Need help with coilover mounts

[Ctimrun]

We have a TCI four link/coilover setup installed on our 3100. I do not believe the coilovers have the proper mounting hardware. The top and bottom of the shocks are sliding on the mounts causing the shocks to bind.

I was thinking about a washer on the inside (of the shock mount) to hold it in place but I’m not sure that’s the solution. If I am going to have to modify what’s there I want to do it the right way.

I have left a message and email with TCI, but in the meantime I am hoping someone can give me some suggestions on the proper way these should be mounted, and where to buy the parts if necessary.

Any help would be greatly appreciated!