The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-14-2021, 04:27 AM   #1
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 8,533
McGaughys Lowering Parts

After 15 or so years of trying to decide whether or not to want to I called Summit yesterday and ordered 2 1/2 lowered front spindes with a 4 inch rear dropped spring and trac bar etc. for my truck. Has anyone here used McGaughys stuff for lowering and am looking for real world comments. Bought all new front end parts last year so thought well the front end is going to be torn apart for the new tie rods, ball joints etc so though if I'm ever going to lower the truck now would be the time. Some of you may remember I did a poll last year, link below, on whether to use the 15 inch rallys or the 17 inch Torque Thrusts and have decided as I had at the end of my Poll Thread to use the 15 inch rallys with 255/70 15 tires. Now to decide to redo the rallys in the original argent color or go with the darker gray like the pictured one.

https://67-72chevytrucks.com/vboard/...d.php?t=811597
Attached Images
    
__________________
1972 C10 Custom/Deluxe 613 Highlander 350/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" Worry does not take away tomorrows troubles, it takes away today's peace


RIP Glenn Frey 1948-2016
Already Gone is offline   Reply With Quote
Old 01-14-2021, 07:47 AM   #2
Minkota
Registered User
 
Join Date: Jun 2016
Location: West Palm Beach, Florida
Posts: 191
Re: McGaughys Lowering Parts

I have McGaughys Front & Rear Springs, & Spindles on my truck. I did not have any issues during installation back in 2016, and after 4 years of driving the truck I have not had any issues yet.
Minkota is offline   Reply With Quote
Old 01-14-2021, 09:48 AM   #3
72afr
Beep! Beep!
 
72afr's Avatar
 
Join Date: Nov 2003
Location: Rural, MO
Posts: 166
Re: McGaughys Lowering Parts

I have McGaughy's front 2.5 spindles and rear 3" springs on mine. Also running 15" ralleys. The only issue I can recall was needing to grind a bit on the lower A arm for clearance. I can't recall now what was impacting, but have had no issues since.
__________________
1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport
2003 Chevrolet 2500HD CC 6.0 4wd
2006 GMC Yukon Denali (the wife's baby hauler)
2004 Jeep Rubicon (fun vehicle #2)
72afr is offline   Reply With Quote
Old 01-14-2021, 06:04 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 19,776
Re: McGaughys Lowering Parts

It's common for some possible trimming on the lower a-arm 'gutters' when using drop spindles. Usually, a minor buzz w/a 60grit flap disc on an angle grinder will get the job done. You want to make sure there's enough gap so the wheel lip & wheel weights clear w/o issue. If you need to do this, just don't cut it w/a sharp/90 cut. Buzz away w/the flap disc as needed keeping the edges broad vs. sharp.

It's a toss of the coin if it needs to be done when using stock wheels & more common w/aftermarket wheels have increased back-spacing.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides

Building a small, high rpm engine
with the perfect bore, stroke and rod ratio is very impressive...
like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.

Cubic inches is like Indiana Jones with a cheap pistol....
SCOTI is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com