The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 07-13-2009, 12:06 PM   #76
thebrown83
Registered User
 
thebrown83's Avatar
 
Join Date: Sep 2007
Location: Kingfisher OK
Posts: 176
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

actually these don't fit on the 88-98s either. My friend bought 18x9.5s for his 97 silverado and they would not go all the way over the front hub to sit flat. He had to return them and get boss 335s which look good also and actually fit.
thebrown83 is offline  
Old 07-13-2009, 01:42 PM   #77
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Quote:
Originally Posted by chuckmc8 View Post
The only other thing to check is if 88 & up spindles (with these smaller rotors & brake components)
would work on 67-72 suspensions.....if not, the grinding/lathe turning proceedure will be the only way to run these wheels.
Maybe useless info, but it doesnt cost anything to gather......and maybe help someone else

This works but you have to change a few things. The 88 up lower ball joint is larger in diameter in the part that presses into the lower a arm. It is the same diameter as the ones for a 3/4 ton lower a arm. The upper ball joint mounts the same as the 71-87 upper ball joint so that the upper a arm will work. You would need to change to a 3/4 ton lower a arm and use teh 88-up ball joints, otherwise it works...
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline  
Old 07-14-2009, 05:25 PM   #78
nlped
Senior Member
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,147
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Hhhhmmm! I actually have a pair of 18x9.5 338's sitting next to me that I am using on the rear of my '87 and am waiting on the 18x8's to come in. I know they won't fit directly onto my set up, but I'm gonna try "fabbing" up a sealed hub/slide on rotor type hub. We shall see!
nlped is offline  
Old 07-15-2009, 07:48 AM   #79
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Does anyone have Wilwood or Baer brakes/rotors on their truck? I would be interested to know if any aftermarket disc brake rotors would work.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline  
Old 07-15-2009, 08:52 AM   #80
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

I have baer on mine, if you want to provide me the measurement from the back of the boss wheel to where the cap mounts and the diameter I will check for you. I don't run these wheels but have an interest in them.

Dano
greystoke is offline  
Old 07-15-2009, 09:23 AM   #81
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

That would be great greystoke.
I actually took some measurements the other day.

On the wheel itself:
From the wheel mounting flange to the opening (where the chrome boss cap snaps in) is 2-5/8" tall.

The rotor center hub height is 2" tall with the dust cap removed.
(these are auto parts 5-lug rotors purchased locally)

At the end of the rotor hub (where the dust cap presses on) the diameter is approximately 2.800". This is using my cheap plastic dial calipers that I have at home.

The diameter of the opening of the wheel (where the center hub dust cap sticks thru) is only 2.410".

If you could measure your Baer rotors center hub "height" (minus the dust cap),... and a diameter of the center hub, (right at the base of the dust cap),... that would be great!
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Last edited by lolife99; 07-15-2009 at 09:37 AM.
lolife99 is offline  
Old 07-15-2009, 09:29 AM   #82
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

I will check this out, I'm at work right now. My first thought is that there will still be a fitment problem but I've been wrong before and will be again.
greystoke is offline  
Old 07-15-2009, 10:41 PM   #83
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

ok lowlife99....I pulled the tire off and looked at the baer front hub. I don't have a fancy measuring deal so with a tape this is what I have.

From the face of the rotor ( where the wheel mounts ) to the hub edge is about 1 7/8"

Same spot to the end of the spindle nut is about 2 1/2"

The hub at the top is about 2 3/4" outside to outside.

The problem is there is a step at the base of the hub which is probably a tad over 3", it would seem the opening of the Boss 338 wheel would need to be machined a bit larger. that seems like a viable option.

Last edited by greystoke; 09-25-2009 at 10:54 AM.
greystoke is offline  
Old 07-15-2009, 10:51 PM   #84
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Thanks for checking. I appreciate all your effort.
Which Baer kit do you have?
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Last edited by lolife99; 07-15-2009 at 10:52 PM.
lolife99 is offline  
Old 07-15-2009, 10:58 PM   #85
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Baer GT

what do you think about machining the mounting flange hole a little bigger. I don't know if it's such a good idea.
greystoke is offline  
Old 07-15-2009, 11:49 PM   #86
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

I would rather machine on the rotor,... but there is a step inside the wheel center,... that appears to be causing some interference. It will be awhile before I address these issues, but I will be looking at Wilwood's website to try to find out more.
Thanks again.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline  
Old 07-16-2009, 07:12 AM   #87
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

then there's always the simple route of using a spacer. I feel once it cleared the step it would fit fine.
greystoke is offline  
Old 07-16-2009, 07:32 AM   #88
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

I'm not using a spacer.
The 8.5" wheel with a 5.25" BS is perfect for me.
It would be easier for me to machine a disc rotor "style" hub,... that use a disc rotor "hat", that slides over a seperate hub.
Maybe the big brake kit from McGaughys.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Last edited by lolife99; 07-16-2009 at 07:38 AM.
lolife99 is offline  
Old 07-17-2009, 04:35 PM   #89
BlueJeep
Registered User
 
BlueJeep's Avatar
 
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

How does the finish and quality appear to be on these wheels. Looks like a VERY reasonably priced wheel...which has peaked my interest as well!
__________________
build threads:

86 Suburban
88 Jeep 6.0 swap
49 Chevy truck
54 Chevy wagon

86 Suburban lowered 4/6
54 Chevy wagon
49 Chevy/s10 mix
88 Jeep Wrangler rockcrawler
BlueJeep is offline  
Old 07-17-2009, 04:46 PM   #90
nlped
Senior Member
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,147
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

The finish of the wheel is great. The lack of a thick mounting pad is kinda dumb though.
nlped is offline  
Old 07-18-2009, 02:22 AM   #91
69gmcshorty
Registered User
 
69gmcshorty's Avatar
 
Join Date: Jun 2009
Location: Eugene, Oregon
Posts: 104
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

SUBSCRIBED. I am fairly new to the site but my career is in wheels and tires. I have a boss dealer that we "deal" with and i am in love with the wheels. I will have a chat with him tomorrow if their open on saturdays and see what he has to say about future upgrades.
__________________
1969 gmc swb 5/7ish drop, 350/th400, 20x8.5 F.20x10" R
69gmcshorty is offline  
Old 07-19-2009, 10:46 AM   #92
rodstored-72
chevy truck fan
 
rodstored-72's Avatar
 
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 1,954
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

i am glad that people are sharing these issues on here. it is good to be a member of a board & have people actually give real life issues. i am looking for wheels as well & for a long time now, because i am not wanting any "fitment" issues. i guess i am old fashioned" that way... after reading all this i am wondering with all the issues for the wheel to fit what exactly was the original vehicle application intent from boss?? and i guess the same question for the coy's as well?? do the majority of manufact. just make wheels to "fit" on camaros & mustangs??? i would think that if i was making a wheel nowa days i would see about making a wheel to "fit" our trucks & the such & if needed "charge" a little more to make up for the "mods" needed to fit. anyways it seems that for all the trouble i have read & heard about getting what seems to be the most "popular" wheels to fit these trucks it would be in a manufact. good interest to see what could be done. i myself still like the idea of buying something for a vehicle & it fit!!! i am not saying that what is being discussed here is the buyer's fault or is, i just always here about wheels not fitting our trucks & wish that it is was "easier" to get a great wheel & not have to modify anything. anyways sorry if it sounds like a rant & i dont want to hijack i just really like the wheels & wished it wasn't soooo complicated to use them.. good post anyways thanks!!!
rodstored-72 is offline  
Old 07-20-2009, 05:39 PM   #93
69gmcshorty
Registered User
 
69gmcshorty's Avatar
 
Join Date: Jun 2009
Location: Eugene, Oregon
Posts: 104
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

I spoke with our rep. and they have just recently he said in the past week changed the design to fit out trucks. in his footnotes they have all the problems and issues people have been having and now there new design that is coming out have a larger hub bore and a thicker mounting pad to allow the dust cap to stay unmodified and the wheel fit perfect with no spacers or machining of the rotor. NOW: i was asking only for the 20x8.5 all chrome but i assume that they will make changes to all. they are +14mm offset and 5.239 b/s.

NOW I JUST NEED THE OK FROM THE OLD LADY TO BUY THEM
__________________
1969 gmc swb 5/7ish drop, 350/th400, 20x8.5 F.20x10" R
69gmcshorty is offline  
Old 07-20-2009, 05:47 PM   #94
au03z71
Registered User
 
au03z71's Avatar
 
Join Date: Jul 2006
Location: alabama
Posts: 647
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Quote:
Originally Posted by 69gmcshorty View Post
I spoke with our rep. and they have just recently he said in the past week changed the design to fit out trucks. in his footnotes they have all the problems and issues people have been having and now there new design that is coming out have a larger hub bore and a thicker mounting pad to allow the dust cap to stay unmodified and the wheel fit perfect with no spacers or machining of the rotor. NOW: i was asking only for the 20x8.5 all chrome but i assume that they will make changes to all. they are +14mm offset and 5.239 b/s.

NOW I JUST NEED THE OK FROM THE OLD LADY TO BUY THEM
The skeptic inside me is still saying wait until someone buys and tries these on our trucks... Waiting and watching...
au03z71 is offline  
Old 07-20-2009, 05:52 PM   #95
nlped
Senior Member
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,147
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

That would be great. I'll call the "local" Boss/Eagle wheel distributor and verify this tomorrow. I really have myself convinced that I want these wheels. I'll let you guys know as soon as I know.

Ed
__________________
Carter

1968 Chevy SWB Fleet... Walt


1963-1/2 Ford Falcon Futura...Martha
nlped is offline  
Old 07-20-2009, 06:34 PM   #96
chuckmc8
It's alsways something.....
 
chuckmc8's Avatar
 
Join Date: Nov 2008
Location: Douglasville GA
Posts: 1,171
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

"I spoke with our rep. and they have just recently he said in the past week changed the design to fit out trucks."

It would be great to know when the new design will be available so that
those interested can start saving our coins for that group buy.......

Last edited by chuckmc8; 07-20-2009 at 06:36 PM.
chuckmc8 is offline  
Old 07-20-2009, 06:42 PM   #97
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,675
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

How are you going to know if you are getting the "new design" or the "old design" (that is taking up space on their shelves)?
I would hope they are a different part number.
Also,... what are the "reps" saying the old wheel fits? Nothing? Impala SS/Caprice?
Just wondering,...
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Last edited by lolife99; 07-20-2009 at 06:43 PM.
lolife99 is offline  
Old 07-20-2009, 07:27 PM   #98
nlped
Senior Member
 
nlped's Avatar
 
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,147
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

They also fit some of the Jeep Grand Cherokees . I think the SS/Caprices have a bearing type front rotor as well...so they wouldn't work on them either.
__________________
Carter

1968 Chevy SWB Fleet... Walt


1963-1/2 Ford Falcon Futura...Martha
nlped is offline  
Old 07-20-2009, 07:30 PM   #99
Security guy
Registered User
 
Security guy's Avatar
 
Join Date: Mar 2008
Location: Sarasota, Fl.
Posts: 441
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Awesome! I wonder to if they stop making the 'old style' or if they are just making a new one with a different part number? If they are just replacing the old with the new, it may be a while before the new wheel is available?
Security guy is offline  
Old 07-20-2009, 07:59 PM   #100
RED65
Registered User
 
RED65's Avatar
 
Join Date: Feb 2009
Location: charlotte, nc
Posts: 27
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5

Quote:
Originally Posted by lolife99 View Post
How are you going to know if you are getting the "new design" or the "old design" (that is taking up space on their shelves)?
I would hope they are a different part number.
Also,... what are the "reps" saying the old wheel fits? Nothing? Impala SS/Caprice?
Just wondering,...
I just read this. Sounds like you had the same problem I did with my Colorado Custom wheels and I just took the rotors to a machine shop and they turned the hub down so the wheel would set. Hope this helps.
RED65 is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com