My Dusty 71 GMCe Electruck

[Gregski]

Electric Car Components:

1. VCU - Vehicle Control Unit (the brain, the controller)
2. Inverter - converts DC to AC electricity
3. Motor - or transmotor as I like to call our Unicorn
4. Throttle - any hall effect throttle pedal will do

[Gregski]

and here they are minus the transmission (apparently rolling a transmission across a hardwood floor in our house is frowned upon, who knew?!)

[Gregski]

and here it is with some labelization:

[Blue GMC]

Now how are you going to run your accessories. At min you need lights but I figure you will want ps pb wipers and a radio?

[Gregski]

Originally Posted by Blue GMC

Now how are you going to run your accessories. At min you need lights but I figure you will want ps pb wipers and a radio?

Excellent question, all electrical stays the same (lights, windshield wipers, etc) since we are keeping the regular 12 volt car battery (all electric cars retain a standard 12 volt car battery believe it or not), and we will be using a Converter instead of an alternator to charge it, the Converter steps down the 360 volts DC down to 12

we will use either a Volvo or some other brand of electric power steering pump, this is a very common swap, and keep our current stock steering box

we will use an electric vacuum pump to provide vacuum to our stock brake booster

the challenge will be the heater as it needs to be replaced with an electric element but there are a couple options for that as well

and what's a "radio"? lOl

[Gregski]

Originally Posted by Blue GMC

Now how are you going to run your accessories. At min you need lights but I figure you will want ps pb wipers and a radio?

love it when you guys pay attention, so...

2018 HONDA CRV POWER BRAKE BOOSTER WITH MODULE 46000-TLA-A051-M1 OEM 17 18 19

[CG]

Im not big in to electric vehicles, but Im not against them either. I think its a cool build you have going. Most of its over my head, but still cool =)

[Gregski]

Originally Posted by CG

Im not big in to electric vehicles, but Im not against them either. I think its a cool build you have going. Most of its over my head, but still cool =)

thanks I totally get it, I was like that before I did my first LS Swap, I was a Holley Carb Guy Fer Life, that was a few swaps ago, ha ha

[Gregski]

excited to share a quick video of the transmotors first spin

Lexus GS450h Transmission Motor First Spin

yes my videos suck, I'm still learning

[Kronald_70GMC]

Originally Posted by Gregski

excited to share a quick video of the transmotors first spin

Lexus GS450h Transmission Motor First Spin

yes my videos suck, I'm still learning

[Gregski]

Originally Posted by Kronald_70GMC

Thanks Kyle I appreciate that, the next Phase will be to get all the wiring done/connected on the workbench (pronounced: "garage floor") we will also work on getting some sort of a mechanical contraption made to lock the input shaft so that Motor Generator #1 aka MG1 can then spin the output shaft along with MG2 (more horse powers)

[Kronald_70GMC]

Originally Posted by Gregski

Thanks Kyle I appreciate that, the next Phase will be to get all the wiring done/connected on the workbench (pronounced: "garage floor") we will also work on getting some sort of a mechanical contraption made to lock the input shaft so that Motor Generator #1 aka MG1 can then spin the output shaft along with MG2 (more horse powers)

Sounds confusing......... Maybe I will learn something.

[Gregski]

Originally Posted by Kronald_70GMC

Sounds confusing......... Maybe I will learn something.

nah, it's just planetary gears

[BigBird05]

Have you thought about putting in a fake engine to confuse people?

[geunther]

I checked the youtube vid. Nice work. It has to be gratifying.

[Gregski]

Originally Posted by geunther

I checked the youtube vid. Nice work. It has to be gratifying.

thanks mate I had it spinin' last week, not braggin' just sayin' but since my laptop never showed me being in Park I thought I did something wrong, so I kept fumblin' with the Neutral Switch wiring, and testing, and testing, until I asked around the other folks who have done it, and they said, no worries mate the Laptop will never show you when it is in Park it only show's you when it is in Drive or Reverse

yup, I will never get the hours I lost to the transmission Safety Neutral Switch that week, ha ha

[Gregski]

Originally Posted by BigBird05

Have you thought about putting in a fake engine to confuse people?

so the wife and I joke about doing just the opposite, leave the engine bay completely bare, drive the truck to a car show, park it, and pop the hood open, then bust out some lawn chairs and sit there for a few hours sipping some cold drinks, then at the end of the show, after everyone's walked by and taken a peak, shut the hood and drive off... [ahem] quietly

I bet a lot of folks who paid attention would have a WTH moment, ha ha

[Dieselwrencher]

Instead of an electric PS pump, how about an electric PS unit from a saturn vue or another GM vehicle that can go in the steering shaft?

[Gregski]

Originally Posted by Dieselwrencher

Instead of an electric PS pump, how about an electric PS unit from a saturn vue or another GM vehicle that can go in the steering shaft?

Yes sir, but you know me I take baby steps and work in phases, so first we may just get it running and driving and then regroup and do just what you suggested, sky's the limit.

One obstacle I think is that most of the true electric Power Steering giddy ups are for a rack and pinion setup and we have ourselves a 100 year old steerin' box.

but keep the ideas comin' and The Greg loves linky links, ha ha

[Dieselwrencher]

Originally Posted by Gregski

Yes sir, but you know me I take baby steps and work in phases, so first we may just get it running and driving and then regroup and do just what you suggested, sky's the limit.

One obstacle I think is that most of the true electric Power Steering giddy ups are for a rack and pinion setup and we have ourselves a 100 year old steerin' box.

but keep the ideas comin' and The Greg loves linky links, ha ha

A friend of mine put on on his cougar big block ford powered race car and he said it works awesome. It has a conventional non power steering gear box on it too. Another friend put one in a 50s dodge truck that had a stock non power gear box and he said the same thing. I'm really considering one on my 40 Ford. No belt to mess with and one less thing to leak.

[Gregski]

Originally Posted by Dieselwrencher

No belt to mess with and one less thing to leak.

Oh trust me, I am all about the PLS delete.

Pavement Lubrication System RPO


[the seed has been planted] 02-07 Saturn Vue point 'n' shoot stick

[biketopia]

There's a thread on LS1 tech about adding electric power steering to any car for $35. It's quite informative https://ls1tech.com/forums/suspensio...er-issues.html

[Gregski]

Originally Posted by biketopia

There's a thread on LS1 tech about adding electric power steering to any car for $35. It's quite informative https://ls1tech.com/forums/suspensio...er-issues.html

thanks great link!

[Gregski]

I wanna show you guys something pretty cool

the Controller board comes with a tiny red WiFi card! so we are going to solder that header connector to the board next (baby steps) I could have added all the gizmos to this board when it first arrived but I wanted to isolate and keep the complexity down to a minimum, plus I wanted to confirm what all is needed to spin up the motors and what is none essentially hopefully you guys and gals follow that logic

not bad for Government work! ha ha

[Gregski]

alright so what does that Why Five card give you?

well glad you asked, or at least were thinking that, it gives US instant gauges!