"Project 64" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 11-23-2009, 12:09 AM

That's cool you 2 are working things out and you have your truck (frame) at your house.

jgh64pkup · 11-24-2009, 12:11 AM

Quote:

Originally Posted by daverod

That's kinda what I thought. I think I remeber seeeing that thread. I was just hoping there was a number stamped on the gears or somthing. I don't know what gears I have.

there is two numbers stamped on the ring gear like 41 & 10 that would be a 4:10 ring and pinion
you divide the larger number by the smaller number

daverod · 11-24-2009, 12:50 AM

Quote:

Originally Posted by jgh64pkup

there is two numbers stamped on the ring gear like 41 & 10 that would be a 4:10 ring and pinion
you divide the larger number by the smaller number

Thanks gage I'll go see what I have.

**Captainfab** · 11-24-2009, 02:10 AM

There is also the part number and the date stamped into the ring gear. You just have to separate them so they make sense.

Quote:

Originally Posted by jgh64pkup

there is two numbers stamped on the ring gear like 41 & 10 that would be a 4:10 ring and pinion
you divide the larger number by the smaller number

independentcustoms · 11-24-2009, 09:57 AM

Man, that original notch was scary!

ruffrida2005 · 12-30-2009, 06:37 PM

well it had been awhile since I've posted anything. i have been working on my new back half, I got it mostly together and welded it. got to put some crossbrace in it, and start my gas tank mount. I'm at my parents so when i get back to my house I'll try to get them posted. for some reason my SD card wasnt working in my laptop. I'll give it a try again.

1971gmcshortbed · 01-02-2010, 11:46 PM

Where did you get your fuel cell?

ruffrida2005 · 01-03-2010, 01:01 AM

got it from Summit 20 gal cell. I used to go to school at Onate!

ruffrida2005 · 01-03-2010, 01:03 AM

alright guys I got a ? I have a chance to get a 3.08 with carrier for my truck with the trade of my 4.10s to him. I wanna run 3.42 but it will be awhile before I can get the gears. Do yall think it would be worth it to get. Also I'm trying to buy his wishbone setup for $100. So I might be having some more to work on.

1971gmcshortbed · 01-03-2010, 01:05 AM

Crazy man, small world I live off hiway 70, 2 miles from Onate,

jgh64pkup · 01-03-2010, 01:05 AM

ill trade you some 3.08s and some 3.73s for those 4.10s

ruffrida2005 · 01-03-2010, 01:09 AM

well let me find out from this other guy and will see what's up Gage. shiping is going to cost since he's in OH

jgh64pkup · 01-03-2010, 01:14 AM

what differential

ruffrida2005 · 01-03-2010, 01:30 AM

you still have those gears in the diff or are they out. My 4.10's are still in the 64 diff. and if they are in the diffs what year are they? I was the shorter 12 bolt

jgh64pkup · 01-03-2010, 02:02 AM

no theyre not bolted to them but they are sitting right beside
they are 67-68

ruffrida2005 · 01-03-2010, 02:13 AM

well I just went and counted the ring and gear, I was told they were 4.10's well they are 3.73's

jgh64pkup · 01-03-2010, 02:16 AM

damn
are you absolutely sure?

ruffrida2005 · 01-03-2010, 02:29 AM

I can count, and they have 11-41 stamped on them.

jgh64pkup · 01-03-2010, 02:30 AM

damn

ruffrida2005 · 01-03-2010, 02:31 AM

yeah tell me about it. so you still wanna swap the 3.08's since I have a 3 series carrier.

jgh64pkup · 01-03-2010, 02:32 AM

sure
whats a 3 series carrier

ruffrida2005 · 01-03-2010, 02:35 AM

that's what holds your gears, they have 2,3,4 and I think 5 series. diffrent gears fit in those ranges. 3.08 - 3.73 are in the 3 series. dont quote me on those gears but I believe those are it.

jgh64pkup · 01-03-2010, 02:45 AM

oh now i remember
i think the 3.08s are in a different series than a 3.73
i had 3.08s in mine and i had to change them to 3.73s to fit my gov lock

ruffrida2005 · 01-03-2010, 03:04 AM

well your right, 3 series is from 2.76 - 3.42 I guess I still need a 3 series.

jgh64pkup · 01-03-2010, 03:06 AM

and you have a 4 series i guess or maybe a 2?

11-23-2009, 12:09 AM	#1
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: "Project 64" That's cool you 2 are working things out and you have your truck (frame) at your house. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

11-24-2009, 09:57 AM	#5
independentcustoms Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 133	Re: "Project 64" Man, that original notch was scary!

12-30-2009, 06:37 PM	#6
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" well it had been awhile since I've posted anything. i have been working on my new back half, I got it mostly together and welded it. got to put some crossbrace in it, and start my gas tank mount. I'm at my parents so when i get back to my house I'll try to get them posted. for some reason my SD card wasnt working in my laptop. I'll give it a try again. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-02-2010, 11:46 PM	#7
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: "Project 64" Where did you get your fuel cell?

01-03-2010, 01:01 AM	#8
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" got it from Summit 20 gal cell. I used to go to school at Onate! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 01:03 AM	#9
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" alright guys I got a ? I have a chance to get a 3.08 with carrier for my truck with the trade of my 4.10s to him. I wanna run 3.42 but it will be awhile before I can get the gears. Do yall think it would be worth it to get. Also I'm trying to buy his wishbone setup for $100. So I might be having some more to work on. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 01:05 AM	#10
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: "Project 64" Crazy man, small world I live off hiway 70, 2 miles from Onate,

01-03-2010, 01:05 AM	#11
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" ill trade you some 3.08s and some 3.73s for those 4.10s __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 01:09 AM	#12
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" well let me find out from this other guy and will see what's up Gage. shiping is going to cost since he's in OH __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 01:14 AM	#13
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" what differential __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 01:30 AM	#14
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" you still have those gears in the diff or are they out. My 4.10's are still in the 64 diff. and if they are in the diffs what year are they? I was the shorter 12 bolt __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 02:02 AM	#15
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" no theyre not bolted to them but they are sitting right beside they are 67-68 __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 02:13 AM	#16
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" well I just went and counted the ring and gear, I was told they were 4.10's well they are 3.73's __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 02:16 AM	#17
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" damn are you absolutely sure? __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 01-03-2010 at 02:16 AM.

01-03-2010, 02:29 AM	#18
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" I can count, and they have 11-41 stamped on them. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

01-03-2010, 02:30 AM	#19
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" damn __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 02:31 AM	#20
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" yeah tell me about it. so you still wanna swap the 3.08's since I have a 3 series carrier. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 02:32 AM	#21
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" sure whats a 3 series carrier __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 02:35 AM	#22
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" that's what holds your gears, they have 2,3,4 and I think 5 series. diffrent gears fit in those ranges. 3.08 - 3.73 are in the 3 series. dont quote me on those gears but I believe those are it. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 02:45 AM	#23
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" oh now i remember i think the 3.08s are in a different series than a 3.73 i had 3.08s in mine and i had to change them to 3.73s to fit my gov lock __________________ Gage 1967 C10 Shortbed Stepside

01-03-2010, 03:04 AM	#24
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: "Project 64" well your right, 3 series is from 2.76 - 3.42 I guess I still need a 3 series. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-03-2010, 03:06 AM	#25
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: "Project 64" and you have a 4 series i guess or maybe a 2? __________________ Gage 1967 C10 Shortbed Stepside

Register or Log In To remove these advertisements.