 07-01-2022, 09:48 AM

Quote:

Originally Posted by islander671

Just kidding, but seriously though lowered it finally. 2 inch blocks to come. A before and after shot

Love this truck

Do you have to notch the rear frame ?

Thx

**PowerdbyChevy79** · 07-07-2022, 05:45 PM

Heres my 66...

theastronaut · 07-08-2022, 05:12 PM

Front- CPP drop spindles, one coil cut off the stock springs, bump stop bracket completely removed from the LCA, KYB Gas-A-Just shocks, stock 15x5.5" wheels, 1.5' bolt on wheel spacers, 215/75 tires. No rubbing over bumps or when turning full lock.

Rear- D2600 bags bolted directly to the trailing arms, top has short cups to make room for the air fitting. 1.5" drop blocks to keep the bags from being as compressed at ride height. Bump stop shortened but it only has about 1.5" of travel at this height so I need to do a 2" pipe notch. Shocks relocated via the Frizzle Fry method. 8" wheels, 235/75 tires.

Angrywood · 07-09-2022, 04:36 PM

Just finished my 3 in drop

lgh1157 · 07-09-2022, 04:58 PM

Join Date: Aug 2008
Location: atlanta GA
Posts: 49

Re: How about some pics of Static Dropped C-10's
Picked this up 2 weeks ago

Went to town on it

2.5 CPP Drop Spindles

3-5 Coils

15" Wheel Vintiques with 205/75 Cokers

Gonna add a 2" block and add a bolt on notch on the rear to get it a bit more level

( i thought i already posted on this thread, but couldn't see it on here )

**PowerdbyChevy79** · 01-03-2023, 01:31 AM

Quote:

Originally Posted by theastronaut

Front- CPP drop spindles, one coil cut off the stock springs, bump stop bracket completely removed from the LCA, KYB Gas-A-Just shocks, stock 15x5.5" wheels, 1.5' bolt on wheel spacers, 215/75 tires. No rubbing over bumps or when turning full lock.

Rear- D2600 bags bolted directly to the trailing arms, top has short cups to make room for the air fitting. 1.5" drop blocks to keep the bags from being as compressed at ride height. Bump stop shortened but it only has about 1.5" of travel at this height so I need to do a 2" pipe notch. Shocks relocated via the Frizzle Fry method. 8" wheels, 235/75 tires.

Love it... love the color

Arne · 01-03-2023, 01:40 PM

'64 Short Step conversion (born as long Fleet), shortened and lowered by prior owner. I was told 3" both F and R all with POL springs. Wheels are 15x8 with 275/60R15.

Name: DSC_0001.jpg
Views: 419
Size: 52.1 KB

Name: DSC_0001.jpg
Views: 419
Size: 52.1 KB

Name: DSC_0002.jpg
Views: 422
Size: 51.2 KB

Name: DSC_0004.jpg
Views: 420
Size: 57.0 KB

**pdxhall** · 01-03-2023, 02:34 PM

Here's mine. 2 1/2" drop spindles and 1" drop coi;s in front and 5" drop springs in the rear with 17" rims.
'

TGRAY · 01-14-2024, 08:08 PM

My 62 Shorty with 3/4 drop. 3" on torsion bars and 4" drop springs on rear.

06-26-2022, 09:05 PM	#826
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,584	Re: How about some pics of Static dropped 60-66 I have gone as low as 5.5 inches in the rear without it bottoming out on the rear axle. 4 in drop coils and 1.5 in blocks. It did not bottom out until I did a 6 in drop.

06-30-2022, 09:50 AM	#827
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 437	Re: How about some pics of Static dropped 60-66 Stock spindles, on 86 front xmember and coilovers on all 4 corners Attached Images

06-30-2022, 07:10 PM	#828
EricS76 Registered User Join Date: May 2004 Location: Llano,TX Posts: 113	Re: How about some pics of Static dropped 60-66 1966 longbed fleetside. 4” front (2” spring, 2” spindle). 7” rear (5” spring, 2” block). 235/75R15 tires. Attached Images __________________ ‘66 Chevy C-10, long bed fleetside, 350, 3 on the tree, 4-7 drop. '77 chevy C-10 Custom Deluxe, 350, SM465 4 speed, flatbed. '80 jeep CJ-5. ‘14 Chevy 1500 Z71…

07-07-2022, 05:45 PM	#830
PowerdbyChevy79 Senior Member Join Date: Apr 2013 Location: Houston,Tx Posts: 738	Re: How about some pics of Static dropped 60-66 Heres my 66... Attached Images __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1976 C35 Sierra Grande "Mr. Harvey" 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 1982 C10 Silverado "Lucy" C10 Club Texas -HMIC

07-08-2022, 05:12 PM	#831
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,868	Re: How about some pics of Static dropped 60-66 Front- CPP drop spindles, one coil cut off the stock springs, bump stop bracket completely removed from the LCA, KYB Gas-A-Just shocks, stock 15x5.5" wheels, 1.5' bolt on wheel spacers, 215/75 tires. No rubbing over bumps or when turning full lock. Rear- D2600 bags bolted directly to the trailing arms, top has short cups to make room for the air fitting. 1.5" drop blocks to keep the bags from being as compressed at ride height. Bump stop shortened but it only has about 1.5" of travel at this height so I need to do a 2" pipe notch. Shocks relocated via the Frizzle Fry method. 8" wheels, 235/75 tires. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-09-2022, 04:36 PM	#832
Angrywood Registered User Join Date: Mar 2019 Location: Orange County ca Posts: 162	Re: How about some pics of Static dropped 60-66 Just finished my 3 in drop Attached Images

07-09-2022, 04:58 PM	#833
lgh1157 Registered User Join Date: Aug 2008 Location: atlanta GA Posts: 70	Re: How about some pics of Static dropped 60-66 Join Date: Aug 2008 Location: atlanta GA Posts: 49 Re: How about some pics of Static Dropped C-10's Picked this up 2 weeks ago Went to town on it 2.5 CPP Drop Spindles 3-5 Coils 15" Wheel Vintiques with 205/75 Cokers Gonna add a 2" block and add a bolt on notch on the rear to get it a bit more level ( i thought i already posted on this thread, but couldn't see it on here ) Attached Images

01-03-2023, 01:40 PM	#835
Arne Registered User Join Date: Sep 2022 Location: Eugene, OR Posts: 490	Re: How about some pics of Static dropped 60-66 '64 Short Step conversion (born as long Fleet), shortened and lowered by prior owner. I was told 3" both F and R all with POL springs. Wheels are 15x8 with 275/60R15. __________________ . - Arne Finished Project - 1964 C10 Stepside, mild restomod ———————————— Last edited by Arne; 05-31-2023 at 01:16 AM.

01-03-2023, 02:34 PM	#836
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,058	Re: How about some pics of Static dropped 60-66 Here's mine. 2 1/2" drop spindles and 1" drop coi;s in front and 5" drop springs in the rear with 17" rims. ' Attached Images __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

01-14-2024, 08:08 PM	#837
TGRAY Registered User Join Date: Nov 2020 Location: St Thomas Ontario Posts: 1	Re: How about some pics of Static dropped 60-66 My 62 Shorty with 3/4 drop. 3" on torsion bars and 4" drop springs on rear. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.