The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-14-2021, 03:14 PM   #1
Registered User
Join Date: Apr 2015
Location: Richmond Hill Ontario Canada
Posts: 46
Fuse Block RUN and Crank Source?

I have my LS PCM and wiring harness mounted inside the cab of my truck. I see many videos showing the distributor wire is hooked up to the pink switched ignition of the LS harness. I get that

However being located inside of the cab can I tie the switch 12V+ pink wire from my Ls harness into one of the unused IGN ports on the stock truck fuse block?

Basically what I'm asking is does that pink distributor wire from the engine bay branch off to the IGN terminals on the inside (cab side) of the fuse block instead of connecting it to the wire located in the engine bay.
1986 Chevy Fleetside Wrangler (Canadian Only)
brian1115 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 07:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020