The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-21-2012, 04:07 PM   #1
cppursell
Registered User
 
cppursell's Avatar
 
Join Date: Dec 2008
Location: San Francisco, CA
Posts: 144
Vacuum advance issues

Hey folks,

I recently put a 307 in my '67 C10. I put on a 2bbl rochester carb, with an HEI distributor. It consistently hesitated acceleration, and wanted to die when cold. I eventually found out through a mechanic friend that the timing is way off because there's no port vacuum on the (older) carb, and that the manifold vacuum was messing up the timing on the HEI. I had retarded it myself so it wouldn't ping, but when it's set right, it pings a lot under acceleration and freeway speeds.

He said I can disconnect the vacuum advance and just change the mechanical advance curve until I find something that works. I bought a timing kit and plan to reduce the advance, but I wanted to know you're opinion of just using mechanical advance, or if I should just get a new carb with port vacuum, or anything else!
My goal is to have the most efficient option for better economy. Will mechanical advance alone run the engine efficiently enough?
cppursell is offline   Reply With Quote
 

Bookmarks

Tags
307, advance, carburetor, hei, timing

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com