Correct bolt hole location for Sport mirrors ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Green Machine** · 11-07-2005, 12:12 AM

I think this has been posted before but can't find it. Want to add factory (repo) sport mirrors to my 70. IIRC the passenger side is set farther back, right ? Also does the factory ocation work well ? Thanks in advance.

Stroker · 11-07-2005, 10:11 PM

The picture is the factory RH sport mirror placement as located on my 72 C10 measured from the front edge of the door. The penciled line is one inch below the door body line. Looks like the drivers side is 1.3 inches further forward, per the assy manual. Hope this helps.

**Green Machine** · 11-21-2005, 12:27 AM

Getting ready to drill some holes, anyone have any other suggetions on where to mount the sport mirrors, just would like some assurance whether the factory locations are the best, or if you can cheat some and make it better. Doors are off of truck and cab is stripped now so it would be kinf of hard to eyeball it now, I'm about 6'2" tall if that makes any difference in mirror placement - Thanks again.

Bill72BB · 11-21-2005, 02:24 AM

Here is a pic of the Left and Right side , I used the Factory assembly manuel to measure , annd they do mount slightly different . Ignore the old guy in the reflection

MrC1 · 11-21-2005, 10:59 AM

TIP: Mount the psgr side mirror as high as you can in the "normal" mounting position range. It will make it easier to see.

11-07-2005, 12:12 AM	#1
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Correct bolt hole location for Sport mirrors ? I think this has been posted before but can't find it. Want to add factory (repo) sport mirrors to my 70. IIRC the passenger side is set farther back, right ? Also does the factory ocation work well ? Thanks in advance. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

11-07-2005, 10:11 PM	#2
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Re: Correct bolt hole location for Sport mirrors ? The picture is the factory RH sport mirror placement as located on my 72 C10 measured from the front edge of the door. The penciled line is one inch below the door body line. Looks like the drivers side is 1.3 inches further forward, per the assy manual. Hope this helps. Attached Images __________________ 72 SWB parts and pieces Oklahoma

11-21-2005, 12:27 AM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Correct bolt hole location for Sport mirrors ? Getting ready to drill some holes, anyone have any other suggetions on where to mount the sport mirrors, just would like some assurance whether the factory locations are the best, or if you can cheat some and make it better. Doors are off of truck and cab is stripped now so it would be kinf of hard to eyeball it now, I'm about 6'2" tall if that makes any difference in mirror placement - Thanks again. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

11-21-2005, 02:24 AM	#4
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Re: Correct bolt hole location for Sport mirrors ? Here is a pic of the Left and Right side , I used the Factory assembly manuel to measure , annd they do mount slightly different . Ignore the old guy in the reflection Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , Last edited by Bill72BB; 11-21-2005 at 02:25 AM.

11-21-2005, 10:59 AM	#5
MrC1 Dork For Days Join Date: Aug 2005 Location: Dallas Posts: 407	Re: Correct bolt hole location for Sport mirrors ? TIP: Mount the psgr side mirror as high as you can in the "normal" mounting position range. It will make it easier to see. __________________ 1972 C20, 402/700R4 - My first classic truck, bought in September 2005. 85% transformed from "Farm" to "Cool" status! 1970 Dodge Challenger 440, 4sp (my other toy) 12.67 @ 117 MPH, with a pathetic 2.022 60' 2007 Dodge Charger SRT-8 2008 Cadillac CTS All-American garage, baby!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.